im wondering is it possible to install a hitatchi 1tb drive in my imac g5 because i think read somewhere that the hitatchi 750gb drive wasnt 1,5gbs Compatable i dont know if this applies to the 1tb drive
View 1 Replies
I just installed a new Hitachi 500gb that replaced my old Hitachi 120gb. My hard drive was replaced about 1 1/2 years ago at the apple store. Now that it has died i was told to order a new hard drive less than 1 terribite (i know it's misspelled). I replaced it and pressed alt at boot and the disc appeared and I clicked it...selected ENGLISH and then went next...was ask to select where do i want this to info installed but it had nothing for me to select. it's obvious it's not recognizing my new hard drive. I can't go any further. Then when I select installer from the menu and select start up disc it shows an X on my MAC OX S installation disc 1??Could this be because when they gave me a new hard drive they used their discs...I don't know... I really don't wanna go BACK to the MAC store..
Info:
MacBook, Mac OS X (10.4.9)
I recently picked up an iMac G3 with a 600 MHz G3 Processor and a slot-loading CD-RW drive. It had 10.2.8 and 9.2.2 installed. I went into the startup disk menu in system preferences and tried to restart in 9.2.2 and be adventerous. But it would just flash a floppy disk with a ? mark. No matter what I did I could not get back to Mac OS X. I also have a MacBook with Tiger restore CDs. I tried to install that on there but could not and decided to see if it would work if I erased the drive. It did not. So now I have an iMac G3 with a blank hard drive and a Cd drive and a mind that is completely clueless about what to do!
View 3 Replies View RelatedHow can I do this? I have an iMac G3 @ 333Mhz with a broken CD Drive. I have a retail panther box with all of the disks. I have a MBP if that helps. Do I need to buy a new drive?
View 2 Replies View RelatedUsually MacBooks come with Hitachi drives, and I'm wondering if it's possible to install a hard drive onto a MacBook Pro (2.4ghz Unibody) that isn't a Hitachi. (Western Digital, ...)
Would there be driver problems (Heating up, ...) and also the hard drive free-falling locking feature be disabled?
I just wanted to double check that this HD will work in the iBook G4, I dont see any reason why it wouldn't.[URL]
View 1 Replies View RelatedToday I was transferring files from my unibody Macbook Pro over to my 1TB 7200RPM SATA 3.0 Gb/s Hitachi external hard drive. The files were almost transferred when I accidently knocked the drive off of my bed and onto the carpet floor which disconnected the drive's USB cable from my laptop.
Now when I turn the drive on it continuously clicks and beeps and my macbook won't recognize it. I found this video on youtube and it shows exactly what my external drive is doing.
[URL]
I have a ton of important data on this drive and I really don't want to lose it. What should I do? Could I take the drive to my nearby Apple Store?
Last week I recieved my 27" iMac i7 2,93GHz with the 2TB Hitachi Drive.
I ordered this drive because it was said in this forum that this one should be silent.
Now, during access it is not really silent, but thats no problem
What bothers me more is, that there is a permament silent hum. An I can fell this vibration even on the stand (hopefully this is the correct term, I am from Austria, so english is not my native language).
And this vibration is also forwarded onto the table, but it is not really feelable on the table.
So my question is: Some say that their iMac is "dead silent". Mine isn�t, I also can here the fans silently, but that doesn�t bother me either. But this humming is somewhat distracting or annoying.
Maybe I am just to "picky", but do you really have iMacs which are almost inaudible?
Because I do not have any other problems I am not sure whether I should ask for a replacement.
I want to upgrade the hard drive of my MBP 13'' 2.26 Ghz. What would be a better choise (performance, noise,...): Hitachi, Fijitsu or Scorpion?
View 3 Replies View RelatedHow do I export pictures from Mac Book Air to a Hitachi external hard drive. I have used the export function from i-photo but it will not transfer. However, when I use the export function to put the pictures onto a 4g usb stick it works?
Info:
MacBook Air
I just installed it in my late 2008 uMBP. It's SUPER fast! Best upgrade ever.
Does anyone know if this drive has head parking (or whatever they call it)? Should I disable the SMS in the MBP?
I upgraded my Mac Book Pro hard drive to a Hitachi 7200RPM 300GB Hard Drive in November. All of a sudden my Hard drive is full and I cannot explain why. I retrieved the folder size info from the six folders I have on my HD and it claims that I have filled up roughly 100GB on the hard drive. I understand the MAC OS X is roughly 4-5GBs, roughly another 15GB for threading the utility files, so I should still have at least 180GB of space free on the hard drive. I recently downloaded the application known as AZUREUS aka VUZE could this app have put some extraordinarily large hidden folders on my hard drive? I deleted this app but my HD is still stating that I have used up 278GB of space which I know cannot be right. Can anyone out there help me with this situation? I am lost and upset not sure what is going on. According to my hard disk utility I only have 2.6GB of space availble which is insane!
One more note around xmas I found that my MAC had crashed unexpectedly but is working fine right now expect for the fact the HD is full and I can only see roughly 100GB of files on my 300GB Hard drive.
I'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I have a 12" powerbook that is running 10.2 and want to upgrade it to Tiger. The problem is that the DVD drive is broken so I can't pop in my copy and install. Is there any way for me to install it using a USB external hard drive?
View 4 Replies View RelatedIs there any way to install a 3rd internal hard drive to my PowerMac G5 dual 1.8?
View 9 Replies View RelatedI have an old PowerMac G4 7400 (450 Mhz) and I'd like to use it to replace an old Micron PC I'm using as a file server. My question is, what is the largest size HD I can install in it? I checked Mactracker and it said it only supported up to 128 GB per drive. But I didn't know if this was related to the OS at the time or whether it was a hardward limitation. If I'm running Tiger on it would it support a larger 500GB drive? If it is a hardware limitation I guess I could always add a couple external firewire drives. Let me know if this should have been posted in the "collectible forum".
View 4 Replies View RelatedI put my Leopard install DVD (DVD drive is down) onto a flash drive to install on my 12" PowerBook G4 1.5ghz but when it restarts it just boots back into Tiger. I attempted to reboot and hold option but the only boot choice is the HD. Even if I go to Preferences>Startup Disk there's no option to boot from the Flash Drive.
View 2 Replies View RelatedI have an old iMac Rev A (or B?) and it is constantly freezing. It freezes in OS 8, 9, and 10.3.. but most frustrating is that it also freezes while trying to install an OS. So right now it does not have an OS installed because of that. It will not boot up to my OS 9.1 disc.. but it will boot up to it's original 8.5 disc and a 10.3 disc.. However it always freezes near the beginning of the install process (often before it even writes to the HDD). I tried taking out the old RAM and leaving it with just the one (new) 256MB chip and that didn't work.
It was freezing before with only the old RAM so. I guess it's not the RAM. I have an identical iMac that doesn't choke on anything (never freezes) and it only has 96MB of RAM. I don't know what else I can do. I'm trying to use XPostFacto to put 10.4 on this thing (it's possible, I want to try it out at least) but it won't get through the first OS install and if it does, it won't get through the second (10.4). Even more frustrating is that I don't have any diagnostic software such as the Apple Hardware Test because the original iMac didn't come with any.
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
I have a PPC iBook G4 with 1.3 Ghz and 1 GB SDRAM that I bought new in 2006. I've never had a single problem with the machine, but it doesn't have a superdrive and the OS Tiger capabilities are limiting.
Last year I upgraded to Leopard with a .dmg via FW external drive and loved the interface, but with only a 40GB HD I deleted any app I didn't need. Over the summer I bought a new iMac, but I still need the laptop whenever I'm away from my desk. I tried erasing and reinstalling now that I don't have to keep much data on the drive...interested in getting back those non-essential apps. I've done it before with the exact same resources, but this time it's not working. I'm hoping someone out there can tell me what step I'm forgetting.
Here's what I've done:
1. Connected iBook to iMac in target mode via FW and erased/partitioned HD in Apple Partition Format.
2. Reinstalled Tiger on iBook from original disc.
3. Connected iBook to external drive via FW and restored .dmg to smaller partition on iBook.
4. Opened .cdr on smaller partition, saw the Leopard disc image, set the Leopard install disc as the startup disc in System Preferences. Hit restart button in System Preferences and got the little "not happeneing" noise.
5. Went to desktop and opened the Leopard installer disk image and pressed the install/restart button there. Reboot was slow and dark at first, but ultimately booted Tiger.
6. Went back to System Preferences, selected Leopard install disc as the startup disc again, locked the selection and restarted...booted Tiger again.
7. Tried these tactics again while holding option key and then S key at restart, but the second partition with the installer was never recognized. Tried from Safe Mode, only booted Tiger.
8. Then I tried connecting the external drive again and opened the .dmg, then .cdr from there. Again System Preferences recognized the installer, but it would not boot with the same variables as before.
9. I connected the iBook to the iMac in target disc mode again and ran disc utility, all good. Then I did same with external drive, all good. I made sure both drives and the install disc image were bootable. Tried the boot again from both, all bad.
10. I did a lot of reading on troubleshooting this process and thought it might be a permissions problem, that the installer was not executable. I did a terminal tutorial and managed to make the partitioned drive and disc image both owner enabled. Still the exact same results as when I started.
I have a g3 dual usb ibook that has a DVD/CD drive, 640 ram and a firewire port. I just bought a G4 800 mhz tower that has a gig of ram, but it does not have DVD drive (it's a cdrw only). My Ilife install disk is a DVD, is there anyway to use the DVD drive on my ibook to install software onto the G4 tower? Both devices have firewire but if possible I would like to use an ethernet cable connection between the two. I dont have the correct firewire cable(it's expensive).
A second question is i an os 10.3 on my ibook and 10.4 on my G4 tower. Is there a easy way to transfer all my files, settings, ect... from the ibook to the G4 tower? I don have the osx 10.4 install discs either (if that matters).
I bought a G3 imac 600 from an auction. no cd's came with it. it has software on it with multiple user logins. I can only login to one user who didn't use a password but cannot login as the admin.
it is running os 9.2.2 and I would like to upgrade to osx.
I just bought the new 24" iMac and I looked at the backup discs and they said it could install OSX Tiger. I also have an old iBook G4 I got my moms friend who moved. I know the iBook could handle 10.4 as it has 10.3.9 now but what I was wondering was. If I could install the OS on the iBook from the iMac backup discs. I but the disc in the iBook and it wanted me to restart to begin the installation of OSX but I quickly backed out. Do you guys think If I proceed with the installation it will install smoothly or, should I just forget about it.
View 2 Replies View RelatedMy intel 2006 iMac recently died, and I'm wondering if I could one of the 1GB RAM sticks into the a G3 iMac I own. And more importantly: If I could put the hard drive from the intel iMac into the iMac G3.
The intel iMac was made in late 2006 and the iMac G3 was made in 1999, 1998 or 2000.
I've been in and out of these forums since last December. I bought my first MacBook and I couldn't be happier. Best computer ever! I am never going back to PC, and I'm trying to convert the rest of my family. I am starting with the most difficult hill to climb first, my father. He just barely learned how to download music and burn CDs this year. My mom just needs to send emails and pay bills online. So for fathers day, I bought my dad a used show white iMac G3. I can't believe how fast it is. He thought it came from space, but was excited. He's not tech savvy in any way, but he is trying and is slowly learning. I'm trying to get it as close to what he's use to, and there is the problem. He knows what FireFox looks and feels like, but I cannot install it. I download the program, "install" it, but I can't load it up. I click on the icon and it bounces up and down in the dock and then fades away. Its like the feeling you get when your car is about to start and dies down. I have no idea what to do. I'm only 7+ months into Mac's, so I could be missing something simple...maybe? I've check the permissions on firefox and allowed everyone to read/write but nothing I can think of anything else. Also, I've been searching and searching for this one, but I have no idea how to word it and I'm coming up nothing. Since I can't run firefox, I'm teaching the old man to use safari. He could eventually learn it, but even I prefer firefox. That's another story for another time. Any ways, the problem with Safari on his G3, even after every possible update (I think), every layout on every page is totally off. When I click on Safari and the apple home page comes up, some icons are cut in half, the bottom bar with the list of links is towards the middle, and side bars are just messed up. Pages like craigslist come up with a harsh fully aligned left layout. Other pages have words stacked on other words so its impossible to make out whats going on. My mom was going crazy because she couldn't figure out how to log out of her bank account (kinda funny). I've tried Displays on the iMac, I've tried View on Safari, messing with text size, ect, nothing has helped me. I don't know what to do here either.
View 15 Replies View RelatedI have a 2007 imac which i want to restore/erase the hard drive so it's like its out the box. I have the orignial Install DVDs but when i put them in they won't run because i get the powerpc is no longer supported message. I upgraded to lion but no longer have the disk for it..Any Ideas how i can restore?
Info:
iMac, Mac OS X (10.7.4)
i have 10.2 install discs 1 & 2 can i use an ibook to be a slave and put the install cds in that? mainly, the guy's problem im trying to fix is that his daughter deleted the utilities folder from the iMac g3 running 10.2.8. i want to upgrade him to 10.4 of which i have the disc install DVD. what would be the easiest way to do this seeing the cd drive on the iMac G3 is busted, i have install discs 1 & 2 for 10.2 jaguar and the install dvd for 10.4 tiger? and his daughter erased the utilities folder on the iMac g3 with 10.2.8 on it. I can use his ibook with functional dvd-rom drive as a slave right?
View 1 Replies View RelatedSince I do Hd Video editing and the iMac does not have an external eSata port I am willing to replace my dvd super drive with a hard drive if possible?
View 2 Replies View Related
