PowerPC :: Ibook Not Working Fine / Unable To Find Boot Volume And Freezes Sometime
May 23, 2009
well where do i begin ?? basicly i purchased a ibook g4 14" 1.33ghz that had its harddrive upgraded by a apple service provider. About two weeks after this upgrade took place the harddrive started playing up and the machine would not see the boot volume on the drive when restarted or every now and then the machine would freeze after some time of use, a few hours maybe. i ran apple hardware test and it came back clean after zapping the pram and disk warrioring the drive it fixed this for a day then it started again oh well.
so i sent it back to the service provider who said yep its the hadrdrive goody !!! oh NO he calls back the next day and says the new harddrive is not reconized and that they tried a new ribbon cable WTF when i sent it in the machine saw the harddrive via target disk mode all the time it just didnt see the boot volume.
NOW his saying its the logicboard **** sake !!! so my question could this machines logicboard be fried when it was fine before i sent it in , i mean the ide controller was fine i checked it and now im faced with a brick !!!what do i do ????
View 24 Replies
ADVERTISEMENT
Nov 28, 2008
My beloved iBook 1.33 wont boot, has flashing? and freezes when I try to boot from original CD with a bunch of vertical lines. I ran the diagnostic DVD and it says Invalid memory access. I removed the external ram chip for computer and still get same error. I also zapped PRAM, reset NMVU (whatever it's called). I already have the iBooks case open and willing to try anything.
View 5 Replies
View Related
Aug 13, 2009
Up until recently, F1 - F5 have been Brightness and Volume controls, as they have been since I got the thing. I go to use the Volume, and it doesn't work. I then try the Brightness, and it doesn't work. F6 - F12 all work just fine, which leads me to believe that iBook had a brain fart.
My volume balance has always altered itself. Balancing itself out of one speaker left or right as it so chooses. I know it's smart, but now it's just screwing with me. Settings go and change on their own, dock icons have switched, but this one has stumped me. How do I get those hardware function keys back to doing what they're there to do?
Also, I tried it with an App called Rowmote, that lets you control your Mac from your iPhone, with Apple Remote-like control, and the volume won't change using that either. Another symptom is that sometimes it makes clicking sounds, as if it were changing slowly and glitchy (which it did click sometimes anyhow) when using the Volume slider in the menu bar.
No, the options in System Preferences is not checked to use them as FN. Any ideas?
View 14 Replies
View Related
Aug 13, 2010
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
View 19 Replies
View Related
Aug 3, 2006
Hello. I am looking to sell my old iBook (for parts) but first want to wipe it clean. Unfortunately, part of the reason I want to get rid of it is because the cd player doesn't work anymore. Therefore, I am unable to 'c' boot from the original OS X disk and erase the hard drive. Is there another way to wipe all personal info from my computer, leaving only the operating system?
View 2 Replies
View Related
Aug 7, 2008
My ibook has been working great and all of a sudden I have no display. It boots up fine, the eject button works, I can hear the volume if I turn it up or down. This is my second ibook and I really need this one to work! Its only 4 years old 800mhz,256,30GB. There are no apple repair places anywhere (other than the apple store) around here, so I'm not sure if there's something that I can do on my own?
View 4 Replies
View Related
Aug 11, 2009
basically my airport is not working under leopard, but works fine in boot camp xp.
I tried to delete the network history, keychain info, reboot the system, re-enter the password, no good.
now the airport has a self assigned IP address ... I restart to xp, it's fine, go back on os x, no internet i tho it's supposed to be the other way around.
yesterday it was fine on leopard.
View 6 Replies
View Related
Jun 19, 2012
My Mac Pro will not find it's boot volume. Each time the computer is started, the blinking folder with the question mark is the result. A working install of 10.7 does exist on the machine's primary hard drive. If I were to press the option key on boot, I can select the primary hard drive (after entering the password) and everything boots as normal. I have run TechToolPro on the volume with no detected errors, even after a volume rebuild. A Recovery HD partition is not on the boot volume. Should that matter?
I really really do not want to reinstall Mac OS X. I have hundreds of gigabytes of data in question. Any reinstall/reconfig would take days to complete.
Info:
Mac Pro, Mac OS X (10.7.4), 8GB RAM, 1TB HDD
View 4 Replies
View Related
Aug 8, 2006
I love my iBook, however, the low audio volume leaves me holding my iBook to my face to hear the audio (or using headphones). I have maxed the normal volume and the sound output volume under system preferences. I also increased the volume through the quicktime controls when I was watching the keynote last night. It wasn't loud enough to enjoy from more than 1 or 2 ft away.
Question: Is there anyway to increase the volume on my iBook other that the ways mentioned above? (I know the iBooks speakers are lousy and the sound depends on the source.)
I am not trying to rock out. I just want to hear Steve. . . . without having to buy external speakers.
View 1 Replies
View Related
Jun 19, 2010
Something seems to be wrong with my MobileMe syncing. I recently did a hard drive replacement in my MBP due to a failing hard drive. I did a complete mirror of my hard drive and everything is working fine except for MobileMe. I am able to sync all MobileMe items except for the Calender. When it gets to �alendar syncing a window pops up with the following:
You need to replace your Calendar information on MobileMe
If this computer has the most current information, click Replace. If the most current information is on another computer, cick Fix Later and replace your information on that computer.
Obviously my only two options to click are Fix Later and Replace.
The problem is while I was unable to use my computer I was using my iPhone mostly with the calendar which of course synced to my MobileMe account.
I don't want to choose Replace since this computer was not used for approximately 2 weeks so is not at all up to date.
I can choose Fix Later but I never get any other options.
I simply need to have this computer get the information from MobileMe and place it on this computer since both my iphone and MobileMe is up to date but I never get that option.
How do I do this (take info from MobileMe and put on this computer)?
Thank you for your help.
View 2 Replies
View Related
May 1, 2009
Certain websites I try to access are unable to display. They give me the "standard" cannot connect to the server error. [URL]. Other computers in the house operating on the same wireless connection can access these sites fine... so I think something is mis-configured on my machine somehow. I contacted my IP and they said everything is fine. My computer is a 24in. iMac 2.8GHz Intel Core Duo running Mac OS X 10.5.6
View 2 Replies
View Related
Jan 27, 2008
I have a G4 iBook - 1.07Ghz, 768Mb RAM, Panther - that keeps giving me the swirling beachball of death depending on the date setting on preferences. If I set the date to 2004 the machine runs fine, but if the date is set to today or (I'm not sure of the exact date) after 2007-ish the thing keeps freezing.
Also, after the freezing troubles I installed Ubuntu and it ran perfect with the correct post 2007 date.
View 3 Replies
View Related
Nov 12, 2010
I have tried google, but I'm now resorting to macrumors.
Basically the I updated to 10.6.5 and updated to the latest Java. The problem I now have is with some statistics software called SPSS, it can't render graphs anymore because of the java update.
I've been struggling trying to fix the problem and I can't get it to work.
If I revert back in time machine will it change the system files back so that my software will work again??
Would it be better to do a clean erase and restore from time machine, do I need to use my SL disk for this?
View 10 Replies
View Related
Oct 9, 2005
i think my mighty mouse (wireless) is starting to suffer the inevitable scroll ball problem, as i cant scroll down as well anymore..have any of you had any sucess getting a replacement or fixing it??
View 5 Replies
View Related
Feb 13, 2009
So I finally got around to getting a 1tb drive to hook up to my airport extreme to do TM backups. I have ~420gb to backup on my mbp's hard drive. To avoid an absurdly long backup, I did the initial backup via usb (took the better part of the day).
Just now I was excited because it finished - I hooked the drive up to the extreme, mounted the drive so that it would show up as an option in the TM pref pane for a backup disk, and thought I was good to go. However, when I tried to get TM to do a backup so I could see it work (by selecting Back Up Now from the menubar), it took a ridiculously long time "preparing" and I saw that it was trying to create a whole new TM backup on the drive based on my computer's network name. It even had the audacity to think that the previous backup file was ~2gb, which freaked me out because I thought it had deleted it. But sure enough when I canceled the new backup and hooked it up to my mbp again, the backup was the correct size.
View 10 Replies
View Related
Oct 5, 2009
This is an issue most of you are probably familiar with. The 360 scroll ball on my mighty mouse has become so lodged with dirt (I'm assuming) making it impossible to scroll down. Scrolling left, right, and up works okay at best. When I scroll in the working directions, it makes a smooth tracking sound (tick-tick-tick-tick), when I scroll down, this sound is absent and is replaced by a "shhh" sound, which is the beginning of the word I'm thinking of when I hear it.
I've tried the "dry cloth" (when has that ever 100% worked) with no avail, then I resorted to using a sewing needle to get around the ball (which caught a very small amount of dirt). The down-scroll still doesn't work (I mean, it doesn't work AT ALL, it's not functional) and I don't know what to do. I'm sure the mouse can handle more than just regular-consumer workload.
View 1 Replies
View Related
Dec 14, 2009
Can anyone help me with this mighty mouse problem I'm having? Everything on the mouse is working perfectly EXCEPT when I try to scroll upwards the darn thing just won't do it. It scrolls down, left and right with no problem at all but when I want to go back up a page it does nothing. It's very odd and I have no idea what is wrong.
View 1 Replies
View Related
May 4, 2009
I naively tried to install leopard OS on my 5-year old ibook G4 (with very little RAM). It makes a horrible clicking sound from the dvd drive and freezes on the screen that says its looking for OS 10.4(?) (which is not on the computer). When I reboot it immediately starts the install process, because the dvd is still stuck in the drive, and freezes over & over again.
All I want to do is remove the disc and go back to the original OS, so that I can add more RAM and update the OS properly. (The only motive for the update is so that I can have the same version of Garageband 2008 on both my desktop and laptop so I can work with the files interchangably.)
Is there a way to restart the computer that bypasses the install disc and dosen't default into the install porocess?
View 2 Replies
View Related
Feb 22, 2008
I have a small issue on my iBook (G4) that's been driving me a bit crazy lately. I noticed a few months ago that when I selected a song/video on iTunes to play, I would get uneven volume output on my two internal speakers. I tried restarting iTunes, restarting the computer, etc. to no avail. In addition, sometimes this problem would not arise for a few days, and then suddenly start up again.
I then dug up the program Audio MIDI Setup and saw that the sliders were uneven . Once I slid them back together, I thought I had solved my problem. Nope! It came back, and I even saw that if I opened up Audio MIDI Setup right after the computer turned on, the sliders would be skewed even before opening iTunes or Safari or some other program that used audio.
I've come accustomed to manually balancing the volume output, but the irregularity of this problem occurring frustrates me. Attached is a screenshot of Audio MIDI Setup with the issue--note the Audio Output sliders.
View 2 Replies
View Related
Dec 21, 2007
I'm experiencing some strange behavior in Front Row under 10.5.1 and I was wondering if it's "by-design": When browsing for photos via Front Row, after choosing an event - whenever an event contains some movie clips in it, the clips would show as a blank, black screens during the event slide show. Once the slide show skips to the next photo, everything continues as usual...
I'm finding it hard to believe that this is how it was meant to be. Can't it just show the movie-clip? (or at least skip it...?)
View 2 Replies
View Related
Aug 25, 2005
I recently developed a scrolling problem with my Mighty Mouse. It started to only vertical scroll in one direction. I reinstalled the software and it did not help. So, I called Apple tech support. While waiting on the line, I decided to press quite hard on the scroll button and try to scroll. That cured the problem, after that it only required the normal light touch to work properly. I do not know what was the cause of the problem, maybe dust(?), in any event it is working fine now.
View 24 Replies
View Related
Sep 17, 2009
My friend just got a 1.25GHz MDD but he says he is having problems with it. He says that when he starts it up, his mouse light (sensor) flickers and the keyboard does not work. The only way to fix this is to unplug and replug in the peripherals. He also tried on his Studio Display connected via ADC and the same thing happens. Could a PCI USB card help his problems or is there some way to fix the current USB ports?
View 1 Replies
View Related
Jun 11, 2007
I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.
View 6 Replies
View Related
Nov 30, 2007
recently my ibook keeps randomly locking up, it first started the other day when it got stuck on a blue screen at start-up eventually it came on, but kept locking up, no spinning beech ball just completely froze, i held down the power button to turn it off, i then had to wait at least ten minutes before trying to start up again, if i didn't it would get stuck on the blue screen, then something else weird happened, when i started up it came up with the mac set-up assistant similar to when you first upgrade, so i turned it off again and it went away, so i started up again this time i noticed that spotlight was indexing, despite it already doing that ages ago when i upgraded to leopard, so i thought this had something to do with it, because it kept freezing in the process, but today i turned it on, let it index and to my surprise it didn't lock up, so i went to play world of warcraft, and as soon as the login screen came up it locked up agai
View 1 Replies
View Related
Dec 19, 2008
I have had my mighty mouse for a couple months and it has worked great on my macbook. Just recently the middle button won't open up the dashboard and the two side buttons go through spaces instead of exposing all windows. In system proferences under mouse and spaces both are set for the middle button to open the dashboard and the side buttons to expose all windows but they don't do that. It could be an easy fix but I don't know what else to try?
View 7 Replies
View Related
Nov 14, 2009
I have a MAC OS X 10.4.11 IBook G4 1.1. It's acting up on me. Crashes often and freezes as well. The only CD I can find is the Mac OS X Tiger Install DVD. Is this the Hardware test cd as well?
If yes, how do I get the hardware test started. I tried the "restart while holding "C"" and "restart while holding the "option key""... Doesn't work... Don't see a hardware test option. If no, Can I download the application
View 2 Replies
View Related
Aug 10, 2008
i have an ibook g4, and was using it just fine the other night, then when i came back to it a few minutes later it had shut off completely. now when i boot up, the computer freezes at the spinning gear startup screen or at the blank blue screen immediately after the spinning gear. it will boot in single user mode, but it won't boot up with my os x install disc. does anyone know any unix i could try to use to get my mac up and running again, or has anyone had this same problem and knows a fix for it?
View 8 Replies
View Related
Nov 11, 2008
My iBook G4 (see sig below) has an intermittent problem. It usually sits on my desk, plugged into the power adaptor, always on. The only time I ever do a shutdown is when I'm taking it with me to the airport. Here's where the problem happens -- WHEN it happens. I start it up and one of two things happens:
1. I get the old question mark disk icon, or
2. I get a plain grey screen
Sometimes, if I do a manual force reboot (cmd-ctrl-power) several times in a row, it will finally boot correctly. The lovely grey Apple logo shows up, and all is well.Other times, when that fails, I boot from a DiskWarrior CD. Sometimes it can't see the internal HD. Other times it sees it, and when I run DW, it does find errors to fix. Yet other times, DW sees it, and finds NO errors.
When the iBook is working, the internal HD's SMART status shows as Good.So, whatup with this? Is the drive actually going bad (SMART status notwithstanding), or is it maybe the controller or some other logic board component? I could chuck the iBook and get a nice new MacBook, but this 2004 antique still suits my needs.
P.S. BTW, the internal HD backs up to an external FW drive daily, so there will be minimum heartache if/when the thing totally bites it.
View 5 Replies
View Related
Nov 22, 2006
I was playing some old freeware games for Mac OS 9 and was playing lemmings when my Clamshell iBook just turned off and now I get the Blinking folder with question mark. I made a live CD of ubuntu where it's talking to the harddrive but the iBook won't boot to OS X so i am trying to figure why.
View 10 Replies
View Related
Oct 8, 2007
My friend just got a 800 Mhz iBook G3 from someone. I think it's the April 2003 model. It has a CD-ROM drive so I think it's that one. The iBook has Mac OS X 10.4 Tiger on it. The problem is that in normal boot, it hangs right before the "Starting Mac OS X" screen with the bar. The mouse pointer just stays in the corner. The computer can boot into Safe Boot. He tried reinstalling the OS with Archive And Install keeping the same settings but it still does it. Apparently he says that he had to boot into the Mac OS X Install Disc in safe mode by holding shift. Starting the computer holding Option and selecting the Install Disc caused the installer caused it to hang in the same way. He is currently doing another Archive And Install with the keep settings box unchecked and has yet to do an Erase And Install.
View 3 Replies
View Related
