I have a G4 iBook - 1.07Ghz, 768Mb RAM, Panther - that keeps giving me the swirling beachball of death depending on the date setting on preferences. If I set the date to 2004 the machine runs fine, but if the date is set to today or (I'm not sure of the exact date) after 2007-ish the thing keeps freezing.
Also, after the freezing troubles I installed Ubuntu and it ran perfect with the correct post 2007 date.
My school has ~15 iBook G3's(600 MHZ, 128 MB RAM, OS X 10.2.8) that are suddenly unable to hold the date or time. They are plugged in constantly, batteries in, and are always on. I know that with the Pismos, there are PRAM batteries that you can replace, but if I read Apple's support pages right, there aren't any in the iBooks. How does this happen? How easy is the fix?
I am working on a hardware hack with an iBook G4 800MHz where I can only power the iBook with the AC Adapter--NOT using the battery. When the compy is turned off and turned back on, I am getting this huge error message on the display that my time and date are wrong.
I gather there is no battery on the MB that sustains the internal clock--the compy uses the powerbook battery to keep the clock up to date?
Is there any way to set the system software to bypass or ignore the time and date? This computer is not connected to the internet, and time and date are irrelevant to my application.
Any ideas ? when i switch my ibook on it says that the date is set to 2001 or earlier and so i need to change the settings. I can't physically access the settings
My beloved iBook 1.33 wont boot, has flashing? and freezes when I try to boot from original CD with a bunch of vertical lines. I ran the diagnostic DVD and it says Invalid memory access. I removed the external ram chip for computer and still get same error. I also zapped PRAM, reset NMVU (whatever it's called). I already have the iBooks case open and willing to try anything.
I naively tried to install leopard OS on my 5-year old ibook G4 (with very little RAM). It makes a horrible clicking sound from the dvd drive and freezes on the screen that says its looking for OS 10.4(?) (which is not on the computer). When I reboot it immediately starts the install process, because the dvd is still stuck in the drive, and freezes over & over again.
All I want to do is remove the disc and go back to the original OS, so that I can add more RAM and update the OS properly. (The only motive for the update is so that I can have the same version of Garageband 2008 on both my desktop and laptop so I can work with the files interchangably.)
Is there a way to restart the computer that bypasses the install disc and dosen't default into the install porocess?
recently my ibook keeps randomly locking up, it first started the other day when it got stuck on a blue screen at start-up eventually it came on, but kept locking up, no spinning beech ball just completely froze, i held down the power button to turn it off, i then had to wait at least ten minutes before trying to start up again, if i didn't it would get stuck on the blue screen, then something else weird happened, when i started up it came up with the mac set-up assistant similar to when you first upgrade, so i turned it off again and it went away, so i started up again this time i noticed that spotlight was indexing, despite it already doing that ages ago when i upgraded to leopard, so i thought this had something to do with it, because it kept freezing in the process, but today i turned it on, let it index and to my surprise it didn't lock up, so i went to play world of warcraft, and as soon as the login screen came up it locked up agai
i have an ibook g4, and was using it just fine the other night, then when i came back to it a few minutes later it had shut off completely. now when i boot up, the computer freezes at the spinning gear startup screen or at the blank blue screen immediately after the spinning gear. it will boot in single user mode, but it won't boot up with my os x install disc. does anyone know any unix i could try to use to get my mac up and running again, or has anyone had this same problem and knows a fix for it?
well where do i begin ?? basicly i purchased a ibook g4 14" 1.33ghz that had its harddrive upgraded by a apple service provider. About two weeks after this upgrade took place the harddrive started playing up and the machine would not see the boot volume on the drive when restarted or every now and then the machine would freeze after some time of use, a few hours maybe. i ran apple hardware test and it came back clean after zapping the pram and disk warrioring the drive it fixed this for a day then it started again oh well.
so i sent it back to the service provider who said yep its the hadrdrive goody !!! oh NO he calls back the next day and says the new harddrive is not reconized and that they tried a new ribbon cable WTF when i sent it in the machine saw the harddrive via target disk mode all the time it just didnt see the boot volume.
NOW his saying its the logicboard **** sake !!! so my question could this machines logicboard be fried when it was fine before i sent it in , i mean the ide controller was fine i checked it and now im faced with a brick !!!what do i do ????
I am on Tiger 10.4.11 on Mac Book Pro Intel duo. All updates except for Parallels installed. Have run permissions repairs and preferential treatment. Tried to delete preferences for system ... Every time I try to uncheck the box marked or open the Date and Time preferences, it freezes and have to force quit.
My date and time resets each time my mac sleeps or is reset or if I open date and time options. It keeps sending emails of my old reminders from 2008/2009 from ical and my to-do list emails me its reminders. This happens every time I open my comp or even just open date and time options. I also get the ical reminder notification that pops up freezes on my screen. Not sure how this happened, but can anyone help?
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
I sent in a question, but I thought I would also post a thread in case anyone else might have some helpful suggestions.
I have an iBook G4, Tiger edition 10.4.11, 1.07 GHz, 768 MB DDR SDRAM.
My system sporadically freezes. Whenever it is moved (i.e. resituated on my lap, or from my lap to the table). Or if I leave it unattended for a period of time (i.e. downloading something, and walk away, by the time I come back it's froze if I am not constantly DOING something). Or if I try to access 3 or 4 applications at a single time.
Sometimes the freeze is a complete system freeze where nothing works or moves. Sometimes everything but the mouse freezes and I can still move the black arrow around. Sometimes it freezes and the little beach ball just keeps spinning, but is still mobile.
Sometimes after it freezes it will not restart. Instead it goes to a screen where it is all white with black flashing horizontal lines.
Sometimes a screen will pop up and say simply "You need to restart your computer. Please hold down the power key."
The only thing that I've found that fixes the screen is to take out the battery for 5-10 seconds and then it restarts immediately and perfectly.
I've done my "google" research and found that the early G4's (which mine is) have issues with the logic board and my Mac showed similar symptom's. It also said the "clamp" method temporarily fixes the problem. I tried this and it did nothing but readjust the black flashing lines. It did not fix the problem.
I've tried completely reformatting my hard drive. Starting from scratch. I installed an additional 512 MB of RAM on top of the 256 built-in. I ran Disk Utility to verify and repair permissions. I installed SMART reporter, and it says that my hard drive is fine. I ran ClamXav before reformatting my drive and it found nothing. I can't run it now, it freezes before it's finished every time
I was working on my iBook G4 and it froze up on me. When I restart, it goes to the apple and spinning wheel then goes to a blue screen and sits there. If I restart it does the same thing. The only thing I have done for it to go to the login screen and not the blue screen is let it sit of a long time then try again. I have done a hardware test and everything passed. After much troubleshooting I figured I would erase the entire disk on the OS install and start over. I get about a quarter of the way through the OS install ( i have tried Leopard and after many freezes, reverted back to the original OS disk Panther) but I get the same thing everytime it just freezes. Usually everything freezes including the mouse pointer. My only option is to restart which gets me back to the blue screen. I have gone into the hard drive via firewire target disk mode and backed everything up. ANd everything seems fine in TDM. I also erased the disk through disk utility figuring if nothing is on the disk there should be nothing left to be causing this error. So i erased everything but still freezes up on the OS install.
I've been reading the other post and searching for ways to fix this. My ibook froze a couple of days ago, so I pressed the power button to do a hard turn off and then restarted it. It hasn't made through the blue screen since. It seems to load all way and then stops at the end, but stays on the blue screen. The mouse is not frozen though, I noticed that was a problem for some people. So I've already tried a lot of the suggestions I could find. I've tried resetting the PMU,Start your computer holding the ⌘ and S key on your keyboard. When the black screen turns up and the "writing" stops, you will see something like
I have an ibook g4. It freezes at the blue screen with the apply on it. The little circle goes around and around but nothing happens. I took it to an apple technician yesterday who told me the hard drive is toast so I should just throw it away. (Actually, he offered to take the keyboard.) When you do the fsck -fy it says that the hard drive was repaired sucessfully. Is it possible to have a hard drive that is bad and a message which says it has been repaired successfully? I don't mind having the hard drive replaced if that is what is wrong. I do not have any of the install discs any longer.
Right now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
I just bought a parts ibook from ebay, but I managed to fix it, except there was no hard drive. I currently have a 6 GB HD in it with OS X.3.9 on it, but I want tiger. I have the tiger family pack, so I have a license for it. It only has a CD-ROM drive, so I am wondering if I can buy a 40 GB HD, and clone the one from my G4 onto it.
SPECS ibook G3- 500 MHZ 192 MB RAM CD-ROM currently has 6 GB HD ibook G4- 1064 MHZ 1.25 GB RAM Combo drive 40 GB HD
My Powerbook G4 Titanium is running OSX Tiger and will not open the Date & Time preferences - instead it gives the error message 'System Preferences closed down unexpectedly' with an option to send info to Apple.
This is an issue because the date has reset to 1970 and when I start the mac the time is always 04:00. I tried leaving it connected to the wi-fi overnight to see if the time servers would do their thing, but no luck.
I have a MAC OS X 10.4.11 IBook G4 1.1. It's acting up on me. Crashes often and freezes as well. The only CD I can find is the Mac OS X Tiger Install DVD. Is this the Hardware test cd as well?
If yes, how do I get the hardware test started. I tried the "restart while holding "C"" and "restart while holding the "option key""... Doesn't work... Don't see a hardware test option. If no, Can I download the application
So, I'll spare you guys the details, haha, but I am stuck trying to decide between getting an iMac Intel or a MacBook Pro for my home use computer. What would be the advantages of one over the other? I just really love the fact that a MacBook Pro would be portable yet powerful. And yes, I have this iBook for portability to school and such, but if I want to do extensive work on the couch, I could bring a MBP vs. an iMac. What do you all think? Are too laptops redundant?
I have a folder where I place an ever growing collection of my favorite songs. Before I switched to Mac, on Windows, when I wanted to revisit songs I most recently added to the folder, I would sort the songs by the Date Modified and it would order the files I placed in the folder by date.
In OSX, however, there must be a slightly different meaning to "Date Modified," as it does not quite sort my songs by the order they were added. It gets some of it right, but there's plenty of files that are out of order--tune "x", which I know was placed in the folder a week ago is actually listed further down the list with songs placed in the folder months ago.
Is there a way to have OSX sort files in order of the date it was placed in a folder? Neither "Date Modified" nor "Date Created" works 100% as I thought it would. Or is the OSX definition of Date Modified/Created slightly different than Windows?
I've noticed recently that when in Finder, all folders/files have a Modified Date of somewhere in January 2009 or January 2008, regardless of when it was actually modified/created. My clock at the top left-hand corner says Oct 20 though. Any thoughts?
I've been having problems with my Power Mac G5 crashing. The first time it would crash at random, with the fans kicking into high gear the red LED coming on. Apple support had me do an archive an install, no help and then a clean install which didn't help either. I took it into the shop and they replaced the logic board, and tested it.I got the machine back today and after about 2 hours of usage it crashed again, but this time I got a weird screen that scrolled across the screen.I have attached a screenshot and video of the issue:[URL]