I have a PowerPC G4 (3.3) and need to max it out and make it faster, what do you guys recommend i do to it.I've updated all the software i could from the apple website (itunes, safari....etc.).
Hardware Overview:
Machine Model:Power Mac G4
CPU Type:PowerPC G4 (3.3)
Number Of CPUs:1
CPU Speed:1.25 GHz
L2 Cache (per CPU):256 KB
L3 Cache (per CPU):1 MB
Memory:1.25 GB
Bus Speed:167 MHz
Boot ROM Version:4.4.8f2
I've take home an unused, unloved Power Mac G4 FW800 from work and would love to hear any anyone may have to get it running @ its optimum without forking out for a new Processor. I wont be doing any gaming on it, plan using it for Media and Design like Final Cut Express4, Photoshop and Illustator and for music and movies.
Its has a Dual 1.25Ghz Processor, 167Mhz Bus, ive installed a new ATI 9600PRO Graphic Card and bumped the RAM up to its 2GB max and have an external 500GB 7200RPM Iomega FireWire HDD. I also got a Philips 19in Wide LCD 1440x900 for cheap.
I am new on Mac OS in the past I use Windows and there are a lot of Software to optimize Registry, Hard Drive, Defrag Hard Drive etc.
What I must use on Mac?
Well i just got this macbook yesterday and its brand new out of the shop etc.
im not getting anywhere near the advertised up to 10 hours battery life. i was sitting on mac rumors and had 2 other tabs open in safari and was downloading a small file only a few hundred kb and its only saying that i've got 1 and a half hours battery life.
is there any program that i can run to optimise the battery or something?
I have a Mini (mid July 2010) that has worked flawlessly, yet I decided to install 8gigs of ram. At times I can have lots of things going on and with the original 4 gigs it seemed to bog down. Thinking more ram is the answer, of which it's apparently not, the Mini still can bog down even with the 8 gigs.
When checking Utilities and system memory it always has at least 3.5 gigs in a FREE status. No matter if I open almost everything. The system does recognize all 8 gigs it just does not use it all.
Is there some settings I need to tweak? All updates are installed. I'm not sure what to do to get the Mini to utilize all of its available ram. Or am I applying PC logic here?
Mac Mini mid July 2010 Intel Core 2 Duo 2.4
8 gigs of ram
Lion 10.7.4
Xfinity Extreme
DOCIS 3 modem
Airport Extreme
Info:
Mac mini (Mid 2010), Mac OS X (10.7.3), Awesome MACHINE!
my computer is saying that the startup disk is full but i already put my files on an external hard-drive and deleted them...
is there a way to defrag or optimize the computer?
I'm working with large video projects using FCPX and want to optimize the performance and reliability of my Mac Pro.
I'm told that the system files should be separate to my working files i.e. on a separate hard drive.
I have two internal hard drives so can I move the User Folder onto the 2nd hard drive or does the User Folder have to live on the same hard drive as the system files? Do I need to just move the video files to the 2nd HD? I also do 3D animation and would like those files to live on the 2nd HD.
Info:
Mac Pro, Mac OS X (10.6.8), Final Cut Pro X, C4D, CS5
so since my late 2010 Macbook Pro died I just got a new one this weekend. I was wondering what the best way to optimize the battery life on it would be as I'm noticing the battery life seems shorter on it than the new one. Is it true that if you use your Macbook more often on the AC charger than just on the battery itself it will make the battery life better in the long run?
View 7 Replies View RelatedWill the following optimize Mac Pro performance with programmes like Premier Pro, or will processing time be impeded? -- I've placed Snow Leopard on a separate hard drive from all Adobe software, and have placed file storage on a separate hard drive from both of those.
Info:
Mac Pro, Mac OS X (10.6.8)
how can I optimize performance on a macbook pro?
Info:
MacBook Pro (15-inch Mid 2010), OS X Mavericks (10.9.3)
Does anyone have how to claim more space on the MBA without having to do a full reinstall? Also anyone using bootcamp + vista recommend a partition size?
View 1 Replies View RelatedNot really, but when I play runescape on the MAcbook Pro 13" 2.26GHz, the temps go up to 75C. This is too hot, so is there a way to optimize Java?
View 14 Replies View RelatedThe building already has a wireless network in place, which is in place solely for those renting out the extra space, like her. However, since the offices that she is renting are so far back in the corner, her signal is less than perfect, and nonexistent in two of the rooms. I offered to bring in my Airport Express (previously purchased just to stream music) to connect to the network and extend the range, thus offering them complete coverage, but a little reading on the subject tells me that this will effectively cut their transmission speed by roughly half. Is there a way to optimize the Airport Express in a way to get the best signal to her offices without such a harsh penalty of loss of speed? I know this sounds impossible, but I figured if anyone knew a way to do it it would be you guys. I'm down to try anything, whether its software based or something as extreme as wrapping tinfoil around the Express. One thing I can't do is spend money to amend this problem, so I can't purchase a new Express, install a new network, etc. The Facts:
1. Older Airport Express (b/g, not n)
2. Router in the office is (I believe) a fairly newish Airport Extreme (with n)
3. The computers in the offices are the last model Powerbook G4 (g), a late 2008 Macbook (n), and a couple of year old Dell (probably g).
4. No active wired connection through the walls.
I recently upgraded to Lion OS X v 10.7.3, and i like iMail 5.2 when I work from my office or home.BUT, when I am working in the field I often have access to only glacially slow internet via an internet modem, and iMail takes FOREVER to download my messages. Way longer than my pre Lion version of iMail.Is there a way to optimize iMail 5.2 in order to optimize for slow internet connections? For instance, to partially retrieve large messages? Or to somehow deactivate all the synchronizing and other Activity that goes on in the background?
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
I am using Final Cut Pro and I want to use the waveform tool to optimise the saturation of my videos (2 feeds from different camera angles that are not balanced yet).
The Histogram works fine, but the vectorscope and the waveform view just display a bunch of junk. It does not look anything like what I see in the instruction manual. I attach a screenshot so you can see what I currently see.
Info:
iMac, OS X Mavericks (10.9.4), OSX Yosemite 10.10
I have a Dual 1.8 GHz PowerPC G5 with 2.5 GB of RAM. My fan starts revving really loud when I am using multiple apps (Adobe CS2, Firefox, iTunes) and while watching a video tutorial or AVI movie (both saved on my desktop). It also happens when I am just watching a AVI movie with no other apps open.
I just added one GB of RAM yesterday thinking maybe this will solve the problem since I am running multiple apps. This did not resolve it. So I searched the messageboard for threads on fan issues similar to mine. I read it may be caused by the tempature in my room. I keep the tower on my floor on top of 2 pieces of wood about a 1/2 inch thick. I live in a small brick studio apartment so the tempature is usaully between 60 to 70 degrees.
I looked into smcfancontrol but it looks like its for laptops only.I also do not have a utilities program for my computer yet. I was wondering what was the best program out there to clean up/tune-up my hard drive so its running at maxium speed.Has anyone had experince with this issue and have any answers? I am concerned this may be very detrimental to my computer in the long run.
I'd like to buy a LaCinema Classic Multimedia Player 500GB for my G4 400MHz (sawtooth).
[URL]In LaCie website says that a system requirement for LaCinema is a 500MHz processor or greater...
Do you believe that it will work in my 400Mhz PowerPC?
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
I've heard that G5s (especially dual-core/processor) really fly with 4 Gb RAM. Does anyone have one with this much RAM? If so, is it really worth the upgrade? I have dual-core G5 with 3.5 Gb RAM. It's great, but I do think it feels a bit choked at times. I would like to give it another Gig.
View 24 Replies View RelatedI run a Mac G5 PowerPC, OS X 10.4.11.
I see here that it says it's compatible with the 4.3 version of Vuse (PowerPC and OS version), but on their website, is says "for Intel". I would really like to know what is right here. Does it also support PowerPC or not? . What version of Vuse should I use, with satisfaction, if any? My computer has been acting up and I am trying to figure out why. That might be a cause. I would be very grateful for such information, to keep my mac in good shape and also enjoy Vuse.
And if Vuse isn't the answer for my mac, what would be ?
Powerbook G4 running on Mac OS X 10.4 but iTunes 10 suitable for new iPods and as PowerBook G4 quite slow running on Leopard so I am using on Mac OS X 10.4.
View 4 Replies View RelatedI have a few questions about upgrading my mac in order to use the new iPod touch 4th gen (requires 10.5 or later).
First, here's what I'm working with:
I have a PPC G4, dual processor 1.25 GHZ, 80GB HD, 768mb RAM, running Tiger 10.4.11. I use CS2 for freelance graphic design (and very occasionally Quark 4 on OS 9). I have 2 external hard drives backing up my system, storing personal files, photos, music, etc. Yes, I've got an oldie, but it's been cranking out loyally over the years with tune ups and TLC, and I need it to live on a while longer.
1. Can I upgrade to Leopard 10.5 (not snow leopard) and still use my CS2 programs? From what little information I've been able to find, the answer is most likely yes, but with quirks and decreased speed... which I can deal with. I simply cannot afford a new mac (nor the software upgrades required once that happens), so I need to work with what I've got.
If the answer is yes, then...
2) are there any other updates in between 10.4.11 and 10.5 that I will have to purchase before upgrading to 10.5?
3) Also, since I will have to upgrade to a minimum 1GB RAM, can anyone please suggest a good site to buy it from? There seems to be a million options out there. I know that I should really have more RAM anyhow with what software I am using.
I have a power mac g5 its a few years old and I'm having trouble installing OS 10.5 leopard. When I turn on the computer i get a blinking ? folder that alternates showing a ? and a mac face, with a gray background. I tried putting in the start up disk (? folder doesn't appear with the start up disk) and it guides me through the installation steps, but it doesn't display a location to install the OS on. I also tried putting an external HD in and this does not appear as well. So, I went to disk utility and tried the figure out the problem. In disk utility, the internal hard drive is there, but not the external HD. I also tried switching Hard drive ports from a to b and this made no difference.
View 11 Replies View RelatedDoes anyone have any experience with putting new hard drives in a 1.33ghz iBook 12" and in a 12" PB 1.5ghz -- that both have the sensor motion thing on the hard drives?
Is this motion sensor a physical part on the hard drive or something within the connection itself?
I also want to put a superdrive in the iBook 1.33ghz.
If anyone has any tips or advice, would be welcomed... as I believe the iFixit site's photos are for earlier revision machines.
I just put 2 sticks of 512mb in my g5 with these specs pc3200r-30330, the machine doesn't recognize them. I notice that the existing ram got this on the label pc3200u-30330. Pease someone tell me the difference between these 2.
View 3 Replies View RelatedMy G5 power mac has a standard CD burner in it that came with it when I got it - its given up the ghost. So I am going to replace it with a DVD Burner. Would I be right in thinking I can throw any DVD Burner in there? If i get the latest Pioneer Tray loading burner, that would slot right in there no problems right?
View 5 Replies View RelatedI have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
yesterday evening we had a power outage at my house, My G5 power mac was in sleep mode when the power went out. When the power came back on my mac came back on as if it were sleeping. The LED light in the front will stay on but the comp is non responsive. I 've tried holding the power button down for longer than 2 mins and nothing, I've tried unplugging everycord from the power mac and leaving it unplugged all night then this morning plugging everything back in and it still is non responsive, with the LED light still on. I am not hearing any nosie's coming from the power mac. I read on the apple website that it could be the PMU or SMU But I purchased the power mac late 2004 and as from what I read the only way to reset the PMU is to turn off the mac then unplug the mac and leave it unplugged for 2 mins then plugging it back in, If that were the case then leaving it unglugged all night should have reset it. I'm not sure yet as to if the power mac G5 has the SMU reset button or not because I'm at work.
View 4 Replies View RelatedCan you burn disks at 16X on a G4. I have a MDD and I'm not sure how fast the optical drive bus is but I could swear its an ATA-3 bus, which I think is either 16MBps or 33MBps. Not quite sure. Does anyone have one and can vauch the full 16 speed while burning.
View 17 Replies View RelatedIs the ram on the e-mac upgradeable? I would like to put more ram into my mom's e-mac, I think 128MB is a bit low...
Also, what is a good price for ram? (probably two 512s)
