PowerPC :: Is The Ram On The E-mac Upgradeable?
Feb 12, 2007Is the ram on the e-mac upgradeable? I would like to put more ram into my mom's e-mac, I think 128MB is a bit low...
Also, what is a good price for ram? (probably two 512s)
Is the ram on the e-mac upgradeable? I would like to put more ram into my mom's e-mac, I think 128MB is a bit low...
Also, what is a good price for ram? (probably two 512s)
Before I pay the extra $300 to go from 128 to 256gb can anyone tell me if the drive is upgradeable? I'm probably going to use it for 4-5 years so if it is I'll just get the cheaper one and wait for the prices to come down, but if its not I'll go with the 256.
View 24 Replies View RelatedIs the ram going to be self upgradeable? I hope so
View 2 Replies View RelatedI just wondered if any one really knows if the iMac GPU is upgradeable? I heard about the CPU being socketed but details about the GPU are sketchy. If it's a mobile GPU, it's normally soldered on or built-in to the logic board.
View 12 Replies View RelatedIf I purchase an i5 or i7 iMac in a years time could the processor be swapped for a faster i5 or i7.
I know the iMac take part looks hard but it can be done so can the processor be popped out and replaced?
Is the mac pro fully upgradeable like a desktop pc?
View 3 Replies View Relatedeverything's in iTunes Plus now and of the 400+ DRM'd songs I had before, I still have 10 left. After the initial wave of iTunes plus upgrades, I was down to 40 or so. More and more came in until now I'm down to ten. Am I going to be able to upgrade these soon? I see the songs are available for purchase in iTunes Plus...
View 24 Replies View RelatedIvy Bridge, just like Sandy Bridge, supports RAM upgrades all the way to 32 GB. However, Apple seems to be limiting this to 16 GB. Websites like Crucial will sell you a 32GB RAM package for the same price as Apple offers you a 16GB ram upgrade. Can anyone enlighten me on this? Will the Retina MacBook Pro be able to upgrade the RAM separately say after a year or so of owning it? I have heard that the RAM is soldered to the board, but there are also indications that there is an upgrade tab on the top right-hand corner of the RAM card location.
View 9 Replies View RelatedOn ifixit pages seems that the samsung hs12yha (120gb) could be put inside a mba first gen. I had asked ifixit support confirmation, and they told me it will work, but from the specs page the block size il 4k and not 512.. (the reason why the 5th gen ipod hd does not work in the air).
View 7 Replies View RelatedI have a Dual 1.8 GHz PowerPC G5 with 2.5 GB of RAM. My fan starts revving really loud when I am using multiple apps (Adobe CS2, Firefox, iTunes) and while watching a video tutorial or AVI movie (both saved on my desktop). It also happens when I am just watching a AVI movie with no other apps open.
I just added one GB of RAM yesterday thinking maybe this will solve the problem since I am running multiple apps. This did not resolve it. So I searched the messageboard for threads on fan issues similar to mine. I read it may be caused by the tempature in my room. I keep the tower on my floor on top of 2 pieces of wood about a 1/2 inch thick. I live in a small brick studio apartment so the tempature is usaully between 60 to 70 degrees.
I looked into smcfancontrol but it looks like its for laptops only.I also do not have a utilities program for my computer yet. I was wondering what was the best program out there to clean up/tune-up my hard drive so its running at maxium speed.Has anyone had experince with this issue and have any answers? I am concerned this may be very detrimental to my computer in the long run.
I'd like to buy a LaCinema Classic Multimedia Player 500GB for my G4 400MHz (sawtooth).
[URL]In LaCie website says that a system requirement for LaCinema is a 500MHz processor or greater...
Do you believe that it will work in my 400Mhz PowerPC?
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
I've heard that G5s (especially dual-core/processor) really fly with 4 Gb RAM. Does anyone have one with this much RAM? If so, is it really worth the upgrade? I have dual-core G5 with 3.5 Gb RAM. It's great, but I do think it feels a bit choked at times. I would like to give it another Gig.
View 24 Replies View RelatedI run a Mac G5 PowerPC, OS X 10.4.11.
I see here that it says it's compatible with the 4.3 version of Vuse (PowerPC and OS version), but on their website, is says "for Intel". I would really like to know what is right here. Does it also support PowerPC or not? . What version of Vuse should I use, with satisfaction, if any? My computer has been acting up and I am trying to figure out why. That might be a cause. I would be very grateful for such information, to keep my mac in good shape and also enjoy Vuse.
And if Vuse isn't the answer for my mac, what would be ?
Powerbook G4 running on Mac OS X 10.4 but iTunes 10 suitable for new iPods and as PowerBook G4 quite slow running on Leopard so I am using on Mac OS X 10.4.
View 4 Replies View RelatedI have a few questions about upgrading my mac in order to use the new iPod touch 4th gen (requires 10.5 or later).
First, here's what I'm working with:
I have a PPC G4, dual processor 1.25 GHZ, 80GB HD, 768mb RAM, running Tiger 10.4.11. I use CS2 for freelance graphic design (and very occasionally Quark 4 on OS 9). I have 2 external hard drives backing up my system, storing personal files, photos, music, etc. Yes, I've got an oldie, but it's been cranking out loyally over the years with tune ups and TLC, and I need it to live on a while longer.
1. Can I upgrade to Leopard 10.5 (not snow leopard) and still use my CS2 programs? From what little information I've been able to find, the answer is most likely yes, but with quirks and decreased speed... which I can deal with. I simply cannot afford a new mac (nor the software upgrades required once that happens), so I need to work with what I've got.
If the answer is yes, then...
2) are there any other updates in between 10.4.11 and 10.5 that I will have to purchase before upgrading to 10.5?
3) Also, since I will have to upgrade to a minimum 1GB RAM, can anyone please suggest a good site to buy it from? There seems to be a million options out there. I know that I should really have more RAM anyhow with what software I am using.
I have a power mac g5 its a few years old and I'm having trouble installing OS 10.5 leopard. When I turn on the computer i get a blinking ? folder that alternates showing a ? and a mac face, with a gray background. I tried putting in the start up disk (? folder doesn't appear with the start up disk) and it guides me through the installation steps, but it doesn't display a location to install the OS on. I also tried putting an external HD in and this does not appear as well. So, I went to disk utility and tried the figure out the problem. In disk utility, the internal hard drive is there, but not the external HD. I also tried switching Hard drive ports from a to b and this made no difference.
View 11 Replies View RelatedDoes anyone have any experience with putting new hard drives in a 1.33ghz iBook 12" and in a 12" PB 1.5ghz -- that both have the sensor motion thing on the hard drives?
Is this motion sensor a physical part on the hard drive or something within the connection itself?
I also want to put a superdrive in the iBook 1.33ghz.
If anyone has any tips or advice, would be welcomed... as I believe the iFixit site's photos are for earlier revision machines.
I just put 2 sticks of 512mb in my g5 with these specs pc3200r-30330, the machine doesn't recognize them. I notice that the existing ram got this on the label pc3200u-30330. Pease someone tell me the difference between these 2.
View 3 Replies View RelatedMy G5 power mac has a standard CD burner in it that came with it when I got it - its given up the ghost. So I am going to replace it with a DVD Burner. Would I be right in thinking I can throw any DVD Burner in there? If i get the latest Pioneer Tray loading burner, that would slot right in there no problems right?
View 5 Replies View RelatedI have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
yesterday evening we had a power outage at my house, My G5 power mac was in sleep mode when the power went out. When the power came back on my mac came back on as if it were sleeping. The LED light in the front will stay on but the comp is non responsive. I 've tried holding the power button down for longer than 2 mins and nothing, I've tried unplugging everycord from the power mac and leaving it unplugged all night then this morning plugging everything back in and it still is non responsive, with the LED light still on. I am not hearing any nosie's coming from the power mac. I read on the apple website that it could be the PMU or SMU But I purchased the power mac late 2004 and as from what I read the only way to reset the PMU is to turn off the mac then unplug the mac and leave it unplugged for 2 mins then plugging it back in, If that were the case then leaving it unglugged all night should have reset it. I'm not sure yet as to if the power mac G5 has the SMU reset button or not because I'm at work.
View 4 Replies View RelatedCan you burn disks at 16X on a G4. I have a MDD and I'm not sure how fast the optical drive bus is but I could swear its an ATA-3 bus, which I think is either 16MBps or 33MBps. Not quite sure. Does anyone have one and can vauch the full 16 speed while burning.
View 17 Replies View RelatedI own a PowerBook G4 15-inch, been enjoying it for a long while now, having thoughts of upgrading it. Performance Question, Is the current Black MacBook (when the top of the range Intel processor is installed, and when maxxed out with RAM) faster in overall performance than my now aged PowerBook G4 15-inch? I saw a bloke take out his MacBook at a cafe recently and I was blown away by its compact size (weight is an issue and I'm prepared to compromise large screen size for smaller resolutions and less weight). Schlepping my Powerbook around in my large and well protected shoulder bag is quite literally giving me a pain in the neck. Software Question: Will I be able to run Photoshop CS2 and CS3 and Final Cut Express on the MacBook without wishing I'd upgraded to the 17-inch MacBook Pro - weight issues and compact form aside - instead ? currently I uninstalled CS1 from my Powerbook G4 800Mhz 2GB Ram because its performance sucked soo much, I ran back to Photoshop 7 and ImageReady 7.
View 3 Replies View RelatedSo I got a great deal on a G4 powermac 733 mhz dig audio a few years back and it has served me well, but i bought it with one known flaw: after you start up, eventually It locks up and you get the screen that says you need to restart your computer. After I restart, I have never had it freeze, so I simply restart everytime and it works great. I have done a clean install of osx but that didn't solve the problem. Wierd a? I'd love to get it fixed if i could.
View 10 Replies View RelatedI have just come across a Power Mac B&W with a 300MHZ processor. Someone gave me a G4 400MHZ CPU. I was wondering if I can put the g4 in the B&W
View 15 Replies View RelatedI'd like to try running Ubuntu (6.06) on my G3 400 IMac. Is there a tutorial on how to do this? At least how do I get to boot mode? I'm running OSX.
View 11 Replies View RelatedIs there any way I can overclock my b&w g3 350mhz?
View 8 Replies View RelatedI need more ram for my eMac 1ghz. It has 512mb and its a little slow during some things. Like IMovie. What type of ram do I need?
View 3 Replies View RelatedSo is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?