PowerPC :: Cannot Install OS 10.5 On Mac G5
Jan 6, 2011
I have a power mac g5 its a few years old and I'm having trouble installing OS 10.5 leopard. When I turn on the computer i get a blinking ? folder that alternates showing a ? and a mac face, with a gray background. I tried putting in the start up disk (? folder doesn't appear with the start up disk) and it guides me through the installation steps, but it doesn't display a location to install the OS on. I also tried putting an external HD in and this does not appear as well. So, I went to disk utility and tried the figure out the problem. In disk utility, the internal hard drive is there, but not the external HD. I also tried switching Hard drive ports from a to b and this made no difference.
View 11 Replies
ADVERTISEMENT
Aug 19, 2008
I just replaced the HD in an iBook G3 I have laying around with a toshiba 40gb. The install went fine and I formatted it in disk utility using mac os x extended (journaled). I ran it for errors and it checked out fine. I also ran the apple hardware test CD and everything checked out there too. The problem is I am getting a kernal panic no matter what I do. I started off installing 10.3 and the first disc installs fine, but then when it restarts it gets an instant kernal panic. I tried 10.4 with the same results. Then I tried the 10.2 discs that the iBook came with and it would get the very last step of the install on the 1st disc and would not go any farther. It said "one minute remaining" for over an hour.
I have taken a picture of the error log that shows up and you can see here: The top line got cut off but it says "panic(cpu 0): Unable to find driver for this platform: "PowerBook4,3" Like I said, everything checks out hardware wise and i have tried three different versions of OS X.
View 1 Replies
View Related
Nov 30, 2006
Anyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
View 3 Replies
View Related
May 23, 2007
I'm trying to reinstall Mac OS 9 for my friend on her iBook. When I boot from CD and go to install the OS, I get an error message reading:"Sorry, a system error occurred. bus errorTo temporarily turn off extensions, restart and hold down the shift key."
View 14 Replies
View Related
Jul 31, 2009
I'm trying to install a new copy of 10.5.6 onto my old G51.8SP but it wont work. I've tried to install on to both hard drives (1x500GB 1X1TB). The install get to about 11 mins from finishing and the comes up "the source media you are installing from is damaged". I know there is nothing wrong with the disc because I've installed from it on to my MacBook Pro to check...
View 6 Replies
View Related
Dec 28, 2010
does this kind of installation require some trick to be done?
View 19 Replies
View Related
Jun 14, 2007
I have just bought a new macbook pro and have a couple of questions which i would really appreciate some help with.
1.As i have limited tech ability i assume its best to just use the mac migrant assistant and connect the 2 macs and let the machine do it for me? Is that ok to do.
2. I am going to install parallels and Xp asi have some programmes that runs best under Xp.Do i install paralllels/xp before i do my mac transfer?
View 10 Replies
View Related
Jan 26, 2008
Ive purchased a used emac from a friend. 800Mhz, 256MB, 60GB HD, SuperDrive. Nice little machine for the kids. It has OSX 10.2 (Jaguar). I would like to upgrade it to Tiger. (wont support Leopard). My plan was to take my iBook license of Tiger, install it on the eMac, and then purchase Leopard license for my iBook. Would like to know if this is legit.
To see if this was viable, I tried to install Tiger on the eMac with the install DVD that came with my iBook. It starts up the install process, and the says that it cannot be installed on this machine.
Im not trying to circumvent anything. If possible to buy leopard for iBook and use it�s existing license on eMac that would be great.
View 3 Replies
View Related
Feb 26, 2009
I have a g4 quicksilver and I bought a 1TB sata hard drive to put in it. I also bought a pci card to connect the sata harddrive. I disconnected my other hard drive and put in the OS X disc to load the operating system, but when I get to the screen to choose which disc to install it on, my hard drive doesn't appear.
View 4 Replies
View Related
Mar 10, 2009
I just obtained a PowerPC G4 Tower, but there was no hard drive in it. Because of this, I put in an older 20 gb hard drive I had just laying around. It is from an old Windows PC I had, but I don't know if thats a problem or not. Anyways, when I try to boot from the Tiger disc, nothing happens. I have tried holding down C when I turn the mac on, but that doesn't help at all. I just always get the mac icon with a question mark in the middle of the screen. I am just wondering, is this anything to do with the PC hard drive I put in the mac? Or is there something else that I am doing wrong? I just want Tiger to be installed on the computer.
View 13 Replies
View Related
Mar 28, 2009
I have the Power Mac G4 533Mhz( 768 Ram / DVD-RW/ HDD40G/Display 32Mb). i want to install Mac OS X 10.5 Leopard.Have how to install Mac OS X 10.5 Leopard.
View 9 Replies
View Related
Jun 3, 2009
I bought a new 320gb HD to put in my PB G4 "ti" and a new external case to drop the old 60mb HD into when all is said and done.
What would happen if I put the new 320mb HD into the external case, connected it to the PB then dragged and dropped the old 60mb HD onto the 320mb HD to copy it.
Then swapped out the drives. Would the PB start up from the new 320mb HD?
I know that there are other ways of doing this, and I've tried a few, but having problems with the normal and conventional ways!
My OS 10.4 install disk is damaged. And for some reason SuperDuper hangs up in cloning the 60 HD to the 320 HD.
View 3 Replies
View Related
Jul 9, 2010
I have an original Tiger 10.4 install disk for a G-5 computer. When I boot up the computer with the install disk everything is fine. However when I run Disk Utility the only option I have for formatting the partitions is MS-DOS or free space. No Mac OS X formats are offered. If I run a 10.5 Install disk I am offered the options in Disk Utility to use Mac OS X HDD formatting. Any one have any idea what I need to do to get DU in Tiger to format the HDD in Mac OS X format? BTW, the HDD's in the unit are pre-formatted in Windows NTFS if that makes a difference. I just want to make sure Tiger supports Mac OS X format before doing anything else.
View 3 Replies
View Related
Sep 1, 2010
Does anyone know if its possible to install a video card with more than 256mb of RAM in a 2.7 dual G5? (8xAGP and PCI-e) Iv'e read lots about flashing ROM on cards but they all seem to be 256 - is there some limitation on flashing bigger/newer cards?
View 4 Replies
View Related
Jul 21, 2006
I have an old iMac Rev A (or B?) and it is constantly freezing. It freezes in OS 8, 9, and 10.3.. but most frustrating is that it also freezes while trying to install an OS. So right now it does not have an OS installed because of that. It will not boot up to my OS 9.1 disc.. but it will boot up to it's original 8.5 disc and a 10.3 disc.. However it always freezes near the beginning of the install process (often before it even writes to the HDD). I tried taking out the old RAM and leaving it with just the one (new) 256MB chip and that didn't work.
It was freezing before with only the old RAM so. I guess it's not the RAM. I have an identical iMac that doesn't choke on anything (never freezes) and it only has 96MB of RAM. I don't know what else I can do. I'm trying to use XPostFacto to put 10.4 on this thing (it's possible, I want to try it out at least) but it won't get through the first OS install and if it does, it won't get through the second (10.4). Even more frustrating is that I don't have any diagnostic software such as the Apple Hardware Test because the original iMac didn't come with any.
View 4 Replies
View Related
Jul 22, 2006
I bought 25 clamshell 466mhz graphite IBooks and whenever I put the HD in and put a disc in the drive to try to install an OS nothing happens, so I pressed the option key and this blue screen with a lock on one side and an arrow on the other, with a space to write in, in the middle. Now what I need to know is what should I do? I can put these things together like no one else but when it comes to software I'm lost. I'm going to try to attach the picture of what the screen looks like but I'm not too good at that either. But if someone can get these things up and running I'll give you a complete (no power cord) graphit clamshell for free.
View 9 Replies
View Related
Sep 23, 2006
I've got GSA-H20L LG lightscribe drive but the only problem is that the lightscribe drivers I got from versiontracker have to no avail helped me, I also tried disclabel.
Is there anyway via drivers/program to get lightscribe to work on this sawtooth?
View 2 Replies
View Related
Nov 7, 2006
trying to install Tiger on a 350mhz Sawtooth - problem is the computer won't read the dvd/cdrw drive (it did fine before I formatted the HD). I try holding C, it does nothing, tried reseting PRAM, nothing.
View 4 Replies
View Related
Mar 4, 2007
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
View 14 Replies
View Related
May 18, 2007
I have a 500mhz iMac G3. I just got it so it has a fresh install of 10.3.9, but when I try to put it to sleep the screen goes off, and then comes back on immediately.
View 11 Replies
View Related
Dec 14, 2007
FYI I have a powermac G4 dual proccessor with mirror drive doors. im running mac os x 10.4. I am wondering if anyone has installed linux on a similar machine, I would like to know more before I try it. what version is best (ubuntu I heard is good?)? Must you reformat a drive or can you install in on a new internal drive? any information really.
View 24 Replies
View Related
Dec 17, 2007
I've bought a iBook from eBay for my mum and grabbed a copy of Leopard, but every time I try and install it I get the following message:"Install Failed - The installer could not validate the contents of the 'BaseSystem' package. Contact the software manufacturer for assistance."I know the disc itself is fine as I previously used it to install Leopard on my Macbook. I've also just bought a brand new 1Gb stick of memory from Crucial as I read in a few places that "this message is due to faulty RAM in 99.9% of cases".
View 23 Replies
View Related
Dec 21, 2007
I have an iMac G3 DV Special edition which I bought off of craigslist with 400MHz, 384MB of Ram and a 13GB hard drive. It came with Mac OS X 10.1.5 and I'd like to upgrade it to Tiger. I have the install DVD and when I insert the disc, the iMac sees it and asks me to restart the machine so it can install but when I click ok and it restarts, nothing happens. It just boots back into Mac OS X. I've tried holding down the C key and setting it to boot the disk in the System Preferences area but nothing.
View 24 Replies
View Related
Feb 20, 2008
I have an old PowerBook G4/TiBook 1Ghz and want to erase everything on the drive to start over with a newer operating system (it is currently running on 10.3.9). What is latest OS that can run on this old baby and how do I erase everything and start from scratch?
Here's the Hardware Overview:
Machine Model:PowerBook G4 15"
CPU Type:PowerPC G4 (3.3)
Number Of CPUs:1
CPU Speed:1 GHz
L2 Cache (per CPU):256 KB
L3 Cache (per CPU):1 MB
Memory:512 MB
Bus Speed:133 MHz
Boot ROM Version:4.5.3f2
View 1 Replies
View Related
Mar 12, 2008
I've got an aging powerpc iBookG4 that came with OSX Panther (10.3)... time's taken it's toll on the old thing and it needs a refresh. Problem is I can't find the install discs, would I be able to use the install discs that came with my intel MacBook? I think buying a copy of Leopard would be too much for it.
View 6 Replies
View Related
Jul 4, 2008
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
View 3 Replies
View Related
Aug 19, 2008
I have a 12" powerbook that is running 10.2 and want to upgrade it to Tiger. The problem is that the DVD drive is broken so I can't pop in my copy and install. Is there any way for me to install it using a USB external hard drive?
View 4 Replies
View Related
Sep 19, 2008
I'm looking for a very easy to install Linux on my old iBook G4 and I would like it to support my Airport card without having to do much configuring. Is there any Linux out there that would be suitable for me? I'd like for it to run fairly fast as my G4 is only 256mb RAM.
I do remember looking into this before but, at that time, the only useable Linuxs didn't have immediate support for the Airport card and you needed to download these drivers and install them from the command line interface and it was very confusing.
View 4 Replies
View Related
Nov 7, 2008
my problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
View 4 Replies
View Related
Nov 25, 2008
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
View 5 Replies
View Related
