i was wondering, how hot is the little magsafe connector on the mac book pro supposed to be. i've heard about issues of them burning so i wanted to make sure of the heat issue. when i touch the sides of it it's pretty hot, hotter than the rest of my machine. is this normal?
View 5 Replies
This is quite an interesting situation I'm in.
Today during High School, my first period, I noticed a Mac iBook G4 in the recycle pile used by my schools Tech department. I decided to swoop it up and give it a whirl, and see for myself what the problem with it was.
When I first powered it on, I was receiving a scrambled signal on my display. It was merely a white screen with lines in it, after a while of tinkering, even grabbing a few mac knowledgeable buddies of mine to see if they could do anything. It seemed like this would drag on, and I would not fix it.
In the end, we ended up tapping the screen and seeing a faint hope of light, that light was the appearance of the desktop! Unfortunately, the screen soon vanished back into it's scrambled state. Upon further tapping, we could only figure it was a problem with the connection of the display to the logic board.
My sister has just broken off the central pin to her iBook G4 which is now wedged inside the connector. Obviously the ac adapter is screwed and needs replacing but short of pulling out the offending pin from the inside of the connector, would I have to replace the power supply? How complicated is this? Cost? Any guides etc?
View 3 Replies View RelatedI just bought a new Logic Board for a 1.25Ghz eMac and I've put almost everything back together after installing it until I ran into a problem. The power button cable that runs from the power button on the casing into the logic board has no connector on the Logic Board itself, now I have an old logic board that whilst being broken has a connector on it but I really don't want to have to solder the connector on for fear of breaking the logic board.
View 3 Replies View RelatedI was attempting to replace the hard drive in my eMac, but for instructions I HAD to follow some darn take-apart guide that said pull out the connection for the power button cord from the logic board. I didn't know that it was SOLDERED in there, and now I can't complete putting my eMac back together without doing so.
Can this be fixed without having to send it to Apple? Does it HAVE to inolve soldering, or is there an alternative? Is there a way I can temporary have my eMac power on until I get the connector fixed?
My power connector strip has broken apart on my iBookG4. In the past, I would put it on, by using a safety pin, to short-circuit it to fire it up. It eventually froze up, I took the battery out and put it back in. Previously, in the past this has worked to get it back on. However, now I cannot get it back on.
View 1 Replies View RelatedJune 5th to September 19th.....not too bad, considering the laptop has been on the road quite a bit.
I finally lost (seems so, at least ) that little semi-clear plastic cap shaped like a rectangle with rounded edges that covers/protects the connector of the MBP power supply when it's not connected to the computer (and being transported).....at least, that's what I used it for.
I did a quick search and couldn't find any relevant posts, so sorry in advance if this has been addressed.
Does Apple or someone else sell a replacement for such a dinky little thing.....although, frankly, I found it to be quite useful to protect the connector .
I know it doesn't have a lot to do with Apple specifically but it is hardware and there was nowhere else suitable.
I bought a record player over ebay and the only thing missing is the power cable. It is an AC input and the connector looks like this.
picked up an Arctic Cooling Accelero S1 for my X1900XT card. Got tired of hearing the stock fan kick up every month or so needed to be vacuumed out as the fins got clogged. Anywho, the cooler is designed to work alone without a fan and is working great, however I would like to install the fan module for the cooler to give it just a bit more cooling power, especially with hot Alabama summers on the horizon. Does anybody have a spare stock X1900XT fan 3 pin power plug available or know of a source of one? My Mac Pro is still under Applecare, so if anything happens and I need to get it back to Apple I need to return the video card to stock form, thus not allowing me to use the plug that is on the stock fan I removed.
View 3 Replies View RelatedI have a week old new Mac Mini (2.3 Ghz Intel Core 5; 4 GB of RAM) and noticed its power cable is loose. I don't seem to be alone online like in [URL]... Is there a fix for this like a better power cable?
View 4 Replies View RelatedI'm considering to get an additional battery for my MBP (Alu Unibody)
Wondering is there a cable/connector for connecting the battery directly to the MagSafe power port?
Only manage to find "FastMac�s TruePower U-Charge", which seems rather useful but it's not available for Unibody MBP YET
Im trying to rebuild a 20inch g5 imac. While replacing the bezel today i removed the screen and broke the pins that connect the connector from the motherboard. Can this be repaired or must I purchase a new screen?
View 1 Replies View RelatedImportant: Includes wide width connector (approximately 1.5 inches wide). This display will not work with iBook G4s with a narrow display data cable connector. The correct LCD for iBooks with a narrow width connector can be found here.
[URL]
Is it just mine or does this new mini power connector come out too easily? I have to be very careful removing the ethernet cable or FW800 cable lest the power connector slip out and cause a hard shutdown. It's a bit annoying.
View 20 Replies View RelatedMy girlfriend has a 12 inch Powerbook G4. She noticed that the battery life was starting to dwindle. Tonight, she tried using it. It wouldn't power up. The battery indicator showed one flickering power circle. The adaptor has the green circle on it, indicating the battery has a full charge. However, the computer won't charge up.I've read the 12 inchers don't have separate PMUs. Could that prevent the machine from starting? She was using it earlier this evening, as she e-mailed me pictures from our vacation.
View 10 Replies View RelatedI have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies View RelatedI'm using a B&W Power Mac G3 with 512MB RAM and OS X Tiger for a SMB file server (with 5 users) and a USB printer server. Everything is working good, but I have a problem.
It doesn't have a monitor or keyboard/mouse attached normally (I can configure it via VNC). The problem is that I would like to be able to turn the machine off when it's not needed (like at night sometimes, days when I won't be home, etc.). I would like to just hit the power button and have it turn off, however it puts it to sleep instead.
Normally, sleep would be fine, except on the B&W, the fans still run, just the HDs shut off, so it's still noisy as heck.
Is there a way to make the power button shut it off? If not, any other easy methods of shutting it off you can think of? Via VNC won't cut it, as my dad needs to be able to turn it on (not a problem) or off as well.
I have a PowerMac G5 with the first motherboard that is out of order, and another PowerMac
G5 Late 2005
with 2x2.0GHZ
Mounting the powersupply from the 2004 on the 2005 is the powersuply compatible or not?
EDIT: I looked on Mactracker and compared the two:
Max Watts in the first is 604W and 450W on the late 2005.
I want to put a powersuply from a G5 2004 (604W ) on a G5 2005 that had a 450W powersuply is this possible ?
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
Today I connected my macbook pro to my LED Cinema Display and the MagSafe connector's light was blinking like a hard disk's status light. Is this normal?... it's blinking rapidly like when the light of an external HD is showing the disk is in use. Something like that.
I just checked the battery status in iStats and it's giving me a 91% healthe.. . How could that be if this mac is 6 months old.
I have a late 2008 Macbook Pro 15" with the 2.53 GHz 6MB L2 cache processor and the 512 MB 9600GT. While tearing it down, I accidentally took the entire fan connector of the leftside fan completely off the logic board. I took it to the Apple store, where they said that they wanted $1,500 to buy a new logic board. I have this weird feeling that they are trying to rip me off, and that they could have repaired the fan connector. Does anyone have a method to reattach the connector or something? It doesn't matter if it will void the warranty because it's already expired.
View 4 Replies View RelatedI assume the DVI out on the 2007 MacBook Pro (model identifier 3,1) is a nonstandard DVI and requires a DVI-to-DVI adapter? It looks like a fullsize connector that I could attach with a standard DVI, but I thought I needed a 30.00 adapter, is this true?
View 5 Replies View RelatedI'm thinking about buying one of the Hypermac External Batteries ([URL]) for traveling and such.
They offer their models with either the old Magsafe connector or the new, silver, tubular connector. I would prefer the tubular connector, but I have the old style MBP (non-unibody).
Is the new style connector compatible with the old style MBP?
Im fixing up a macbook, and there was problems with the battery connector. So I pulled it out. But on the LB there were only 9 holes (6 on one side, 3 on the other) and no hole where the 7th ones should be. And on the connector in those spots it was the same thing, but what is even weirder, is that it doesnt even look like the pins were broken off, just that there was nothing there, and on the top it doesnt have any solder on those points. Any ideas what to do and how to do it??? And if you want i can post pictures.
View 3 Replies View RelatedDoes anyone think apple should change all the magsafe connectors to be like the ones on the macbook air? I think those look better than the all white ones that ship with the mb and mbp.
View 3 Replies View RelatedI just got my MacBook back from depot and they say they replaced something called a "Connector", which is listed as item number 631-0557. I have no idea what it is but on my sheet it falls under the symptom "Enclosure - Mechanical/Cosmetic Damaged". I had this replaced once before but I don't know what it is.
THe two times it has been replaced both the battery and the top case have been replaced as well. What is it? Anybody know?
I have problem with USB ports on my new 13" MacBook Pro. Right USB connector now stop work.When I connect mouse to right USB connector - nothing happend, USB don't work. On the lest USB connector mouse work fine.When I connect not powered HD to left connector - LED od HD light but not visible on MAC. When I connect HD via power USB HUB to left USB connector it works. Right connector looks dead.In the System profiler I don't see IR Receiver which is connected to right USB HUB.Do you think that is HW or SW problem?
I just bought a new i7 15" MBP a couple days ago to upgrade my old 13" black MB. I noticed that the the magsafe connector that came with it had a different looking tip. I'm not sure if I like it. It seems awkward and I know the "correct" way to put it is the cord away from the USB/FW/etc ports - which requires another "extra" (=P) step rather than the old magsafe that seemed relatively simple since it was tiny and just jutted out from the tip.
View 1 Replies View RelatedI really like the new design of the Magsafe power cord connector. But both designs still put stress on the cord at the connector, if your Macbook is moved. I hope Apple gives the Magsafe a swivel, so the cord can move more freely as the laptop is moved. Am I the only one thinking this would be a good idea?
View 3 Replies View Relatedsome times the screen goes black unexpectedly and if I move the screen it goes back to its noramal condition ! I went to the apple store and they said that it is for the connector of LCD what can I fix this problem ? do you know anything about the technology of this macbook's LCDs ?! can I fix it by myself ?!
View 3 Replies View Related
