MacBook :: Battery Connector To Motherboard?
Dec 18, 2010
Im fixing up a macbook, and there was problems with the battery connector. So I pulled it out. But on the LB there were only 9 holes (6 on one side, 3 on the other) and no hole where the 7th ones should be. And on the connector in those spots it was the same thing, but what is even weirder, is that it doesnt even look like the pins were broken off, just that there was nothing there, and on the top it doesnt have any solder on those points. Any ideas what to do and how to do it??? And if you want i can post pictures.
View 3 Replies
ADVERTISEMENT
Nov 17, 2009
I recently had a problem where my 13" 3 yr old macbook would just blink off. then it became shorter and shorter until it would not start up. i brought it to apple who told me after inspection that it had liquid damage and the battery connector and logic board needed to be replaced for an astounding 800+ dollars. the book only cost me 1100!! i got the book back (obviously i didnt pay that, i am sane!), i fiddled with it by trying to start with just the battery. no response. with the battery and charger. starts for just seconds. and then with just the charger. walla! starts up and runs like new.
View 3 Replies
View Related
Jul 3, 2012
After 1.5 years of use, my MBP's hard drive failed. So I purchased a new SSD and followed carefully the installation guide on [url].. and also [url]..
After the installation my macbook was unable to power up. I took it to Apple Genius Bar and the guy told me my Logic Board has been damaged, possibly because of the installation. He also told me I was not meant to disconnect the battery connector because this causes damage to Logic Boards.
Info:MacBookPro, Mac OS X (10.7.2)
View 6 Replies
View Related
Oct 16, 2009
After my mac shop swapped out the mobo in my macbok pro, coconut battery shows Battery Age: 24468 months? How can I get back to my good old 2 months?
View 7 Replies
View Related
May 4, 2009
I'm considering to get an additional battery for my MBP (Alu Unibody)
Wondering is there a cable/connector for connecting the battery directly to the MagSafe power port?
Only manage to find "FastMac�s TruePower U-Charge", which seems rather useful but it's not available for Unibody MBP YET
View 9 Replies
View Related
Dec 22, 2007
Strange problem since I got my MB back from the apple store (got a new hd). Now, every so often, the cursor will jump to a different part of the screen, often when I'm typing. You can imagine how frustrating that can be!
Was the case put back together wrong? Hiccup with the motherboard?
First gen white Macbook 1.83 with 2 GB, running 10.4.11
View 24 Replies
View Related
Jul 26, 2010
I've been experiencing a variety of problems with my peripheral devices. At first it started with my monitor and I thought it was going out... it was having lines (darker lines, like flickering) all over the screen... but then I realized this happened when I plugged something into my computer... so for example if my external monitor is on, and I plug in my firewire soundcard it starts to flickr...
Then it started to do it when I would plug in my printer... now if I plug in my firewire soundcard my monitor turns on and off... and I'm having sync issues with my soundcard.
I wiped my computer, reset the SMC and the PRAM and NVRAM. How do I test if my mother board is crapping out?
View 2 Replies
View Related
May 6, 2012
What is the best was to diagnose possible motherboard faults on a Mac? I'm having various problems which appear to be hardware related (i.e. re-formatting, re-loading OSX, etc don't seem to fix them and the problems appear at different times running different processes) so want to check the motherboard out.Typical problems are a USB hard drive suddening going off-line, the DVD burner suddenly resetting itself for no reason, screen not redrawing properly etc. and all these only happen occasionally. The only test I can find is a RAM test (various programs allow this including Tech Tool Pro 6) but is there a way to test other components?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Jul 30, 2009
I want to update the motherboard drivers on my late 08 15" MBP, but arent 100% what chipset it uses... i thought it was the nforce 7series, but 7 what? or what is the actual chipset? CPUID wont give me any info
View 5 Replies
View Related
Apr 22, 2010
I sent in my MBA for repair last week to a repair depot, and they say that there is corrosion on the motherboard from liquid damage. The problem with me is that the computer has never had any contact with liquids, especially in the area where the motherboard is. Can anyone show me where the corrosion is on this?
(attached photo is from repair depot)
View 24 Replies
View Related
Aug 3, 2009
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
View 9 Replies
View Related
Feb 19, 2010
Today I connected my macbook pro to my LED Cinema Display and the MagSafe connector's light was blinking like a hard disk's status light. Is this normal?... it's blinking rapidly like when the light of an external HD is showing the disk is in use. Something like that.
I just checked the battery status in iStats and it's giving me a 91% healthe.. . How could that be if this mac is 6 months old.
View 11 Replies
View Related
Apr 7, 2010
I have a late 2008 Macbook Pro 15" with the 2.53 GHz 6MB L2 cache processor and the 512 MB 9600GT. While tearing it down, I accidentally took the entire fan connector of the leftside fan completely off the logic board. I took it to the Apple store, where they said that they wanted $1,500 to buy a new logic board. I have this weird feeling that they are trying to rip me off, and that they could have repaired the fan connector. Does anyone have a method to reattach the connector or something? It doesn't matter if it will void the warranty because it's already expired.
View 4 Replies
View Related
May 20, 2012
I assume the DVI out on the 2007 MacBook Pro (model identifier 3,1) is a nonstandard DVI and requires a DVI-to-DVI adapter? It looks like a fullsize connector that I could attach with a standard DVI, but I thought I needed a 30.00 adapter, is this true?
View 5 Replies
View Related
Nov 27, 2010
First of all, I understand I committed an error and the consequences are my fault.I bought a MacBook Air for $999. Because of the all-aluminum frame and the no-moving-parts hard drive, I expected it to be durable. Unfortunately, while moving a coffee cup to my lips, I spilled a drop or two of coffee on my brand-new MacBook Air. It shut down in about 30 seconds forever, a total loss. All my data is 100% gone forever. $700 to repair.Of course, I am responsible for my own mistake. Yet, when you start to google: " 'MacBook Air' water", you see legions of customers who have encountered this problem. Couple drops of water in the top--total loss. Why? The aluminum housing acts like a bath tub.
View 24 Replies
View Related
Dec 14, 2009
I recently found my old 12" powerbook g4 and I was considering a project to install a new Intel logicboard.motherboard in it to bring it up to todays standards for cheaper then buying a new 15" MBP to replace my dieing 2.2 ghz Santa Rosa model. If I remember correctly my PB only has a bad logicboard and hdd which I will hopefully replace with an sdd if possable.
View 4 Replies
View Related
Apr 14, 2010
the processor in the new macbooks was user replaceable or is it soldered to the motherboard?
View 4 Replies
View Related
May 6, 2010
I got my motherboard replaced a few months back and i am now just noticing that my backlit keyboard is no longer working. Is there away for me to connect it as i no longer have warranty.
View 1 Replies
View Related
Jul 27, 2010
So a co-worker has a black MacBook that his family managed to spill some liquid on. It no longer works properly, of course. He just wants to get a new computer, so he's giving it to me. I'll get all of his data off the HDD for him and then I can keep the MacBook. It's definitely a big step up from my PowerBook in terms of speed and performance (I'll miss the dedicated card and FW800, though).
I figure it can't hurt to try to clean the motherboard/logic board in the computer to see if I can get it running. Worse comes to worst, I can buy a new logic board for the computer and put it in and be set. Some questions:- What's the best way to clean a motherboard? I've seen everything from isopropyl alcohol to distilled water to just a gentle detergent and warm tap water.
- What's a good way to tell what model the computer is from the serial number? I will get the actual computer tomorrow, but my co-worker can't remember which model it is.From my research it could be anywhere between the 2 GHz and the 2.4 GHz, though he bought it refurbished from Apple last year so I'm guessing it's the 2.4 GHz model.- If the logic board is shot, and it's not the 2.4 GHz model, does anyone know if the 2.4 GHz board can be put in a non-2.4 GHz machine?
It's not every day one comes across a free Mac, so it's definitely something to put some effort into. Once I max out the RAM and put a new drive in (maybe even an SSD in an optibay) the computer should be quite capable.
View 24 Replies
View Related
Sep 22, 2010
I'm thinking about buying one of the Hypermac External Batteries ([URL]) for traveling and such.
They offer their models with either the old Magsafe connector or the new, silver, tubular connector. I would prefer the tubular connector, but I have the old style MBP (non-unibody).
Is the new style connector compatible with the old style MBP?
View 2 Replies
View Related
Dec 19, 2010
My power connector strip has broken apart on my iBookG4. In the past, I would put it on, by using a safety pin, to short-circuit it to fire it up. It eventually froze up, I took the battery out and put it back in. Previously, in the past this has worked to get it back on. However, now I cannot get it back on.
View 1 Replies
View Related
Jul 21, 2006
i was wondering, how hot is the little magsafe connector on the mac book pro supposed to be. i've heard about issues of them burning so i wanted to make sure of the heat issue. when i touch the sides of it it's pretty hot, hotter than the rest of my machine. is this normal?
View 5 Replies
View Related
May 4, 2009
Does anyone think apple should change all the magsafe connectors to be like the ones on the macbook air? I think those look better than the all white ones that ship with the mb and mbp.
View 3 Replies
View Related
Jun 4, 2009
I just got my MacBook back from depot and they say they replaced something called a "Connector", which is listed as item number 631-0557. I have no idea what it is but on my sheet it falls under the symptom "Enclosure - Mechanical/Cosmetic Damaged". I had this replaced once before but I don't know what it is.
THe two times it has been replaced both the battery and the top case have been replaced as well. What is it? Anybody know?
View 2 Replies
View Related
Mar 4, 2010
I have problem with USB ports on my new 13" MacBook Pro. Right USB connector now stop work.When I connect mouse to right USB connector - nothing happend, USB don't work. On the lest USB connector mouse work fine.When I connect not powered HD to left connector - LED od HD light but not visible on MAC. When I connect HD via power USB HUB to left USB connector it works. Right connector looks dead.In the System profiler I don't see IR Receiver which is connected to right USB HUB.Do you think that is HW or SW problem?
View 1 Replies
View Related
May 13, 2010
I just bought a new i7 15" MBP a couple days ago to upgrade my old 13" black MB. I noticed that the the magsafe connector that came with it had a different looking tip. I'm not sure if I like it. It seems awkward and I know the "correct" way to put it is the cord away from the USB/FW/etc ports - which requires another "extra" (=P) step rather than the old magsafe that seemed relatively simple since it was tiny and just jutted out from the tip.
View 1 Replies
View Related
Oct 12, 2010
I really like the new design of the Magsafe power cord connector. But both designs still put stress on the cord at the connector, if your Macbook is moved. I hope Apple gives the Magsafe a swivel, so the cord can move more freely as the laptop is moved. Am I the only one thinking this would be a good idea?
View 3 Replies
View Related
Oct 27, 2010
some times the screen goes black unexpectedly and if I move the screen it goes back to its noramal condition ! I went to the apple store and they said that it is for the connector of LCD what can I fix this problem ? do you know anything about the technology of this macbook's LCDs ?! can I fix it by myself ?!
View 3 Replies
View Related
Aug 1, 2008
Extremely annoying as it drops out of the charger all the time.
The top part actually sticks to the MacBook with the magnet, but the bottom thing just falls out.
Apple in Germany is sending me a replacement, but they had never heard of the issue so I had to send them pics.
View 16 Replies
View Related
Jun 28, 2010
Was thinking about accessories for my MBP and I was thinking about the display port. What I want to do is when on vacations plug my MBP into the TV and show the pictures I took. I know Apple used to give them to you for free when you got a new MacBook or MacBook Pro. But since most were wasted, they stopped. So now, if you call Apple Support or whatever, can you get one for free per request? I really don't want to pay $30 for this little cable.
View 11 Replies
View Related
