I just bought a new i7 15" MBP a couple days ago to upgrade my old 13" black MB. I noticed that the the magsafe connector that came with it had a different looking tip. I'm not sure if I like it. It seems awkward and I know the "correct" way to put it is the cord away from the USB/FW/etc ports - which requires another "extra" (=P) step rather than the old magsafe that seemed relatively simple since it was tiny and just jutted out from the tip.
Does anyone think apple should change all the magsafe connectors to be like the ones on the macbook air? I think those look better than the all white ones that ship with the mb and mbp.
Today I connected my macbook pro to my LED Cinema Display and the MagSafe connector's light was blinking like a hard disk's status light. Is this normal?... it's blinking rapidly like when the light of an external HD is showing the disk is in use. Something like that.
I just checked the battery status in iStats and it's giving me a 91% healthe.. . How could that be if this mac is 6 months old.
I'm thinking about buying one of the Hypermac External Batteries ([URL]) for traveling and such.
They offer their models with either the old Magsafe connector or the new, silver, tubular connector. I would prefer the tubular connector, but I have the old style MBP (non-unibody).
Is the new style connector compatible with the old style MBP?
I really like the new design of the Magsafe power cord connector. But both designs still put stress on the cord at the connector, if your Macbook is moved. I hope Apple gives the Magsafe a swivel, so the cord can move more freely as the laptop is moved. Am I the only one thinking this would be a good idea?
I dropped my MacBook Pro only about 12 inches and the corner of the shell where the Magsafe connector is located was bent slightly inward. When connected to the AC power there is enough power going through to run the laptop. However, the battery is not charging and now has no green lights when I push the button on the battery. I checked and the battery has been through 129 cycles so should still be good. I'm assuming that means something was damaged with the Magsafe connection when the corner was dented. Does anyone have any advice? How much it would cost to repair the Magsafe connector? My MacBook Pro was purchased in 2007 and I have no other issues with it. Would it be worth repairing or should I get a new one?
Macbook Pro 2.2. Is there a way to replace just the magnetic area. One of the electric pins inside is not springing out. The connector ends up getting warm and now it will not even charge. I am using girfriend's macbook magsafe. I dont want to have to buy a new magsafe when I could possibly just replace the connector.
Does anyone else here prefer the old MacBook Pro 13" MagSafe connector to the new one?
I understand that the new one is made of aluminum and is more streamlined and will not bend off when using the computer on your lap. But the parallel configuration of the cord means it's either getting in the way of all your ports or you have to loop it to the back, which isn't always the best solution when you're on the go. I also noticed that the MagSafe wobbles a bit when it's connected, and the magnetic force doesn't seem to be as strong.
The MagSafe on my 2009 MacBook Pro 13" is solid. Perfect fit, great attachment strength, and I actually find the perpendicular cord placement more convenient for my uses. The white plastic tip doesn't match as well with the aluminum unibody, but it's not a problem for me.
I have a late 2008 Macbook Pro 15" with the 2.53 GHz 6MB L2 cache processor and the 512 MB 9600GT. While tearing it down, I accidentally took the entire fan connector of the leftside fan completely off the logic board. I took it to the Apple store, where they said that they wanted $1,500 to buy a new logic board. I have this weird feeling that they are trying to rip me off, and that they could have repaired the fan connector. Does anyone have a method to reattach the connector or something? It doesn't matter if it will void the warranty because it's already expired.
I just got my MacBook back from depot and they say they replaced something called a "Connector", which is listed as item number 631-0557. I have no idea what it is but on my sheet it falls under the symptom "Enclosure - Mechanical/Cosmetic Damaged". I had this replaced once before but I don't know what it is.
THe two times it has been replaced both the battery and the top case have been replaced as well. What is it? Anybody know?
picked up an Arctic Cooling Accelero S1 for my X1900XT card. Got tired of hearing the stock fan kick up every month or so needed to be vacuumed out as the fins got clogged. Anywho, the cooler is designed to work alone without a fan and is working great, however I would like to install the fan module for the cooler to give it just a bit more cooling power, especially with hot Alabama summers on the horizon. Does anybody have a spare stock X1900XT fan 3 pin power plug available or know of a source of one? My Mac Pro is still under Applecare, so if anything happens and I need to get it back to Apple I need to return the video card to stock form, thus not allowing me to use the plug that is on the stock fan I removed.
I've got the new i5 mbp which has the right angle magsafe plug. Can I use any older magsafe adapter on the machine?I need 2 more (one for work and one for home), i'm too lazy to take it out of the bag, or I always forget to put it back when I need it.
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
I assume the DVI out on the 2007 MacBook Pro (model identifier 3,1) is a nonstandard DVI and requires a DVI-to-DVI adapter? It looks like a fullsize connector that I could attach with a standard DVI, but I thought I needed a 30.00 adapter, is this true?
Im fixing up a macbook, and there was problems with the battery connector. So I pulled it out. But on the LB there were only 9 holes (6 on one side, 3 on the other) and no hole where the 7th ones should be. And on the connector in those spots it was the same thing, but what is even weirder, is that it doesnt even look like the pins were broken off, just that there was nothing there, and on the top it doesnt have any solder on those points. Any ideas what to do and how to do it??? And if you want i can post pictures.
My power connector strip has broken apart on my iBookG4. In the past, I would put it on, by using a safety pin, to short-circuit it to fire it up. It eventually froze up, I took the battery out and put it back in. Previously, in the past this has worked to get it back on. However, now I cannot get it back on.
i was wondering, how hot is the little magsafe connector on the mac book pro supposed to be. i've heard about issues of them burning so i wanted to make sure of the heat issue. when i touch the sides of it it's pretty hot, hotter than the rest of my machine. is this normal?
I have problem with USB ports on my new 13" MacBook Pro. Right USB connector now stop work.When I connect mouse to right USB connector - nothing happend, USB don't work. On the lest USB connector mouse work fine.When I connect not powered HD to left connector - LED od HD light but not visible on MAC. When I connect HD via power USB HUB to left USB connector it works. Right connector looks dead.In the System profiler I don't see IR Receiver which is connected to right USB HUB.Do you think that is HW or SW problem?
some times the screen goes black unexpectedly and if I move the screen it goes back to its noramal condition ! I went to the apple store and they said that it is for the connector of LCD what can I fix this problem ? do you know anything about the technology of this macbook's LCDs ?! can I fix it by myself ?!
Was thinking about accessories for my MBP and I was thinking about the display port. What I want to do is when on vacations plug my MBP into the TV and show the pictures I took. I know Apple used to give them to you for free when you got a new MacBook or MacBook Pro. But since most were wasted, they stopped. So now, if you call Apple Support or whatever, can you get one for free per request? I really don't want to pay $30 for this little cable.
I have a MacBook Air with Lyon OS. I have tried to show information on a LCD using the Mini DisplayPort to VGA Adapter, but i can`t. I only can to show power point presentations but excel, word or another information on those formats can´t be shown.
I've ever tried to upgrade a hard drive on a 13", 2007, white Intel MacBook.I was following the directions I had found on the internet.I've taken the old drive out, swapped the hard drive plate from the original drive to the new hard drive and tried to push it back into the same slot, but for some reason I can't get it to go all the way back into that slot the drive fits in.Strange enough, it also feels like it's pushing against something rubbery on the inside.It's less than a 1/4 inch from going all the way back in.I've made certain that all the screws are tightened all the way on the drive, but can't figure out why I'm getting resistence when I try to push it in that weeee little bit.I am certain that I have the drive flipped the proper way too, because I took note of how the original drive was oriented and made sure I duplicated that on this new drive.Like I had said before, it feels like there is something rubbery that's in the way, I just can't get to it.So I'm also curious if anyone knows if I were to take off the top cover on the laptop whether that would expose the hard drive so that I could see why it's not fitting into the connector properly.
June 5th to September 19th.....not too bad, considering the laptop has been on the road quite a bit.
I finally lost (seems so, at least ) that little semi-clear plastic cap shaped like a rectangle with rounded edges that covers/protects the connector of the MBP power supply when it's not connected to the computer (and being transported).....at least, that's what I used it for.
I did a quick search and couldn't find any relevant posts, so sorry in advance if this has been addressed.
Does Apple or someone else sell a replacement for such a dinky little thing.....although, frankly, I found it to be quite useful to protect the connector .
A few weeks ago, I discovered that when my Mini Displayport to VGA connector was plugged in, I heard a buzz through my speakers. It didnt bother me that much, so I just dealt with it. However, today I was plugging my external speakers in, and when the connector was about half way in.. I started to hear audio that I knew wasnt on my computer. Turns out it was commentary on a college basketball game. I started to listen some more, and discovered that it was 1530am. Seeing as I use just a standard set of 5.1 computer speakers... I found this to be extremely odd, so I figured id share this with everyone.
So I was swapping some hard drives around in my 12-hour old 15" June Unibody MBP and apparently I broke the hard drive cable. More like I tore 3/4s than broke it. Thankfully I was installing a SSD into the optical drive so I'm still up and running, I just don't have the stock HDD in there as a data drive.
I saw something on eBay for around $50 - I'll have to open the MBP back up and see precisely what the cable looks like - I'm wondering if there's a store that'll have the piece I require? I'd prefer to not take it to an Apple store and have them void my warranty because the HDD isn't user-serviceable part.
