PowerPC :: IBook G4 - Fixing Power Cable Connector?
Jan 4, 2008
This is quite an interesting situation I'm in.
Today during High School, my first period, I noticed a Mac iBook G4 in the recycle pile used by my schools Tech department. I decided to swoop it up and give it a whirl, and see for myself what the problem with it was.
When I first powered it on, I was receiving a scrambled signal on my display. It was merely a white screen with lines in it, after a while of tinkering, even grabbing a few mac knowledgeable buddies of mine to see if they could do anything. It seemed like this would drag on, and I would not fix it.
In the end, we ended up tapping the screen and seeing a faint hope of light, that light was the appearance of the desktop! Unfortunately, the screen soon vanished back into it's scrambled state. Upon further tapping, we could only figure it was a problem with the connection of the display to the logic board.
View 23 Replies
ADVERTISEMENT
Jul 15, 2008
My sister has just broken off the central pin to her iBook G4 which is now wedged inside the connector. Obviously the ac adapter is screwed and needs replacing but short of pulling out the offending pin from the inside of the connector, would I have to replace the power supply? How complicated is this? Cost? Any guides etc?
View 3 Replies
View Related
Dec 19, 2010
My power connector strip has broken apart on my iBookG4. In the past, I would put it on, by using a safety pin, to short-circuit it to fire it up. It eventually froze up, I took the battery out and put it back in. Previously, in the past this has worked to get it back on. However, now I cannot get it back on.
View 1 Replies
View Related
May 22, 2008
I have an old 14 inch ibook i use internet/mail my girlfriend recently damaged the power cable so cant get it to charge. Any suggestions as to where I might get a new one?
View 3 Replies
View Related
Jan 21, 2009
My old 1.33 12" iBook needs a new drive. I need some advice regarding the power switch cord. This says the power cord is soldered to the board: [URL] I can leave the top case connected by the power switch cord if required. Perhaps I could tape the case down during work on the back side and rotate the connected case left during work on the front side. This is slightly beyond my skill level. Great advice found here during searches. I plan to be very slow, methodical, and conscious of screws/step.
View 2 Replies
View Related
Jun 26, 2012
I have a week old new Mac Mini (2.3 Ghz Intel Core 5; 4 GB of RAM) and noticed its power cable is loose. I don't seem to be alone online like in [URL]... Is there a fix for this like a better power cable?
View 4 Replies
View Related
Sep 16, 2008
Important: Includes wide width connector (approximately 1.5 inches wide). This display will not work with iBook G4s with a narrow display data cable connector. The correct LCD for iBooks with a narrow width connector can be found here.
[URL]
View 2 Replies
View Related
Jul 21, 2006
i was wondering, how hot is the little magsafe connector on the mac book pro supposed to be. i've heard about issues of them burning so i wanted to make sure of the heat issue. when i touch the sides of it it's pretty hot, hotter than the rest of my machine. is this normal?
View 5 Replies
View Related
Aug 10, 2008
I recently noticed a dark corner on my iBook's screen I am not exactly sure what it is It does not show up when there was a white screen from a movie playing in fullscreen Anyone have any ideas??
View 2 Replies
View Related
Apr 2, 2010
I just bought a new Logic Board for a 1.25Ghz eMac and I've put almost everything back together after installing it until I ran into a problem. The power button cable that runs from the power button on the casing into the logic board has no connector on the Logic Board itself, now I have an old logic board that whilst being broken has a connector on it but I really don't want to have to solder the connector on for fear of breaking the logic board.
View 3 Replies
View Related
Nov 28, 2009
I was attempting to replace the hard drive in my eMac, but for instructions I HAD to follow some darn take-apart guide that said pull out the connection for the power button cord from the logic board. I didn't know that it was SOLDERED in there, and now I can't complete putting my eMac back together without doing so.
Can this be fixed without having to send it to Apple? Does it HAVE to inolve soldering, or is there an alternative? Is there a way I can temporary have my eMac power on until I get the connector fixed?
View 6 Replies
View Related
Feb 21, 2009
I am purchasing an iBook G3 in the next week as a notebook for school. I have a new iMac(intel) at home and I was wondering if I could use my iMac as a second monitor for my iBook and if so, how. I'm not sure what kind of cable to get or if it would work.
View 1 Replies
View Related
Feb 10, 2008
I have a iBook G4 laptop and there seems to be something very wrong with it. It started a few days ago just randomly. I was reading something on the internet and the screen went black on me, but the power was still on (I clicked CAPS LOCK to see if there was power). I then proceeded to push the power button and the power went off. When I pressed the power button again to turn it on, it made that internal noise it always makes and then the fan came on, and wouldn't turn off. There was no picture on the screen at all. Completely dead. But there was power, because when I clicked on the CAPS LOCK, the light came on). I tried pressing on the power button for at least 15 seconds and even went as long as a minute, and the power didn't go off.
View 3 Replies
View Related
Jan 8, 2007
does the older non-iSight iMac G5 have a built in PSU? (no external brick?)
what does the connector on the back of the iMac look like? (or the plug)
thinking about an older iMac G5 (vesa mountable) for a project Im working on
View 5 Replies
View Related
Apr 5, 2007
My iBook G4 power supply failed and I'm awaiting a replacement. In the mean time, can I use the power supply from my iBook G3 with the iBook G4?
View 1 Replies
View Related
Dec 24, 2007
Was on my PB last night, went to pick the power cable up by the transformer and it emitted a spark, a little bang and then some smoke.
It was very very hot. It was late, and I was slow to react and it remained plugged into the computer after this had happened still charging it as if nothing had happened.
The computer is fine too.
Basically, I'd like to know if anyone has had a similar issue happen to them, and if I should get a new power cord? Or if you think it is okay to carry on using this one.
I haven't plugged it in since last night to see if it works or not, I am worried it will break the lap top.
View 4 Replies
View Related
Oct 8, 2009
How long is the cable on the new 24" with the mini connector? Is there an extension cable available?
The Mac Pro will be on the side of my desk, maybe 6 ft to where the monitor will be?
View 2 Replies
View Related
Mar 2, 2012
I have a MacBook Air with Lyon OS. I have tried to show information on a LCD using the Mini DisplayPort to VGA Adapter, but i can`t. I only can to show power point presentations but excel, word or another information on those formats can´t be shown.
Info:
MacBook Air, New MacBook Air 13" display
View 1 Replies
View Related
Oct 29, 2005
so today was the day to replace the broken harddrive inside my 12" Al Powerbook and naturally I've ballsed it up.
The problem came at this stage of pbfixit's instructions. In pulling the power cable out of it's socket, I've pulled the bloody socket off the board.
So this is bad, that much is clear, and I need help, and lots of it. What's the best course of action now? It's not under warranty or anything, it was second hand to begin with.
For what it's worth, if anybody else finds this while searching for dismantling instructions, it's actually not too difficult. I would change this section of the instructions though, as I'm sure it'd be easier to lift up the top case slightly and then disconnect these two cables rather than fiddling through the tiny holes. I think going in that way give you a side angle and more opportunity to grip properly. And less opportunity to break your Powerbook. Anyhoo...
View 11 Replies
View Related
Jul 3, 2009
So I was swapping some hard drives around in my 12-hour old 15" June Unibody MBP and apparently I broke the hard drive cable. More like I tore 3/4s than broke it. Thankfully I was installing a SSD into the optical drive so I'm still up and running, I just don't have the stock HDD in there as a data drive.
I saw something on eBay for around $50 - I'll have to open the MBP back up and see precisely what the cable looks like - I'm wondering if there's a store that'll have the piece I require? I'd prefer to not take it to an Apple store and have them void my warranty because the HDD isn't user-serviceable part.
View 4 Replies
View Related
Aug 14, 2009
Looking at the Apple online store, the 24" Apple Cinema Display comes with:What's in the Box * LED Cinema Display* AC power cord* Cleaning cloth* Printed documentation So, my question is, do you have to buy the actual connector cable separate, or is it permanently attached to the display? I would like to connect it to a brand new MacBook Pro 15".
View 5 Replies
View Related
Dec 22, 2007
I thought I'd write this brief how-to incase anybody else ever needed the information. I have bought 3 power cords/connectors/adaptors for my iBook in the last three years - crazy, right? I stepped on the tip of the first one by accident, and was unable to bend in back into shape. The second one (a third party version by MacAlley) spontaneously conked on me, the brick stopped worked. And more recently my third, another third party bought cheap off eBay because I was fed up of paying, developed a connection issue somewhere in the wire (it worked fine, then I had to fiddle with the wire to get it to work, then it stopped working). With all these broken connectors sitting around, I figured there must be a way to solder them together and avoid paying another 30$ on eBay and being without a laptop for 2 weeks.
STEP ONE:
Assemble all the broken adaptors you have, asses what works with what.
- I took the brick from the original which was working fine and the tip from the 2nd cord (the one where the brick stopped working)
STEP TWO:
Cut off the tip from both cords, make sure to leave plenty of wire attached to the brick and tip your using.
STEP THREE:
Strip the tips of both wires, there should be two sections; an outside section (wrapped around the inside section) and an inside section. In the original Apple adaptor, the outside section was braided around the inside (which was incased in rubber) along with a yellow insulator. In the second adaptor (MacAlley) the outside was twisted around the separate inside wire.
STEP FOUR:
Clearly seperate the two sections of wire from each, then twist them together. MAKE SURE THEY TWO SECTIONS (INSIDE VS. OUTSIDE) ARE NOT TOUCHING. You don't want to short-circuit your adaptor.
STEP FIVE (optional):
Solder the wires together
STEP SIX:
Tie a knot in the power chord before the connection, to avoid accidental stress on the joint, and cover it all with electrical tape.
So far, its been working fine. But be warned, THERE IS SOME RISK INVOLVED WITH THIS PROCEDURE. My battery is charging fine and the iBook is powered as usual. I'm just waiting for the battery to fully charge to make sure the power adaptor stops charging the battery when its full (don't want a cooked battery!)
View 2 Replies
View Related
Dec 14, 2009
My daughter has an iBook G4 which she loves and uses daily for school. When she turned it on today it would power up but no display. The CAP Lock key will light up. I have reset the PRAM and PMU but no luck.
View 2 Replies
View Related
Oct 2, 2006
I'm currently out of the country doing field research and just the other night, there was a power outage here and now my ibook won't start up. Of course, being in a "third world" country, I wasn't able to invest in a good power surage protector.
Is my computer dead for good?
I have a lot of work that needs to be done and my computer is essential here. Anyway, I can rescue my computer? I press the power button and it does absolutely nothing.
What do you people think might be the problem and how much am I looking at to fix this?
View 1 Replies
View Related
Aug 3, 2007
I have an 14" iBook, 1.07 GHz and it won't use battery power. As soon as I unplug it it turns off. It worked fine until I opened it up and swapped in a DVD-RW and a new hard drive (the old one was failing). In the power section of system profiler it shows 98 load cycles and about a 75% remaining capacity. It may or may not be charging - I can't tell. The battery says it's fully charged at 95% and I have no way to drain it and see if it will recharge because the computer won't drink from the battery. I had another 14" iBook battery laying around that I thought worked, but now when I put it in this computer it just sits at 0% then eventually says the battery is dead (the menu icon shows an X through it).
View 2 Replies
View Related
Sep 16, 2008
My iBook G4 occasionally cuts out without warning when it's being powered by the battery.The battery still seems to have charge - it will light up all 4 charge lights when the button on the battery itself is pressed.It also boots back up straight away when the power on button is pressed after having cut out.This has never happened when the iBook is plugged in to the mains supply.
View 1 Replies
View Related
Nov 17, 2008
This is a mystery to me. Long story but the gist of it is that I found if I hold down the power-button on my iBook while it's off it goes into some weird mode. i.e. fan spins, disc spins, sleep light flashes and a tone comes from the speakers.Is this some sort of hardware test mode? Is it going to blow up? Is it resetting something?
View 12 Replies
View Related
Jul 23, 2010
The cord on the 45w power brick for my iBook G4 has frayed and is no longer usable. I am considering removing the jack from the iBook cord and splicing it onto a 45w yo-yo-style cord (originally used with a 1400) that I have. Are there any issues associated with this of which I should be aware? I want to resolve my problem, but do not want to break my computer in the process, of course.
View 1 Replies
View Related
Jan 27, 2007
I have a g3 dual usb ibook that has a DVD/CD drive, 640 ram and a firewire port. I just bought a G4 800 mhz tower that has a gig of ram, but it does not have DVD drive (it's a cdrw only). My Ilife install disk is a DVD, is there anyway to use the DVD drive on my ibook to install software onto the G4 tower? Both devices have firewire but if possible I would like to use an ethernet cable connection between the two. I dont have the correct firewire cable(it's expensive).
A second question is i an os 10.3 on my ibook and 10.4 on my G4 tower. Is there a easy way to transfer all my files, settings, ect... from the ibook to the G4 tower? I don have the osx 10.4 install discs either (if that matters).
View 2 Replies
View Related
Apr 2, 2007
I have an ibook G4 (2years old, a part of the battery swap program) that charges normally... for about twenty minutes. Then the light around the charger turns from it's normal "i'm charging" orange to nothing, the light goes out and the ibook switches to battery power. I've just inspected the power chord and there are no strains or tears, the plug at both ends are in good condition and the ibook power socket is fine too.
I've turned the ibook off for a period of time (two days) and reset the power manager... still no difference. The ibook looks and acts just like it should until about twenty minutes into the charge then the light turns off and it's like it's been disconnected. The chord is in correctly, i've even tried the apple extension chord = no joy. If i reconnect the power chord at the wall it's fine, starts charging again... and yes i've tried different sockets on different circuits in the house!
View 5 Replies
View Related
