PowerPC :: Wide Screen External Display With IBook G4
Mar 24, 2008
I have an iBook G4 which I want to use with a widescreen external display. I am not interested in gaming or doing anything fancy just surfing the web and working on documents and maybe looking at movies. I already have a hack that enables me to use a regular display which doesn't mirror the iBook screen. I just wondered whether I would encounter problems using a wide screen display and what the maximum resolution I should look for.
Important: Includes wide width connector (approximately 1.5 inches wide). This display will not work with iBook G4s with a narrow display data cable connector. The correct LCD for iBooks with a narrow width connector can be found here.
I got an 1.33 Ghz G4 iBook logic board, given to me as a working part. However, nothing else that goes along. I do have all the basic cabling such as speaker and power button, flex cables and such. Also got myself a new external AC power adapter. Now, I do not intend to use this as a laptop, thus, I will not be looking for a battery, just AC use. However, there's a big problem, I've no screen. I know there's this software hack that allows to connect an external display, in order to have a "mirroring" desktop.
I suppose that'd be achievable if I had the original screen to actually do the hack, but I don't have it. So, is there a way that I can just directly connect an external display and completely forget about the internal one? One more thing, suppose I can't do what I have in mind, if I actually found and borrowed an internal display, would I be alright if after the hack I give the internal display back to it's owner and continue with the external?
I have a 14'' iBook and recently bought an LG 19'' Widescreen monitor. I am testing a Dell 17'' on it right now before I open the LG one, but my problem is that the same screen shows on my ibook and the external. This isn't what I want. I have read you are supposed to be able to close the laptop and then it shifts to the external display but this is not working for me.
This is my goal: Use my bluetooth keyboard full time Have my ibook closed at all times Have my external as my main display How do I make this work?
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
My daughter has an iBook G4 which she loves and uses daily for school. When she turned it on today it would power up but no display. The CAP Lock key will light up. I have reset the PRAM and PMU but no luck.
My homeroom teacher's 14 inch G3 iBook's display has started displaying everything grainy. There are little dots everywhere on the display, and it is annoying. The head IT person at school is stumped. I am not sure of the exact version of OS X, if it might be a software issue. Could it be a sign of logic board failure?
I am creating a new image for some old iBooks that will be used in a school. To run a specific program I need to have OS 9.2 installed because it won't work any other way(even through the simulator). I have OS 10.2 installed on the master image iBook computer and have installed OS 9.2 through the restore disks. I can load up to both OS X and OS 9.2 but OS 9.2 does not take up the entire screen. It's contained within a small box in the middle of the screen.
My ibook has been working great and all of a sudden I have no display. It boots up fine, the eject button works, I can hear the volume if I turn it up or down. This is my second ibook and I really need this one to work! Its only 4 years old 800mhz,256,30GB. There are no apple repair places anywhere (other than the apple store) around here, so I'm not sure if there's something that I can do on my own?
I have a iBook G4 with a broken backlight. The iBook was custom painted Maroon (Only the back part of display and around the keyboard), and I don't like it. Will an iBook G3 12" display work on the G4?
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
A friend gave me one of these, said he didn't test it. i tested it but have observed the following: ring on PSU plug illuminates fine, was orange but now greed thus battery charges ok. battery button works too, pressing that initially showed 1 dot, now shows 4. charge ok and accepted. pressing the power button though, i hear the fan spin for 1 sec, the disk and the cd drive click in, but no chime and nothing on the display. no response nothing, a hard reset (hold power) turns it off. I did the PMU reset, and the pmu did do a reset, but nothing. I also did the PRAM, and again nothing. I am suspecting a faulty logic board, I hope i can get this going as aesthetically it's in good condition. For the info it appears to be an iBook G3 model A1007, If you need any more info then give me a shout.
just installed 10.5.6 on their last gen. iBook.She left the iBook plugged in to the mains and came back to find that the iBook was alternating between the grey Apple screen and a light blue desktop screen where she could see the cursor. Sometimes it would also switch to a blue screen without a cursor.
I've tried holding shift during startup - no effect. I've tried rebooting NVRAM - no effect.
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
Ever since I sold it here on MR and got it back, there has been a problem with my 12" Dual USB iBook G3 500MHz's screen (lord, that's a long name). Whenever the screen is tilted back farther than 45 degrees or so, the backlight shuts off. I can open the casing and fix it if it's possible. Does anyone know what the problem with it is? I'm trying to get it fixed up and ready to sell back to my friend as his first Mac, and I'm trying to get every problem resolved
I have an old Dell CRT I'm using currently with my iBook and I want to know how I can just use the display and close the iBook when at my desk without the computer sleeping. Currently if I try waking the computer with the keyboard or mouse, it wakes up for about five seconds before going back to sleep. Is there any way around this or do i just have to keep the iBook Open?
I'm trying to get an accurate identification of the iBook white G/3 700 MHz with 12in display we just acquired. There seems to be a couple of very similar models. The Apple Support article is unclear [URL]as to which one we have. One model is an early 2002 release (M8602LL/A), the other a late 2002 release (M8860LL/A).
also posted on apple discussion forums. My wife has a 12" ibook g4 1.33 mhz. It has been exhibiting the following symptoms with increasing frequency:
1) the display will completely dim to the lowest setting or cycle between bright and dim, as if pressing f1 and/or f2 repeatedly 2) some of whatever she was typing or working on at the time will be deleted 3) a string of repeated characters (usually q1aq1aq1a) will appear in her typing 4) often the desktop is brought to the front as if pressing f11 in expose 5) other than the problems described, the computer continues to work normally 6) problems are almost always related to moving the hinge position, but sometimes happen randomly, with no movement at all 7) it will sometimes occur many times a day, then not at all for several days 8) it seems to happen more often when the computer is not on a hard surface, but this may just be my imagination or some random bad luck
I am at a loss as to what the problem may be. I was thinking it might be the display cable because of the link to hinge position, but that wouldn't account for the random typing. Then I thought it was the motherboard, but the computer seems to work ok other than this. I did realize the other day that most of the problems are things on the left hand edge of the keyboard (display brightness, the q1a pattern), but this doesn't account for the deleted typing and the mysterious f11 thing. Does anybody have any thoughts? Am I looking at a display cable (hopefully this is it - I have no problems with disassembling/reassembling things)? Or is it the motherboard (probably means it would be more economical to get a new machine)? Or is it something else?
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
I have an 12" iBook 1Ghz that when I run an external monitor I get no green on the external display. Could I have the wrong dongle or is this a problem with the board? Anyone seen this before?
Hi- I have an ibook G4 (mid 2005). I'd like to be able to connect it to my new 22" external display so that I can have dual monitors. However, the external display plug obviously does not fit into the slot in the ibook.
Does anybody know the name of the converter cable I would need to buy in order to connect the external display to my ibook? And roughly how much these cost?
have an iBook 12" the screen and the screen is very grainy, disintergrated image and text?Loads up perfectly and functions are all good , just hard to read the vague image.Any clues?Supposedly it has had the motherboard replaced by the dealer who said it is the screen. But not sure if i can believe this.
I feel incredibly dumb but can you buy something to put inside an ibook (or any laptop for that matter) to give you more space to save things? or do you have to buy an external drive? I can see lots of info about memory upgrading (which makes your computer more efficient yeah?) but nothing about this, is this because it's so obvious that I should know?
