My homeroom teacher's 14 inch G3 iBook's display has started displaying everything grainy. There are little dots everywhere on the display, and it is annoying. The head IT person at school is stumped. I am not sure of the exact version of OS X, if it might be a software issue. Could it be a sign of logic board failure?
Is it me or did you never see a "dot" in the mini month view within Ical when you had an event on a day? I have it on the iphone on month view but I could have sword that I had this on my Mac?
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
It used to stay like that until either I'd move my mouse over the area, scroll the page up or down, or refresh. It only seemed to happen in browsers, not in Finder or anything. It's the worst when watching videos on YouTube or any kind of flash video. But works fine on Netflix. I say "used to" because the above screenshots are from July 2013. I sent my laptop away to Apple but they were "unable to reproduce the problem." I figure they just left the laptop open and waited. You have to use it like it's YOUR laptop and then it will happen. Anyways, now it's happening more often. Except it's just a flicker. Over and over again. I could record video of it, if necessary.
So, I'm running 10.9.3. I'm not sure what other information is needed. But my computer is up to date. I don't have warranty. I just want to know what is causing my computer to do this.
My daughter has an iBook G4 which she loves and uses daily for school. When she turned it on today it would power up but no display. The CAP Lock key will light up. I have reset the PRAM and PMU but no luck.
I got an 1.33 Ghz G4 iBook logic board, given to me as a working part. However, nothing else that goes along. I do have all the basic cabling such as speaker and power button, flex cables and such. Also got myself a new external AC power adapter. Now, I do not intend to use this as a laptop, thus, I will not be looking for a battery, just AC use. However, there's a big problem, I've no screen. I know there's this software hack that allows to connect an external display, in order to have a "mirroring" desktop.
I suppose that'd be achievable if I had the original screen to actually do the hack, but I don't have it. So, is there a way that I can just directly connect an external display and completely forget about the internal one? One more thing, suppose I can't do what I have in mind, if I actually found and borrowed an internal display, would I be alright if after the hack I give the internal display back to it's owner and continue with the external?
I am creating a new image for some old iBooks that will be used in a school. To run a specific program I need to have OS 9.2 installed because it won't work any other way(even through the simulator). I have OS 10.2 installed on the master image iBook computer and have installed OS 9.2 through the restore disks. I can load up to both OS X and OS 9.2 but OS 9.2 does not take up the entire screen. It's contained within a small box in the middle of the screen.
My ibook has been working great and all of a sudden I have no display. It boots up fine, the eject button works, I can hear the volume if I turn it up or down. This is my second ibook and I really need this one to work! Its only 4 years old 800mhz,256,30GB. There are no apple repair places anywhere (other than the apple store) around here, so I'm not sure if there's something that I can do on my own?
Important: Includes wide width connector (approximately 1.5 inches wide). This display will not work with iBook G4s with a narrow display data cable connector. The correct LCD for iBooks with a narrow width connector can be found here.
I have a iBook G4 with a broken backlight. The iBook was custom painted Maroon (Only the back part of display and around the keyboard), and I don't like it. Will an iBook G3 12" display work on the G4?
A friend gave me one of these, said he didn't test it. i tested it but have observed the following: ring on PSU plug illuminates fine, was orange but now greed thus battery charges ok. battery button works too, pressing that initially showed 1 dot, now shows 4. charge ok and accepted. pressing the power button though, i hear the fan spin for 1 sec, the disk and the cd drive click in, but no chime and nothing on the display. no response nothing, a hard reset (hold power) turns it off. I did the PMU reset, and the pmu did do a reset, but nothing. I also did the PRAM, and again nothing. I am suspecting a faulty logic board, I hope i can get this going as aesthetically it's in good condition. For the info it appears to be an iBook G3 model A1007, If you need any more info then give me a shout.
I have an iBook G4 which I want to use with a widescreen external display. I am not interested in gaming or doing anything fancy just surfing the web and working on documents and maybe looking at movies. I already have a hack that enables me to use a regular display which doesn't mirror the iBook screen. I just wondered whether I would encounter problems using a wide screen display and what the maximum resolution I should look for.
I have a 14'' iBook and recently bought an LG 19'' Widescreen monitor. I am testing a Dell 17'' on it right now before I open the LG one, but my problem is that the same screen shows on my ibook and the external. This isn't what I want. I have read you are supposed to be able to close the laptop and then it shifts to the external display but this is not working for me.
This is my goal: Use my bluetooth keyboard full time Have my ibook closed at all times Have my external as my main display How do I make this work?
I have an old Dell CRT I'm using currently with my iBook and I want to know how I can just use the display and close the iBook when at my desk without the computer sleeping. Currently if I try waking the computer with the keyboard or mouse, it wakes up for about five seconds before going back to sleep. Is there any way around this or do i just have to keep the iBook Open?
I'm trying to get an accurate identification of the iBook white G/3 700 MHz with 12in display we just acquired. There seems to be a couple of very similar models. The Apple Support article is unclear [URL]as to which one we have. One model is an early 2002 release (M8602LL/A), the other a late 2002 release (M8860LL/A).
also posted on apple discussion forums. My wife has a 12" ibook g4 1.33 mhz. It has been exhibiting the following symptoms with increasing frequency:
1) the display will completely dim to the lowest setting or cycle between bright and dim, as if pressing f1 and/or f2 repeatedly 2) some of whatever she was typing or working on at the time will be deleted 3) a string of repeated characters (usually q1aq1aq1a) will appear in her typing 4) often the desktop is brought to the front as if pressing f11 in expose 5) other than the problems described, the computer continues to work normally 6) problems are almost always related to moving the hinge position, but sometimes happen randomly, with no movement at all 7) it will sometimes occur many times a day, then not at all for several days 8) it seems to happen more often when the computer is not on a hard surface, but this may just be my imagination or some random bad luck
I am at a loss as to what the problem may be. I was thinking it might be the display cable because of the link to hinge position, but that wouldn't account for the random typing. Then I thought it was the motherboard, but the computer seems to work ok other than this. I did realize the other day that most of the problems are things on the left hand edge of the keyboard (display brightness, the q1a pattern), but this doesn't account for the deleted typing and the mysterious f11 thing. Does anybody have any thoughts? Am I looking at a display cable (hopefully this is it - I have no problems with disassembling/reassembling things)? Or is it the motherboard (probably means it would be more economical to get a new machine)? Or is it something else?
I just got a new 1.6 MBA but it is going back tomorrow. It has screen bleeding showing like mountains on the bottom and top of the screen. In addition, it is HOT (CPU 63-83 C). Way hotter than what I tested at the store (CPU 40-60 C). In addition, it has a tiny flicked (ripped) paint at the back which I am somehow ok with. I just wanted to share this with you and know if any of you facing similar issues? I have never ever seen screen bleeding in MBAs before since the MBA has the "best" screen ever. I hope that I'll get a better replacement.
Up until recently my PowerMac G5 has performed as it should for a computer its age. About two nights ago it shut itself down and I haven't been able to turn it on since. Power does cycle through the unit because all the fans will either cycle once or twice, or at the very least they will twitch. And now there's a tiny red LED on the motherboard and behind the power button that lights up whenever I try to power on the computer. I'm at a loss for where I need to go from here, though I feel rather certain that my computer has simply passed on. It's an original 2004 1.6 ghz single processor PowerMac G5, serial number unknown, since I can't turn it on.
I have an ibook g4 that will not boot, I figure its a bum hard drive since the hd doesn't show up in diagnostics. I am wondering if its possible to install os x on an external firewire hd through the ibook and run the ibook off that? The only reason I need the ibook is for portability with my dj program torq, I have 2 imacs, a 20" and a 24" but they aren't very portable.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
Right now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
I just bought a parts ibook from ebay, but I managed to fix it, except there was no hard drive. I currently have a 6 GB HD in it with OS X.3.9 on it, but I want tiger. I have the tiger family pack, so I have a license for it. It only has a CD-ROM drive, so I am wondering if I can buy a 40 GB HD, and clone the one from my G4 onto it.
SPECS ibook G3- 500 MHZ 192 MB RAM CD-ROM currently has 6 GB HD ibook G4- 1064 MHZ 1.25 GB RAM Combo drive 40 GB HD
So, I'll spare you guys the details, haha, but I am stuck trying to decide between getting an iMac Intel or a MacBook Pro for my home use computer. What would be the advantages of one over the other? I just really love the fact that a MacBook Pro would be portable yet powerful. And yes, I have this iBook for portability to school and such, but if I want to do extensive work on the couch, I could bring a MBP vs. an iMac. What do you all think? Are too laptops redundant?