PowerPC :: Connecting G4 To Internet Via Wireless Router To AEBS
Jul 1, 2008
I have a Power Mac G4 dual 876Mhz MDD ,recently bought. I am trying to connect to the internet and am having no problem when I connect an ethernet cable to a netgear Wireless router that shares the connection. However as I have an airport express base station, would it be possible to connect the airport express base station to the powermac via ethernet and then connect to the internet wirelessly via the netgear router and airport express base station?
I recently acquired an iBook G3 600MHZ with an Wireless B Airport Card. My router is a Netgear WNR2000 that is standard N but is backwards compatible with b/g. I have no idea how to set this up. I've tried and it doesn't connect. Oh, and I am running 10.2.8.
I went to Starbucks and it connected there instantly. So I don't know what's going on.
I have an OLD Ti Book. (667 MHz, G4; 1 GB RAM, running 10.4.11). Just bought a SISCO Linksys wireless-n router (dual band), high performance. It is set up properly, as my iphone is connecting and my work PC laptop connects too. I am assuming that my old, but kick ass powerbook does not have an airport card built in? So, I assume I need an adapter? We bought the adapter that went with the router, but after I got it home, realized it is only for windows. Did I miss the MAC one, or can I use this one.
I have an eMac 1Ghz with 10.3.9 on it and I just bought a new Lexmark Wi-Fi Printer. I have no Extreme card, just a Netgear Wired/Wireless router that's obviously connected to my eMac via CAT5 cable. I set up the printer for wireless, hoping my eMac would use the router as a card-substitute type deal. Well it doesn't. Cannot connect as if it were not there.
I recently purchased an iMac desktop and installed it in my home office. It worked fine, except that the airport was connecting erratically to the wireless router, which is located about 5-7 meters away in a different room. I tried re-positioning the iMac to have better 'reception' but the problem persists. I can see the number of airport connectivity 'bars' changing every second and then going off fully. Very frustrating.
Could there be a problem with the iMac antenna? A colleague told me that if there's a wireless phone in the house near the router that can cause problems. Another told me that the router (a basic D-link 802.11g, 5 yrs old) needs to be replaced.
I currently have the netgear router set with an IP address of 192.168.1.1 with DHCP enabled and no security set up (i originally had WEP enabled but this made the problem worse.
I then have two sitecom range extenders set up connected to the router wirelessly to extend the signal in opposite directions. One is set up with an IP address of 192.168.1.2 and the other 192.168.1.3 with default gateway set at 192.168.1.1 and DHCP disabled. This sets the network up working for a short time however as soon as more than one machine tries to connect to the network it all shuts down. It seems that the setup cannot assign IP addresses to more than machine at a time.
Is it possible for me to setup a wireless network/connection from my White Macbook to an Apple TV to share iTunes content WITHOUT a wireless router?
I'm house sitting for a month at Xmas, and they don't have internet in their place (they do, but its one of those wireless dongle things for a laptop)
Don't want Internet, i just want to be able to use my AppleTV i'm getting for xmas for all my media streaming without having to wait till i get my own place a few weeks later!
I have an Airport Express base station but its on a ship coming from London and wont arrive for a few more weeks
Till then looking for a simple (and free) solution
I've got a Mac Pro and a Linksys Wireless N Router. I've got my cable modem hooked up at the moment directly to my Mac Pro. I was wondering if there was a way to share my internet connection on my other connection to the router? In other words, internet comes into the Mac Pro, shares with the wireless router, which broadcasts it to a third computer.
So I have a wireless router from cox cable (motorola surfboard SBV5220). I also have my airport extreme base station connected to the wired ethernet in the other half of my house. So I have the cox motorola router hard wired to the ethernet in-wall outlets. And When I plug my computer directly into the ethernet plug in the walls it works great and fast. So I have the airport extreme plugged into the ethernet port in the wall to use wireless on the other half of the house that the motorola router doesn't reach very well.
Everything worked great until the motorola router went out one day and we had to reset it. Once we reset it, the wireless internet from the airport extreme started acting up. Half the time it works fine and just as fast as it did before. The other half it doesn't load a full page. It's not even working at all really. I tried to see if the problem happens when using the internet from the motorola router, but it wasn't consistent. Sometimes the airport internet worked fine while the motorola was in use on another computer and sometimes it didn't. I haven't been able to figure out a consistent cause.
I also had the airport express plugged in as a wireless extended for the airport extreme, but I took that out as it was pretty unnecessary. Also, I got a new mac mini and need to run it off the airport extreme wireless also. When I turn off the mac mini and use my macbook with airport extreme the problem still persists.
I tried google-ing and then searching on this forum and got many unrelated topics. I would really appreciate anybody pointing me in the right direction. I am a semi-newb when it comes to networking, etc...
I've got an iBook G3 with the B AirPort card installed that has worked fine until trying to connect it to the Linksys WRT610N. No matter what settings I use, AirPort cannot connect to the router. I've updated the router's firmware to the latest version, and am only using WPA, as WPA2 is not supported by the card. I've switch between TKIP and AES, which hasn't helped either. Also, I've changed the router between everymode (Mixed, Mixed B+G only, B only), and that hasn't worked either.
I really hope someone has an answer to this because this is really annoying. Right now my Macbook is connected to the internet via my wireless router but as soon as I want to load bootcamp and switch to windows 7 I have no internet connection. I have tried to follow this [URL] website in resolving the problem but as soon as I get to STEP 2 I get this message in the window "MMC could not create the snap-in." This message is making me unable to proceed to the other steps and it appears it locked me out so I'm unable to edit anything.
I'm looking into purchasing a new wireless router for our home. Basically used for basic Internet and video streaming. We are an apple family, No PC. Looked into the airport extreme but seems kinda pricey for what we need it for. Since we won't ever be gaming or running a server. Which wireless router do you use and how do you like it?
i've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?
This is my first ever mac that I've owned given to my by a friend, so excuse my simplicity. It's a G4 and I have a wireless internet access at home through Time Warner Cable. It doesn't seem to have an airport card. What is the easiest way to connect to wireless? What additional cards would I need to buy?
Recently I have been having issues loading internet content. When I try to load almost any website, my internet browser acts like it is searching for my wireless router and can't find it. However, when I use my PSP to connect to the internet from the same spot, it works perfectly fine. The PSP usually says there is a 70% connection, which is better than it has ever been. My router and laptop are on the same floor only a room away.
I have other people in my house that share the router: 6 computers; 4 are laptops that are used more often than the 2 desktops, 4 iPod Touches; 2 of which are never used. I had everyone turn off Bluetooth on all devices since none of us use that feature and that didn't help all.
I honestly don't know what the problem is, but if I had to make a guess, it would be all of the things that our devices can connect to with AirPort. There is Motorola, 2WIRE017, 2WIRE160, 2WIRE417, 2WIRE730, MartinWirelessRouter, NorzWireless, NETGEAR, schooly, and stackdaddy. I think all of these wireless connections are disrupting one another, which is what I thought was causing the problem. The only one I ever care to connect to is Motorola, so is there a way to prevent my computer from even recognizing anything else?
Imac and iphone lost internet connectivity via Linksys wireless router. Ehternet works fine. Keep getting note about "self-assigned" ip. Ideas? I have tried everything I have found and read.
I have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
To make a long story short, I moved to my girlfriend's place yesterday and I plugged in my iMac (20" 2.16 Ghz Intel C2D, 2GB RAM, ATI Radeon X1600/256MB VRAM) and I've been trying to connect to the Internet. Now, I couldn't have my iMac plugged directly were the router is located. Back at home, I never had any problems since I had my ethernet cable plugged into my iMac.
So this was my first time trying to connect via wireless or Airport (if that's even the same thing). Basically, I choose the network to log in and typed in the WEP key. I didn't get an error message so I assumed the key was fine. Also, it says that I'm connected to the network I'm on. However, when I try to get on Safari or MSN or something says I'm not connected to the Internet.
I just got a mcabook for christmas and when I tried connecting to my wireless network at home I am asked for a WEP password. I'm unsure of what this is or where to find it.
I am using a Ralink wireless usb dongle, and I can pick up multiple networks in my area.I can connect to a local WPA2 network, using the shared key, but can't connect to the internet in Safari or any other program.I used to be able to access the internet with this very same hardware, using what I thought was the same software, though with an open network. When I look in network prefs at the device, called "ethernet eng3" (I think), it says "connected, but may not work because of a self-assigned IP", or something to that effect.
What I'm trying to do is set up the apple tvs to be connected to a router that is not connected to the internet, which we'll call Router B.The Mac Mini has all the movies and TV Shows on the iTunes account is hardlined into another router that is connected to the internet, which we'll call Router A.Is it possible to have the Mac Mini hardlined into Router A (to have an internet connection) and simultaneously connected wirelessly to Router B (so the AppleTVs can pull from the Mac Mini iTunes.)?Or vice versa, hardlined into Router B (non internet connection) and Wireless to Router A (internet connection).
My wife has an iBook G3 500mhz with 320mb of ram. She is having trouble with the airport card that is installed in it. I have a 2.4ghz wireless access point in the upstairs of my house (next to my main machine) which is sending the signal to a 2.4ghz bridge in the downstairs. House is wood frame. She is having problems connecting to the wireless network. When she can actually connect, she has to be right next to a wireless router and even then it doesn't work sometimes to connect. Is the airport card going bad in this? Is it possible that the antenna has gone bad or has a kink in it or something?
i hooked up my wireless router, and it works fantastic on my macbook pro. however, on my powermac g4, i can't load anything, even the router ip address. at my old place everything worked. I have a feeling its just a simple setting, but I don't know what setting it would be.
i really want a new iMac but can't afford it right now. so i was thinking of getting an older iMac to replace the pc we have now. if i do do this can i use the wireless router that i have now with an iMac G3 or G4?
I just bought a Powerbook G4 from my school and the internet is sparatic but it is just at my house. I went to my friends house on Friday and it worked fine and at my school it does to. When I get home it either doesn't connect or goes from four bars to two bars. I have a Macbook and that works fine with the internet. I have tried re setting the router and nothing works. I have a Linksys router.
I've had this used laptop since last August, and up until last month the internet was super awesome and fast and lovely. Then, I'm alnost positive, the last update was like some big Adobe THING, and it seemed like soon after that my Airport connection was very low (like 1 or 2 out of 4 bars are full) in comparison to before, and my internet refused to load anything.
After googling around, I have: -Updated the firmware on my wireless router (Linksys wrt54gs) -Gone into my network settings and changed my dns servers to the OpenDNS.com ones, and also to the 4.2.2.1 and 4.2.2.2 ones. -completely restarted my router -changed the password on my router just in case someone was stealing my wireless connection?
None of these things have made any change. I have to click the reload button about 50 times, (no joke) in order for a page to at least halfway load and it's just ridiculous. Anyway, I'm not sure what is wrong or if I need a new router, but my desktop PC works fine (internet-wise) and my brother has a Gateway laptop that is running Windows XP that he also says suddenly got slow internet performance right around the time mine did. I'm running OSX tiger 10.4.2 (heh, i'm pretty sure)
I need advice choosing a wireless router. It will be permanently connected to a pc but I plan on using its wireless for my IBook G4. My wireless card is 54-Mbps AirPort Extreme WiFi 802.11g. I am looking for whatever will give me the highest speed, reliability, and least amount of interference (I live in an apartment complex with multiple networks).
I have G5 that I am running leopard on. I have an airpot extreme network setup in the house. The G5 shows its connected to the network but will not open internet pages. It was working fine a few days ago. I also have a Macbook that works great on the network and can connect to the internet. All the network settings seem to be the same for the G5 and the Macbook. Literally one day it worked and the next it did not. Is there a setting I am missing somewhere that would cause it not to be able to open internet pages?
