My lovely cat recently decided to walk around my desk while I was at work and knocked over my Imac, causing a large crack in the glass and the screen. I'm not technically capable enough to do the install of the screen/glass myself, but I was wondering what I should expect a repair from an Apple certified technician to run.
View 2 RepliesOk I got my new 21.5 inch but every time it boots up, it takes 45 seconds on a white screen then another 30 after the apple appears.
View 5 Replies View RelatedMy PowerBook 1.67 was having a screen issue (ever-present but mobile black spot about the size of a dime). I sent it back Apple and tracked the repair process. According to their repair status updates, within an hour of receiving the PB on Tuesday, is was on its way back to me. I should receive it late today or tomorrow.
Was just wondering if anyone else had this issue in the past and if Apple just replaced the screen. If so, was it new or refurbished, and how can you tell. Any odds that I've been upgraded to a MBP?
My 27inch iMac screen shuts off during screen saver and does not come back on unless restart machine?
Info:iMac, Mac OS X (10.7.3)
I have an old IMac G5 without an Intel processor. The other day I heard a whistle sound coming out of it. The next day I turned it on, got the apple and a revolving pinwheel. The picture of the apple was a little broken up. After a minute the pinwheel stopped. Tried to boot of the leopard CD. Same thing happened. Looked inside for swollen capacitors. Did not find any. Does anyone have any ideas as to what can be wrong.
View 2 Replies View RelatedSo I have a 1st Gen G5 1.8 Ghz imac. I had a bad power supply and got it fixed under Apple's warranty extension. Since I had it fixed it runs way warmer than it used to. The fans are also always on. Any idea on why this is and what can be done to fix it?
View 1 Replies View Relatedive got a macbook aluminum but my mums pc has crashed so since my switch over to apple i have been over impressed with the stability of mac computers.to cut a long story short i have had some great feedback from this site so wondering if you guys can help.ive seen a 17inch imac g5 1.8ghz ppc processor..and is it possible to run most streaming internet sites like youtube!! bbc iplayer. etc etc..and also can it run windows 7 so she can play some chinese games via flash...??
basically does flash support the power this imac produces..??
Apparently there might be a way to convert the HDMI to a miniDV display.
Is this really possible?
Has anybody really achieved it?
What kind of cable/adapter do you need to buy?
Supposedly this was fixed with 10.6.2
Anyone else still experiencing this?
Does anyone know if it's possible to use a 24 inch iMac as a Target Screen? I know it's possible for 27 so there must be a hack or terminal command line that I can enter to achieve this.
View 2 Replies View RelatedThe screen randomly turns black without any major reasons. It doesn't seem to be a sleep mode/screen saver thing as the music continues to play on. I can adjust the volume or pause the music with the keyboard but the screen just won't turn back on. I have to shut it down using the power button and it happened several time the last couple days. Anyone else experience the same thing and got a solution?
View 4 Replies View RelatedA few months ago, i noticed what looked like a streak across the screen, but it wasnt on the outside, it was on the under side of the glass. Now, the streak is very visible esp in natural lighting. Its not noticable at night, because the screen light shines through it making it invisible.
It looks like dust? But im not 100% sure, but it has a directional pattern which leads me to believe its being causes by the inner fans of the system, and that there are some gaps where the air flow is constant. Also, the streak is in the upper left hand corner mostly (no where on the bottom poritions). Im assuming that the place holder at the top-backside of the iMac, for the exhaust fans to expell the heat from within, is what is causing this air flow.
I have a 27" iMac. Just recently, the screen has begun to randomly shut off. I then have to squeeze the power button, followed by a click of the mouse. This will bring me back to my password screen. Sometimes, that would be it, other times, it will do it repeatedly, for no reason, and then settle down.
Just for those of you who are bound to ask me about my Energy saving settings: Computer to sleep – Never. Display to sleep – 15 min.
It seems to me that this could be a hardware issue, but just incase any of you have had any experience of something similar, I thought I would ask.
Info:
iMac, OS X Mavericks (10.9.3), 27: iMac 2.7GHz Core i5
I have an inch wide white stripe that runs from the top to the bottom of my screen. This is on an Imac. The cursor disappears when going through it but pops out on the other side. It doesn't move but I can drag my window back and forth to view the part the stripe covers.
Any ideas or should I locate a local mac repair person?
How do I turn off Ichat on my IMac 21.5 inch screen? Whenever I turn on the computer, the ichat screen just pops open all of a sudden?
Info:
iMac, Mac OS X 19.9 Mavericks
The new 27-inch iMac uses up to 365W vs 280W for the old 24-inch! (going by Apple's published max. power consumption numbers. I doubt they would lie because it isn't exactly favourable for them to put in falsely high numbers in an environmental report).
That means there's some extra beef behind the extra components. Perhaps the ATI 4670 is a bit overclocked and the 4850 runs a bit faster than the old iMacs? Admittedly that 2.8 GHz i7 is going to suck a fair bit of power - the recent 2.8 GHz i7 860 model runs at a 95W TDP, however, the quad core iMac isn't available until November. So it won't be using the i7 860, and my guess it is using another custom processor, something a bit more power efficient, somewhere in between the 55W TDP of the old iMacs and the 95W TDP of the i7 860.
The difference between the power consumption of the two computers is 85W. The old iMac had a 24-watt digital amplifier, this new one has two 17-watt amplifiers. That brings the delta down to 75W. Say the iMac's i7 processor has an 80W TDP. That now brings the delta down to 50W. The new display likely wouldn't increase power consumption because of the LED backlight.
I'm not sure if I'm missing much (OK, two extra RAM chips may use another few watts), but there is still a fairly massive 50W unaccounted for.
Just a bit of fat to chew on
Does anyone know if the panel used in Apples 24 inch Cinema display is the same as the 24 inch iMac?
View 3 Replies View RelatedHello everyone, I'm currently looking to buy a 27 inch imac and can't decide whether to get a base i3 27 inch or a refurbished i5 quad core 27 inch. With the i3 I can get the student discount and qualify for the ipod, but the i5 is 23% off right now. Which should I get? Also is there a benefit of getting a 5 series graphics card over a 4 series graphics card?
View 4 Replies View RelatedI've got two iMacs in my posession currently from getting replacement machines. Both have screen issues as follows: iMac A - dead & stuck pixels, feint grey horizontal bar running along bottom portion of screen, bottom left corner has noticeable backlight bleed. iMac B - dead & stuck pixels, yellow tinge in bottom portion of screen. So here are my questions. Which iMac should I keep and submit for repair? (does it matter and why or why not?) How does the actual repair get done? For example, if I submit iMac B for repair, could I end up with a grey bar or backlight prob like in iMac A?
Are there multiple layers to the display when they fix specific issues? For example, let's say the dead pixels are on one layer while the yellow tinge is on a different layer, or are both issues on the same layer? I ask because if there are two or more separate layers, there is more of a chance to mess up so I may want to submit the iMac that has the least amount of issues.
Lastly and most importantly, has anyone submitted their iMac for screen repair for these issues and got it back 100% repaired? (no dead/stuck pixels, yellowing, grey bar, backlght bleed) These are #4 and #5 in terms of the number of replacements I've gotten now and I'm sick of it so I may opt to go for repair on either of these existing machines instead of going for replacement #6. But do you think a 6th replacement would be better than going for repair on either of these? Or not?
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View RelatedI got a MacBook Pro back in April, my first Mac.
I love it so much. I'm really into video editing and HD video, but the problem is that my MBP is running out of harddrive space, and I'm longing for a bigger display and a better processor. (I have the 13" C2D). I'm going to pick up an iMac this Spring. But I wanted to know if I should stick to the Core i3 21.5, or spend more and go for the 27 inch.
Is the new 27 inch cinema display any different the the displays on the 27 inch iMac??
View 4 Replies View RelatedI am trying to decide which of these two 27 inch imacs I should buy:
27 inch 3.06 core 2 duo model
27 inch 3.2 I3 model
Is the 27 inch 3.2 ghz I3 model a better value in terms of increased computer and graphics performance and is it better to get the 2nd generation model because of prior issues (i.e. yellow tinge)?
I bought a used iMac G3 last week and everything is in working order, save for one thing. The right side of the display has a sort of faint yellow tint to it. The tint goes away on the right side of any window, menu, picture, text when in the area. It was doing this with OS 9.1 when I got it. I've since upgraded to Tiger (with proper firmware), and the problem persists. I don't think it's a magnetic issue, since it happens regardless of where the iMac is in the room. I've also played with the display options. It's still very much usable, just slightly annoying. A screenshot wouldn't show the tint, and my camera had it kind of blurry, so here's a crude mockup of what I'm experiencing: I don't know if I should toggle or tweak one of the ray guns inside, or what.
View 6 Replies View RelatedI have a 12inch Powerbook (1.5ghz, 1.25gb ram, 80gb hdd) Recent apple updates have
a) killed my bluetooth, I can't get it back and no amount of reinstalls or old versions of osx will fix it.
b) this is the one that's really got me:
MY TRACKPAD NOW BEHAVES BADLY! By badly I mean it accelerates movement at ridiculous rates making it very hard to point at anything. If anyone has any suggestions at all about how to fix the trackpad
i need help its been freezing i have no idea and its annoying.
View 7 Replies View RelatedI was just wondering if the iMac G5's (the late 2005 models, last ones without isight i think) can support using a VGA/DVI monitor as a proper spanned second display with something like screen spanning doctor that works on the old iBooks, rather than just mirroring whatever is on the iMac display.
View 3 Replies View RelatedCan someone confirm if an Imac G5 will display on a second screen from startup or does the OSX have to complete the boot process before the second display will work.
View 2 Replies View RelatedI was wondering about touch screens for older iMac G4s. I don't know if anyone has ever done this but I'd like to put one of the older iMac G4s in the kitchen and would love for it to have a touchscreen. I've heard of people using the Wacom tablets behind the LCD screens in iBooks/Macbooks to make them tablet PCs. Would this idea work in the iMac?
I can't find anything on google, at least on the first 4 pages .
what i intend to do is have my imac g5 and my peecee (pc ) on the same desk, but of course i cannot use the imac display, so i will use an extra display and use a KVM switch, my question is; Will the extra screen need to be the same resolution as the imac using ssd?
View 4 Replies View Related