I'm thinking about getting a Mac Pro tower from apple, and then buying two 500gb hard drives to place them in a raid 0 config. My question is, is setting up raid as easy as taking out the existing hard drive, placing both the new drives into the mac pro, and selecting raid 0 from OSX when I reinstall the operating system?? Or does the Mac have something similar to a Bios setup where I select that?
View 24 RepliesI just got a brand new MAC PRO desktop. It came with a 600GB HDD. I purchased a second identical internal 600GB HDD. I wanted to do setup a RAID 1 using these 2 drives. Currently the main drive has the OS and all my other apps installed. I installed the 2nd drive and was fooling with disk utility. I'm not sure how to set this up however. I tried numerous guides online but I just cant figure it out.
MAC PRO (takes up to 4 internal drives) - currently installed 2 identical drives
Leopard
Using Disk utility
The RAID tab says "online" and the status is green (indicating the RAID is working). However on my desktop i see the 2nd hardddrive mounted with no contents in it. I just want to able to use the 2nd drive as a mirror so this way if one fails I'm still up and running.
I currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.
Some details about my setup:
Mac OS X 10.5.6
PowerPc G5
Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.
So I have a Mac Pro with Bay 1 acting as my regular start up drive. I also have three other Western Digital 500GB hard drives that I have been using as a RAID backup system. However, when I place all three of the RAID hard drives into Bays 2, 3, and 4, the computer will not boot. It never reaches the Apple logo, and continually tries to restart. So I figured one of the hard drives was corrupt.
However, I have tested all three hard drives in Bay 2 and the computer will boot just fine. I have also tested each bay individually (i.e. the same RAID hard drive in each of the Bays seperately) and the computer still boots fine. I can even power up with any two hard drives in Bays 2 and 3. The only time I can't power up is when all three of the hard drives are occupying all three of the extra bays.
Also, none of the RAID hard drives show up in Disk Utility or on the desktop. Shouldn't I be able to view them as normal internal or external hard drives being plugged into my Mac? They do show up in RAID Utility. Is this normal with RAID hard drives, or should they always show up in Disk Utility?
I created a new RAID backup with two of the drives together (Bays 2 and 3) and it recognizes it in System profiler. However, I want to be able to use all three drives for the RAID.
Info:
Mac Pro, Mac OS X (10.6.8)
What is, in theory, the fastest raid type, when I use two hard drives.
View 3 Replies View RelatedI have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
View 10 Replies View RelatedI have a Mac Pro with all hard drive slots filled. The first two disks (includes startup disk) are independent, and 3 and 4 are set up in a RAID 1 mirror. I have to take my computer into the Apple store for a repair and I'd like to just take out all the disks except for my startup disk... however I'm not sure how to go about doing so for the RAID. If I take the drives out, and boot up the computer with them no longer inside, will the computer "freak out" and/or will the computer no longer recognize the RAID if I put them back in again later?
If the latter is the case, will the data be lost or would I just have to set up the RAID again... and if I do that, will that also cause the data on the drives to be lost, or is it possible for it to mirror them again without needing to make changes to the data?
What should I be doing to my drives before building arrays with them?
Hitachi do a Drive Fitness Test and Seagate something similar but I have not been able to get either to work on a BootCamp Windows partition.
I tried formatting in Disk Utility and pulling some data on and off. I'm now running a scan for bad blocks in Drive Genius (is this worth it? It's going to take about a week at this rate). Anything else I should do?
I have been reading about people taking a SSD drive for Boot and OS and using a second HD for their data using MCE's Optibay hard drive enclosure.
I would love to go this way but I can't justify spending all the cash on a SSD yet. Could I put in 2 500GB 7200 rpm drives and RAID 0 them? I know this wont be as fast as SSD but it should be faster than a single hard drive and hold a lot more storage for less $$$.
I just got a used mac pro quad. I plan to use it for video production- final cut pro, pics - aperture, and music production- protools. THe computer came with 3 - 10k rpm 160g hd's. Two of them are set up as a raid 0. I like the idea of having a faster drive as a boot drive, but 160 seems kind of small to me as the drive to run memory hungry apps and the operating system. Am I right? I could go to a 300g 10k rpm drive. I am also thinking about getting a bigger drive, say a 750g or 1 tb 7200 rpm. Should I use this as the boot drive or as a secondary storage drive?. If it's the boot drive should I add the other 160g 10k drive to the raid or keep it separate? I assume that neither way would be wrong, nor create a problem, but since I haven't put anything on it yet, I'm wondering what would be the most efficient way to manage my files and get the most out of my computer.
View 16 Replies View RelatedSince upgrading to Mac OS X 10.7.4 I am unable to mount any of my G-Tech Raid hard drives.
Info:
iMac, Mac OS X (10.7.4)
I have an (Early 2008) Mac Pro in standard configuration. The hard drive is just about full and would like to add a second internal hard drive.
I have read that some people choose to keep just the OS on one hard drive and everything else on the drive. Is this the best way to go? Which hard drive would the applications go on (with the OS?)?
The main use of this machine is for graphics (Adobe CS3 and Aperture).
I don't suppose any clever person knows if it's possible to access the BIOS setup screen on windows XP? I've been told it usually comes about by pressing/holding the "delete" key whilst windows is loading. However, I can't seem to get it to appear on the Macbook pro whilst I load. I need to disable hyperthreading in the BIOS to get something to work, and this seems to be the way to do it.
View 6 Replies View RelatedI have a macbook air, I'm trying to use my airport extreme with a 1 tb hard drive plugged in over my network to store my iTunes etc i change the preferences but it always seems to forget it when the laptop is turned of..
Info:
MacBook Air, Mac OS X (10.7.3), using 3rd gen airport extreme
I have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
My brother is going to start school in June for Film. He is all set to buy a Mac and knows the software side of things but not so much the Hardware side.
I have a few questions:
1. Should extra hard drives be bought third party?
2. Should he do a raid setup for backups?
3. How much memory should he buy for Final Cut operations? (third party)
4. Should he look into getting a Dell monitor instead of Apple? What is a comparable Dell monitor?
5. 4-Core or 8-Core?
6. Any other knowledgeable Mac Pro buying advice
I have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
I have a MBP (see signature) and two Freecom 500GB USB external Hard Discs. Is it possible to somehow set up these two HDDs in a RAID 1 configuration under OS X. The reason for this is that right now I have a large collections of films on the one of the HDD and would hate to loose them all if the disc failed.
View 1 Replies View RelatedI have 2 1TB drives coming in on Monday, and I plan to put them in a mirror RAID using Disk Utility. How reliable is the OS X software RAID setup? Would I be better to just manually backup from one drive to another? The drives will be for my photography, I wanted a mirror setup so I'd finally have a backup of my (current) 250GB's of photos. (Most of which I could probably burn to DVD's but humor me.)
If the RAID crashed somehow via the software, would the data still be recoverable? I have a MP and will be putting them in Bays 3 & 4. Also, is there any benefit to the different block sizes? Since my files will all be at least 7MB would the biggest block size speed it up?
I'm planning to setup a RAID on My Mac Pro (2006 2.66 Quad Core). I know Bootcamp not support Hardware Raid Card. Can I use the Hardware Raid Card for boot Mac OS X and storage Data, and use the onboard controller boot the Bootcamp Drive?
View 6 Replies View Relatedthis is what im currently goin with.. SSD as boot/apps and a 1TB for data.. but a couple people suggest 1TB drives in raid.. 1. what do I need for raid?
2. how does it compare against the SSD+1TB setup? 3. can I add raid to the SSD+1TB and get more 1TB drives later?
The time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I'm dying to retrieve my info from my old HDD in my MBP but I keep getting all sorts of ideas/advice about the info on the HDD won't be retrievable if there's a BIOS/Firmware password there.... My main focus and concern is all my mp3, avi, jpg, Jpeg files; I care zero for the programs cause I can always get them back...
Info:
MacBook Pro, Mac OS X (10.6.6)
Basically this would create a big 4 gig array that I could split into multiple partitions. I'd have mirroring and fast performance. I was wondering what the performance difference would be between the Greens and Blacks - Greens are known for worse performance, but I was wondering if in RAID 10 it would even matter.
View 11 Replies View RelatedI have a PowerMac G4 I'd like to use as an "experimental" backup machine. I am looking to try and make a RAID setup in it, and I'm no expert with that. I'm wondering if this is even possible, first. I'm also wondering if I can do this with 2 40 gb drives and a 20 gb drive. I want to make it so it appears as 1 drive. I'd be using tiger and a software RAID if that is of any relevance.
Specs:
500 MHz PowerPC G4
640 MB SDRAM
No hard drives currently
Setting up raid 0 for my mac pro 3,1. Right now I have the stock 320GB drive that I use with Mac OS X, and an additional 500GB drive running Win XP through Bootcamp. I read on apple's site that you could stripe multiple drives to create a raid 0 to increase performance on the Mac Pro w/o the raid controller card. So my question is how do I do that? I'm in the process of picking a new 2TB drive to set up the raid with the 320GB OS drive. Since the 500GB one is dedicated for XP I don't think I could include it in the raid right?
View 10 Replies View RelatedI bought this Hard drive under the impression that its going to be easy install. I went through the manual steps to install all went ok to last step which is partition and format using Disk Utility. now i dont know what to do, is the hard drive going to do the Raiding, or I have to setup using Raid tap in Disk Utility? I tried doing Raiding using Disk Utility but couldnt do it, i thought maybe i cant because its hardware raid or
i searched until my head exploded, and I feel its easy but i am not getting something tiny here.
I just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.
View 2 Replies View RelatedI'm about to configure my 2006 MP with one of Apple's RAID cards using RAID5. I currently have 4x 750GB drives that I can use, but I can see needing more space in the not too distant future. When I do need more space, can I simply drop in a 2TB drive, let the RAID system reconfigure itself, and repeat this until I have all 4 drives in place? Is there a better or different way to do this? I know that if one of the drives is larger than the others, then only a drive space equivalent to the smaller drives will be used in RAID5. After addition of the fourth drive (per the above scheme), will the array then use the full 2TB of each drive?
View 7 Replies View RelatedI wonder if anyone can give me the basic steps to setting up a RAID array on a Powermac G4 (I think I mean a Raid 0 ie one extra hard drive).I have looked up a couple of articles but they advise to use the original install disc during the set up process. Unfortunately I don't have the original install disc. I have available one extra internal hard drive and one external hard drive.
I would like to set it up so that there are two internal hard drives with one replicating to the other one.
