I just installed New RAM that i bought on Newegg. It said it was the right kind of RAM for my PM G5 dual 1.8
Installed it and got the three blinking light thing. Which i guess means bad RAM.
Took it out, and put my old (working one minute ago RAM) back in....still getting the 3 blinking lights.
I was waiting a lot for the update of the new Mac OS X Leopard, because blogs said that it was a very good update with a lot of impovements.
But after the update installed, my Mac restarted twice, and it stayed for ever in the gray page with the Apple and the little circle rotating on the bottom.
It never turned on. I sent it to see if they can fix it and if they can recover all my information. I'm still waiting.
If someone has any information about this issue please let me know.
What in the world is Apple doing lately? One ****** up after another... Aperture 3.1 won't open. It crashes every single time. I repaired the permissions, deletede the preferences and nothing!
View 4 Replies View RelatedThe 10.5.4 update appears to have killed my MBA. On boot I either get a grey box in the middle of the screen in four languages telling me I need to restart my computer, or I get a blank pale blue screen. I left it on the pale blue screen overnight but it never moved on from there...
Have everything backed up on Time Capsule, but I'm new to Macs, so can you advise on next steps, how I would go about getting my MBA to a state where I can restore from backup, etc?
Pointers to apple support sites welcome but I'm on my iPhone so searching isn't great.
There is a process, "PocketCloudService" that I cannot finish even from terminal (kill PID), the response is "Operation not permitted". I did the same of killing proceses from terminal and it worked, but it doesn't with this process. It belonged to a program that I unistalled, "Pocket Cloud". I reinstalled that program and unistalled again, but the process continues running, even if I restart the mac. It's annoying because sometimes it spends about 80% CPU, warming my mac (and my patience!), therefore I finish the process "PocketCloudService" from Activity Monitor, but it restarts few seconds after. I just want to delete or block the source that launches that process and not have to stop it manually anymore.From activity monitor when I check the process, the main process is "launchd (1)", user: root (0)
Info:
Mac Pro, Mac OS X (10.6.8)
I got time capsule for Xmas and I tried installing it today and I popped in the disk and installed it, which went alright. Now when I tried to set up my time capsule, it seems to have disabled my Wi-Fi network, even though it appears a strong connection, it just doesn't bring up my Internet anymore, even when I try to surf on my iPhone with Wi-Fi, it still doesn't work, so I am using my 3G network now.Also, can I not use time capsule to expand my hard-drive for more space on my operating system? I need more space, that's what I heard time capsule can do, in conjunction with backing up old files too.
View 1 Replies View RelatedI just had a unique OSX experience (for me, at least). An application became unresponsive, so I tried to force-quit it from the Dock. It would not quit. Then I tried to tried it from the force-quit dialog. Nothing. Then I opened the Activity Monitor and tried to quit the process. Again, the application window sat open. Then I pulled out my last trick and attempted to kill the process in Terminal. To my amazement, it just sat there. I tried to shut down, but it timed-out. In the end, I had to shut the Mac down with the power button, the first time in years that I've had to do this. Otherwise, OSX (10.4.7) seemed to be working fine -- I was able to quit all my other running application in an orderly fashion before shutting down.
View 6 Replies View RelatedHas anyone had any issue with their external Iomega Rev 35 drives not working after the 10.5.6 update? I did the update correctly and then a couple days later did my normal weekly backup across firewire to the Rev drive - done this for a year. But this time after transferring it went dumb and wouldn't eject. Here's the chain of events:
1. I successfully updated my MacBook Pro to 10.5.6 from 10.5.5.
2. Two days later I connected my firewire Rev35 to my Mac to transfer some files as I do weekly.
3. After successfully transferring the files the drive would not eject the disk using the button or the menu eject. And the drive's activity light/button was now slowly blinking.
4. Consulted the help files and they said a slow blinking light meant the drive needed to be reset, and that was accomplished by unplugging from power and plugging back in.
5. I unplugged and plugged back in using both firewire power and wall power - no change.
6. Then I pulled out my USB Rev 35 I have and plugged it into the Mac and transferred the files to a different disk.
7. After transferring the files that drive did the exact same thing.
Since these external drives appear as a CD/DVD (I think) perhaps it's a problem with ending the write session or something like that.
My iTunes has started to crash after a period of time (often when I haven't done anything) and, when it happens, I can't kill it using Force Quit, killall, kill -9 or even sudo kill - I end up with a zombie process which stops the machine from rebooting.
The library is stored on a 1TB drive in a Power Mac G4, connected with a SATA card. It streams from there to an Apple TV in the lounge.
I've tried repairing permissions and even taking out the RAID setup so that it's now just on a single drive, but no dice.
Installed Lion successfully on my 2007 MacBook Pro. First run went OK. Tried restarting and won't boot. No Chime... nothing. SMC reset and PRAM reset don't do anything. Sleep light comes on for split second, optical disk engages momentarily, then all goes dead. Screen stays black. Attempted start without RAM seems to indicate logic board is working. Getting repeating tones. Flashing light when I press and hold power is the most I can get with the memory installed.
Info:
MacBook Pro, Mac OS X (10.7.4), 2007 MacBook Pro - 4 GB RAM
this is more of a very open ended question to see if anyone knows an answer, but I just uploaded snow leopard onto my mbp (early09) and all is great until I try and connect to my wifi, which it does but at the same time brings down the whole system so no computer can connect to the Internet the only way to fix it is to reset the wireless modem and turn off airport on the mbp. does anyone know why this might happen like hardware compitablity or is it a glitch other people are having ?
View 14 Replies View RelatedIt was working before update. Now updated it doesn't connect in iTunes. Any ideas?? I've restarted the Airport Express with no luck.
Can someone test this?
After my intel iMac froze when running Snow Leopard, I was forced to restart it, and it turned out the HD was corrupted. But after erasing it and performing repair disk, everything is now ok. But since the failure it refuses to reinstall usually giving the message "an error occured when intalling Mac OS X"
For the last few, very frustrating days, I've tried everything I have read on the net: resetting PRAM, checking the HD is set as GUID, erasing and repairing the HD numeous times, performing hardware tests. Even slaughtering farm yard animals. Basically everything. And still it won't install.
I really am at my wits end, and to make matters worse, the genius bar here in Tokyo is so busy I can't get a reservation til Friday evening.
Got a 3 year old macbook (OSX 10.5) that runs Windows XP (SP2) off a partition on the HD. Booted up in windows and was downloading two files via Bittorret when it gave me a cyclic redundency check. With a quick look, got some advice to stop using your computer, youre harddrive is failing. So i shut down.
Problem is... I can't bootup again. I just want to get a few personal files before i say goodbye. But i can't boot back up in OSX or XP. And it doesn't sound like the drive is physically failing either. No clicks, no loud spinning, just regular harddrive noise.
I've also tried connecting it as a USB to my GF's teeny weeny cutie EeePC. It will recognize the Windows partition and take forever to map out whats on there, but it won't recognize my Mac portion of the HD (which is where I would like to get my files from).
So because of this whole bootcamp mixup with my Mac,I can't access nothing of importantance (all on my macpartition). Windows won't boot, Mac won't boot, and I can't get anything off the Mac portion cause windows won't see the Partition.
After using Open Firmware Update my G4 went into a crazy circle. At first, it was impossible to start up, and when it was possible, just for a couple of seconds, and then the translucent screen asking you to restart the computer pressing for a few seconds the start up button.
Info:
Quadra 605, G4 Desktop, IMac 500, eMac, iMac G5 PPC, iMac G5 Intel, Mac OS X (10.5.7)
I'm on a newer iMac running Yosemite and went to install ilife 09, to get iDVD (that I need) and somehow it killed iphoto? The ap wont even open. I opted for the custom install and thought everything went fine (only selected iDvd, but I have no iphoto.. I'm downloading it from the ap store now, My question is this, I purchased ilife 09 and ilife 11. This shouldnt be a problem should it? I should do the custom install on 09 (opting only for iDvd) then do the same for 11 right?
Info:
iPhone 5s, iOS 7.1.2
Upgraded to SL on Friday evening and so far it seems to be working great. However, both my Cisco VPN Client and my Remote Desktop now refuse to run.
With Cisco I get: Error 51 Unable to communicate with the VPN subsytem
Remote Desktop: Remote Desktop Quit Unexpectedly.
really need these 2 applications to log into my office computer while I'm at home.
I've just tried to mess around with some stuff in iTunes so i can sync my iPhone on both of my Macs. I did it all as instructed but when I opened the window was huge, and I can't make it any smaller. It's like a copy of my iTunes on my 24" iMac.
I tried deleting everything iTunes related and reinstalling but still the same.
Anyone got any solutions as to how to have a COMPLETELY clean version of itunes, or how to make the window smaller?
Yesterday I bought the Leopard install disc and loaded it up. When I tried to install 10.5.6, the installer told me that I couldn't install that version on my hard drive. I assumed it was because I only had 1 gb free, so I quit the installer and restarted so that I could free up some space. That's when the problem began. The gray startup screen came on, but then the little circle icon just spun and spun for a few minutes, then the mac shut down. I looked up some solutions on another machine. I tried selecting a startup disc, zapping the pram, etc. No good.
I started in verbose mode and it said something about an invalid sibling pair, and the last command I saw was something like 'CPU end'. I ran the disc utility from the OS X system disc, and it was unable to verify the drive. So what the heck did the OS X installer do to my hard drive? Did it corrupt the catalog? I quit the installer, so it shouldn't have touched it. (The worst part is that my super duper smart update wasn't working properly, so I need to get the data off that hard drive or I lose 2 years of work).
I put snow leopard on my mac this afternoon and have been kicking the tires. I ran Parallels 4.0 and the windows worked just fine with my XP Partition. When I tried to boot it up in boot camp however, I got an error telling me it couldn't load windows.
I imagine this is an issue with the drivers, but I can't figure out where the drivers are and how to get them on the windows side.
When I open windows in parallels, I can't find any drivers to load on the DVD for snow leopard's boot camp.
Problem is pretty much summarized in the topic line. Had a distnoted process that was eating up all my CPU. Killed it in Activity Monitor, and the computer hung. Forced a restart, and it won't...restart. Tried a safe reboot, resetting the NRAM...no joy.
2012 (I believe) iMac running the latest version of OS X Mavericks.
Adding to Security Update woes. Appleworks quits and quits and quits, always when Print command given. Printer works fine for Text Edit and Mail,
View 7 Replies View RelatedI have a Dual 1.8 GHz PowerPC G5 with 2.5 GB of RAM. My fan starts revving really loud when I am using multiple apps (Adobe CS2, Firefox, iTunes) and while watching a video tutorial or AVI movie (both saved on my desktop). It also happens when I am just watching a AVI movie with no other apps open.
I just added one GB of RAM yesterday thinking maybe this will solve the problem since I am running multiple apps. This did not resolve it. So I searched the messageboard for threads on fan issues similar to mine. I read it may be caused by the tempature in my room. I keep the tower on my floor on top of 2 pieces of wood about a 1/2 inch thick. I live in a small brick studio apartment so the tempature is usaully between 60 to 70 degrees.
I looked into smcfancontrol but it looks like its for laptops only.I also do not have a utilities program for my computer yet. I was wondering what was the best program out there to clean up/tune-up my hard drive so its running at maxium speed.Has anyone had experince with this issue and have any answers? I am concerned this may be very detrimental to my computer in the long run.
I'd like to buy a LaCinema Classic Multimedia Player 500GB for my G4 400MHz (sawtooth).
[URL]In LaCie website says that a system requirement for LaCinema is a 500MHz processor or greater...
Do you believe that it will work in my 400Mhz PowerPC?
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
I've heard that G5s (especially dual-core/processor) really fly with 4 Gb RAM. Does anyone have one with this much RAM? If so, is it really worth the upgrade? I have dual-core G5 with 3.5 Gb RAM. It's great, but I do think it feels a bit choked at times. I would like to give it another Gig.
View 24 Replies View RelatedI run a Mac G5 PowerPC, OS X 10.4.11.
I see here that it says it's compatible with the 4.3 version of Vuse (PowerPC and OS version), but on their website, is says "for Intel". I would really like to know what is right here. Does it also support PowerPC or not? . What version of Vuse should I use, with satisfaction, if any? My computer has been acting up and I am trying to figure out why. That might be a cause. I would be very grateful for such information, to keep my mac in good shape and also enjoy Vuse.
And if Vuse isn't the answer for my mac, what would be ?
Powerbook G4 running on Mac OS X 10.4 but iTunes 10 suitable for new iPods and as PowerBook G4 quite slow running on Leopard so I am using on Mac OS X 10.4.
View 4 Replies View RelatedI have a few questions about upgrading my mac in order to use the new iPod touch 4th gen (requires 10.5 or later).
First, here's what I'm working with:
I have a PPC G4, dual processor 1.25 GHZ, 80GB HD, 768mb RAM, running Tiger 10.4.11. I use CS2 for freelance graphic design (and very occasionally Quark 4 on OS 9). I have 2 external hard drives backing up my system, storing personal files, photos, music, etc. Yes, I've got an oldie, but it's been cranking out loyally over the years with tune ups and TLC, and I need it to live on a while longer.
1. Can I upgrade to Leopard 10.5 (not snow leopard) and still use my CS2 programs? From what little information I've been able to find, the answer is most likely yes, but with quirks and decreased speed... which I can deal with. I simply cannot afford a new mac (nor the software upgrades required once that happens), so I need to work with what I've got.
If the answer is yes, then...
2) are there any other updates in between 10.4.11 and 10.5 that I will have to purchase before upgrading to 10.5?
3) Also, since I will have to upgrade to a minimum 1GB RAM, can anyone please suggest a good site to buy it from? There seems to be a million options out there. I know that I should really have more RAM anyhow with what software I am using.
I have a power mac g5 its a few years old and I'm having trouble installing OS 10.5 leopard. When I turn on the computer i get a blinking ? folder that alternates showing a ? and a mac face, with a gray background. I tried putting in the start up disk (? folder doesn't appear with the start up disk) and it guides me through the installation steps, but it doesn't display a location to install the OS on. I also tried putting an external HD in and this does not appear as well. So, I went to disk utility and tried the figure out the problem. In disk utility, the internal hard drive is there, but not the external HD. I also tried switching Hard drive ports from a to b and this made no difference.
View 11 Replies View Related