PowerPC :: Largest Possible Hard Drive For Bronze Keyboard
Jan 1, 2011
I am reassembling a PowerBook G3 Bronze Keyboard. I think I have everything I need.but I don't know if I have the correct hard drive. Will an 80gb hard drive work?? because I thought that they are only capable of 6gb hard drives, or is that the default controller for the Blue & White Power Macintosh Desktop?? And also am I correct in thinking that if this hard drive will work for this Bronze Keyboard, I will have to partition it for every OS I have on it. ?? Because the operating system has to be in the first 10gb of the volume, or the files might become "lost" and the operating system unusable?
View 3 Replies
ADVERTISEMENT
Oct 20, 2007
What is the largest GB hard drive (internal) that I can use with an iMac G4 700 MHz?
View 1 Replies
View Related
Nov 29, 2007
I'm looking to put a hard drive in G4 PowerMac 867Mhz. The machine would have been bought circa 2003.It's running OS X Server 10.2.I'm looking at a 300Gb hard drive.
View 5 Replies
View Related
Feb 13, 2008
I have an old PowerMac G4 7400 (450 Mhz) and I'd like to use it to replace an old Micron PC I'm using as a file server. My question is, what is the largest size HD I can install in it? I checked Mactracker and it said it only supported up to 128 GB per drive. But I didn't know if this was related to the OS at the time or whether it was a hardward limitation. If I'm running Tiger on it would it support a larger 500GB drive? If it is a hardware limitation I guess I could always add a couple external firewire drives. Let me know if this should have been posted in the "collectible forum".
View 4 Replies
View Related
Oct 31, 2010
what's the largest capacity hard drive my macbook pr 15" i5 can support ?
could you guys also please get me some links ? preferably from Amazon
View 10 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies
View Related
Apr 6, 2008
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
View 3 Replies
View Related
Jan 7, 2010
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies
View Related
Apr 8, 2010
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
View 8 Replies
View Related
Sep 4, 2014
I have a macbook pro with a water damaged keyboard that I am selling for parts. I need to know if there is anyway to delete all of content and or format the HD without the use of an apple keyboard. I have a cheap external keyboard i am using that does not have the apple command and options key.
Info:
MacBook Pro
View 1 Replies
View Related
Aug 13, 2010
I'm using synergy right now with my PC as the server and I can't get the MDD optical drive to open.
View 6 Replies
View Related
Sep 15, 2008
every once and a while, when I am working on my MBA, i get a loud "ticking noise" in the upper right of my keyboard.It sounds like the harddrive is trying to think or something, but it only happens for about 5 seconds and it occurs even at idle if i dont do anything that requires the computer to use memory or access the cache, etc...
View 10 Replies
View Related
Dec 26, 2010
i purchased a power mac G5 recently which broke after 2 days- it was bought from ebay. i sent it back to the seller who "repaired" it. It arrived today in the post and didnt work i oppend it up to see the hard drive had crack during transport, and the conector pins where bent and unconectable.
I made a clone copy of my macbook that should be bootable using something called carbon copy cloner, i now want to boot my power mac g5 from the external usb hard drive. This just apears on the screen with a folder and a question mark flashing. What can i do or is this possible.
View 7 Replies
View Related
Aug 21, 2007
I'm in a little need of assistance with my PowerBook G4 Alum. 1.67GHz. The Hard Drive it came with got fried a little while back (alas, not in warranty) and I have been hesitant to try to repair it myself in the past. However, I now wish to resurrect my machine, seeing as how if I don't try this, I might as well just buy a new laptop. What sort of HD should I buy?
I know it has to be "ATA" but (1) I have no idea what that means, and (2) There seem to be many different types of HDs. I have no problem disassembling my PowerBook but I am lost when it comes to its hard drive. I think I would like to get a HD with 7200 rpm and 80-100 GB. Also, when do you see Apple releasing a MacBook with a good graphics card that isn't integrated?
View 13 Replies
View Related
Aug 24, 2007
My hard drive just failed in my 12" PowerBook G4 1.3Ghz. I wondering if any one can confirm whether this disc would fit/work [URL]
View 1 Replies
View Related
Jan 11, 2008
I have a 40gb drive and i want to get a bigger one? What will fit and work. Will this? [URL]
View 8 Replies
View Related
Apr 16, 2009
I have tried troubleshooting, searching this forum, & googling to no avail. I'm hoping someone smarter than me can figure this out.
Short Version:
Purchased this hard drive:
[URL]
and purchased this external enclosure:
[URL]
when I plug it into my macbook, PC, or a powerbook, the disk is not recgonized, I can not get Disk Utility to even recognize that the hard drive exists. I thought it may be a bad drive, so I sent it in to Seagate Warrenty, they sent me a new one and I'm still having the same problem. Does anyone know how I can format the drive or any way I can get it to be recognized?
Longer Version:
My powerbook crashed, so I purchased this HD to replace it. I installed the 1st seagate and when i went to install OSX and said select destination drive, there was none there to select. I was able to repair the original HD so I reinstalled it and went to install OSX and it DID show the drive to install it on, so I don't think that it is the computer/motherboard. Then I sent in for the 2nd seagate, tried getting it to work with the external enclosure and installing internally in the powerbook, etc. nothing seemed to work.
I am wanting to install the new drive in the powerbook as the old drive is on its last leg (but currently works). Every thread i have searched for that was similar, there was no solution that I could use.
View 13 Replies
View Related
Jun 20, 2009
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions:
http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
View 12 Replies
View Related
Jun 24, 2010
I recently tried to switch drives to run the Operating System 10.4.6 on my 1st gen G5 1.8ghz. The new drive(160GBs) is smaller than the old system drive(1TB) so I ran a 3rd party app to clone what I thought was the important stuff onto the new drive; but not everything because it wouldn't all fit. I moved everything that looked like it wasn't just a dumb folder with my media files on it. It seemed like I moved everything important on the new drive.
When I swapped out the drives in the top bay and booted the computer, the new drive didnt boot the OS, instead it opened up a black screen that looked like some sort of terminal. I did something wrong and I cant figure out what. Does anyone have better steps to take? Its not the end of the world to start over, but if anyone knows what I did wrong that would be super information!
View 11 Replies
View Related
Sep 15, 2006
I was using my mom's 500 mhz G3 iBook circa 2k1, running 10.2.0 and it decided to start tweaking out on me. Being a somewhat aware computer person, I thought tat a simple restart would fix all of this. Shows you how much I know. Anyway, the boot-up screen showed the icon of the file with the question mark inside. Find the OS 9 CD that we have and I booted up through the CD. I finish starting up and, to my surprise, the drive appears to be erased- the computer asks me if I want to initialize the disk. I hit cancel and proceed to run the disk repair on the OS 9 CD. After it's done scanning, the the results are: "Missing Thread Record, 62078, 4260". What does it all mean? Will the computer be able to recover? What fate lies in store for the iBook?
View 3 Replies
View Related
Sep 22, 2006
Someone is selling me a powerbook, but I want to find out what the harddrive rpm speed is, they don't know what it is. Is there anyway to check using system profiler or something?
View 4 Replies
View Related
Oct 18, 2006
I need to add another hard drive to my dads Dual 1.0 PowerMac G4. how large of a hard drive can i add easily to this machine? its running Tiger.
View 8 Replies
View Related
Nov 25, 2006
I just recieved the G4 Cube from Flyinace2000, MR member of vast integrity and great packing skills.
I want to try to put a new hard drive in it before I boot it up to see if that will help things.
Where would I find a photo guide for Cubes and switching the HD?
View 2 Replies
View Related
Dec 26, 2006
I have trided to upgrade the hard drive on my G4 15" powerbook. The ribon conector from the drive to the board has come free from the board and I don't know how to refasten it.
View 2 Replies
View Related
Jan 30, 2007
I want to replace the hard drive of a rev A g5 imac and I see that currently it has a sata 1.5gb/s hard drive. Could I get away with getting a 3.0gb/s or is it incompatible? Specifically this one:[URL]
PS- I'm trying to find an enclosure that is firewire but will allow me to hook up the sata drive i take out. Do they really exist? I'm having the most difficult time.
View 13 Replies
View Related
Mar 11, 2007
I have a 12" PowerBook G4 that stopped recognizing the factory hard-drive some time back. I have a G4 iBook so I was not in a hurry to look into it. I removed the old hard-drive and replaced it with a Scorpio drive of 60GB. It still fails to recognize the hard-drive. If I run the Apple Care diagnostics it hangs at the start-up while 'scanning for volume' or something like that. t hangs for 15-minutes or more and never moves past. The CD-RW drive is fine as I can boot the machine into the OSX installer up to the point where it asks for a destination...at which point nothing is selectable. It is a 867MHz G4 PowerBook with 768MG RAM. This is a fantastic notebook and I would hate to see it remain in this state. Does anyone have any ideas? I replaced the IDE cable and hard-drive with all new Mac OEM parts (except the HD) and reset the PRAM or PMU or what ever it is called...with no results.
View 5 Replies
View Related
Mar 15, 2007
I have an ibook g4 1.2 ghz 14 inch model with the 60 gig HD runnig Os X. One day, it start freezing up, and when I restart it, it would be fine. However, after a couple of day, it would not longer boot and I would get the folder with finder and question mark. I ran the hardware test on the CD, and it said I had a mass storage error. So, I went and bought a new hd and put it in. (another hitachi one, exactly the same). So i boot it up, run the hard ware test and it is fine. Then I go about installing os x and stuff, and everything is fine. However, on my first restart a couple of hours later, my computer no longer boots up again. I run disk utility, and it does not see any Hard drives, and when i reattempt to install my os x, it can not find a destination folder. What is going on? Also, I have the old HD from my ibook that I put in my external Hd case. If this thing is not actully broken, can I use it to boot through the usb 2.0 drive on my mac? I tried to plug it in, but for some reason no power goes to it, but if i plug it to my desktop, it powers up. (the light on the case)
View 7 Replies
View Related
Jul 4, 2007
just got my first mac (a freebie):
iMac G3 Power PC 233
160MB RAM
OSX 10.3.9
Darwin 7.9.0
4GB HDD
the first two things i want to do are upgrade memory and hard drive. problem is i have none of the media the software came on. is there a way to transfer all apps (no data yet) to another HDD?
View 2 Replies
View Related
