PowerPC :: Hard Drive With 7200 RPM For G4
Aug 21, 2007
I'm in a little need of assistance with my PowerBook G4 Alum. 1.67GHz. The Hard Drive it came with got fried a little while back (alas, not in warranty) and I have been hesitant to try to repair it myself in the past. However, I now wish to resurrect my machine, seeing as how if I don't try this, I might as well just buy a new laptop. What sort of HD should I buy?
I know it has to be "ATA" but (1) I have no idea what that means, and (2) There seem to be many different types of HDs. I have no problem disassembling my PowerBook but I am lost when it comes to its hard drive. I think I would like to get a HD with 7200 rpm and 80-100 GB. Also, when do you see Apple releasing a MacBook with a good graphics card that isn't integrated?
View 13 Replies
ADVERTISEMENT
Jun 24, 2009
Has anyone tried the 500GB - 7200 PRM Seagate Drive for the Macbook Pro 15" Unibody ?I am considering getting one, but remembered they have 2 versions Which one should i get ?
View 3 Replies
View Related
Jun 22, 2009
I'm thinking of getting a refurb MBP but they come with a 5400rpm hard drive and I want a 7200rpm. Does anyone about how easy it is to replace the internal hard drive in a MBP and how much it would cost?
View 5 Replies
View Related
Jun 27, 2012
I am planning to buy the New 13inch MacBok Pro that came out this July. Is there a possibilty of upgrading the Hard drive to 7200 rpm like the way I did it in the old model. I have had news that its not possible to upgrade this machine as we did the previous one.
Info:
MacBook Pro, Mac OS X (10.7.1)
View 2 Replies
View Related
May 16, 2009
I just installed the 4G Ram easily but my next step is to install a bigger hard drive. I have the 120GB one. My question is when I install the new hard drive, do i start up the mac mini and load up the OSX restore disc that came in the box with the mini? I also installed iWork09, will I be able to install iWork09 in the new hard drive (i know the iWork09 only comes with 1 license key).
View 4 Replies
View Related
Nov 12, 2010
This is in regards to the 2010 mini. I have been reading up on SSD, Hybrids and FW800 with a 7200. What is the easiest AND most effective/cost effective solution? If I went he FW800 route, can I use the same drive as my data storage drive? Will there be enough headroom to run the OS over FW and use the drive to stream movies playing in another room on Apple TV2 simultaneously? Will this give me a performance increase over the internal 5400 if I use the external 7200 for everything over FW800?
That is where my thoughts about the hybrid come into play. I know I can stream the iTunes content over USB2, which I have at the moment for the big drive. I would need to go buy an enclosure with FW800 to run it as a boot drive. I could use that same money and go get a 500GB Hybrid drive and install myself and leave the USB2 as data only. If the install is painless but tedious, I might just do that. If the FW800 route would be robust enough to run the OS and stream data to other devices simultaneously (ie use it as I would the regular internal drive), I might just do that and wait for SSD prices to come tumbling down and do a bigger internal SSD in the future.
View 3 Replies
View Related
Dec 12, 2010
I'm looking at a MBP on CL and the seller has swapped out the HD and put in this WD Scorpio 320gb 7200 rpm HD. I'm wondering if any of you have this hard drive and can confirm it's quality or claim that it is of poor quality?
View 3 Replies
View Related
May 12, 2009
I had a MBP with a 7200 RPM, 320 GB Hitachi Hard drive. I sold the MBP and got a white nvidia MB, but I kept the 7200 RPM drive and used it in the white MB (I did not reinstall the OS). Everything works fine, but I've noticed that it takes a very long time to boot. From the time I turn the MB on, to the time the spinning disk appears, it takes approx. 60 seconds. Other than that, the MB works fine. Should I do a clean install of Leopard. Would this help the slow boot time?
View 5 Replies
View Related
Jan 8, 2009
I upgraded my Mac Book Pro hard drive to a Hitachi 7200RPM 300GB Hard Drive in November. All of a sudden my Hard drive is full and I cannot explain why. I retrieved the folder size info from the six folders I have on my HD and it claims that I have filled up roughly 100GB on the hard drive. I understand the MAC OS X is roughly 4-5GBs, roughly another 15GB for threading the utility files, so I should still have at least 180GB of space free on the hard drive. I recently downloaded the application known as AZUREUS aka VUZE could this app have put some extraordinarily large hidden folders on my hard drive? I deleted this app but my HD is still stating that I have used up 278GB of space which I know cannot be right. Can anyone out there help me with this situation? I am lost and upset not sure what is going on. According to my hard disk utility I only have 2.6GB of space availble which is insane!
One more note around xmas I found that my MAC had crashed unexpectedly but is working fine right now expect for the fact the HD is full and I can only see roughly 100GB of files on my 300GB Hard drive.
View 4 Replies
View Related
Dec 20, 2007
I'm looking to install a second internal hard drive on my Powermac G5. Is this Seagate Barracuda 7200.11 compatible?
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148274
Information:
Powermac G5 Dual Core 2.0
Mac OS X (10.4.9)
Dual 19" LCD, 3 GB RAM, Bose Companion 3
View 5 Replies
View Related
Nov 26, 2010
I installed the hard drive with no problem and have experienced greater performance, no clicking nor vibration, and no freezeup or rainbow wheel. I also did a clean install of Snow Leopard. I did a PRAM reset at the beginning and calibrated my battery. However, now I noticed my battery is draining FAST, only lasting 2 hours. I looked a little online and discovered I may still need to reset the SMC (shift-control-option + power key), which I will do shortly. The battery lasted 6-7 hours before with my old hdd and is at 96% capacity.
View 9 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies
View Related
Sep 20, 2010
I want to replace my 3 year old drives before it's too late.
I have about 200 gigs of data, split between a pair of Seagate Baracuda 7200rpm drives I bought 3 years ago.
I am thinking on going with a single 500 gig drive for my data, and I can't decide between a Caviar Black, or a Baracuda 7200.12.
I have read that the Caviar Black have incredible performance, , but only for the 1TB since it has 3 platters.
How do the 500gig models compare between WD and Seagate? I just don't have the need for more. My OS and Apps are on the SSD at 23 gigs, and all the rest of my work/personal files take up about 200 gigs.
Which is going to be better, the Black, or the Baracuda? 500 gig models only.
View 2 Replies
View Related
Apr 6, 2008
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
View 3 Replies
View Related
Jan 7, 2010
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies
View Related
Apr 8, 2010
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
View 8 Replies
View Related
May 3, 2010
I have been reading about people taking a SSD drive for Boot and OS and using a second HD for their data using MCE's Optibay hard drive enclosure.
I would love to go this way but I can't justify spending all the cash on a SSD yet. Could I put in 2 500GB 7200 rpm drives and RAID 0 them? I know this wont be as fast as SSD but it should be faster than a single hard drive and hold a lot more storage for less $$$.
View 1 Replies
View Related
Oct 15, 2009
as topic states, what do you think the difference in power consumption between 5400rpm and 7200 rpm?
View 4 Replies
View Related
Mar 8, 2009
I just wanted to do a quick writeup of what I've learned from upgrading my 2006 White Macbook from a 60gb 5400 Seagate drive (came with it) to the 7200 RPM 320 GB Western Digital Scorpio Black.
First of all, there's some discussion of whether the new drive vibrates, and the answer is yes it does to some degree. The 5400 isn't even perceptible, but the Scorpio Black makes the entire machine feel more like a computer instead of just a paperweight. (if that makes sense) Finder seems to work a little quicker now and programs load faster. I think the 16MB cache helps a lot in this respect (vs. 8MB for most 5400 drives.)
My computer has Tiger and boot camp beta installed with a split drive between Windows and Mac. I realized that I could not really rescue the Windows partition using Tiger, but apparently this is possible with a program called winclone on a Leopard machine. So I'm going to put the old drive into an external usb case for when or if I need Windows down the road.
Here's what you need to do this:
1. An External USB drive bigger than your internal drive (or with more space than the stuff you want to keep). Mine is 160GB.
2. Tiny/Jeweler size Philips screwdriver
3. Size 8 Torx driver. This is smaller than most sets provide, so you will probably need to go to Sears or a good hardware store and pick up one of this size for about $4.
4. a coin
A. Connect the USB drive to your macbook. Open Disk Utility and make sure the drive is formatted GUID with OSX Filesystem (Journaled). If you have a Windows files system on your external drive, this WILL NOT WORK.
B. Download Carbon Copy Cloner. Start up the program and start a backup from your original hard drive over to the USB drive. You may get a couple of error messages, but they probably don't matter.
C. Reboot the computer and make sure you can boot into the USB drive. You do this by holding Option when the computer makes the startup sound.
D. If everything looks good on the USB drive, you can shut down the computer.
E. Remove the battery with the coin.
F. Take off the metal L-shaped thing that holds in the memory and the hard drive. You need to undo 3 little phillips screws.
G. Pull the white plastic strip to remove the hard drive. Need to be careful at this point to avoid any static discharges, so take at least one shoe off and make sure your foot is on the ground.
H. Use the size 8 Torx to remove the hard drive carriage. Replace the old drive with the new one. Put the old one into the static bag.
I. Put everything back together. Note: when replacing the L-bracket, you should use a small flat-head screwdriver to stuff the memory buffer material back into their slots. Start up the computer.
Should boot into OSX, but you may have to hold the option key to get it to boot up. I've had this problem, but I think I may not have used GUID to format the disk.
View 1 Replies
View Related
Apr 16, 2010
I lean to the standard drive at 5400 rpm. Why? All my video editing is done with an external firewire drive, and I think the 7200 generates more heat than the 5400.
For web design I don't see how a 7200 speed is much of a benefit, considering the extra heat generated may negate the benefit of a faster drive. I think heat (and dust) is the bane of all electronics.
I'm fixing to order the 15" i7 and will use it for running Adobe CS5 web suite. Final Cut Pro for video- and will use a firewire drive.
View 17 Replies
View Related
Dec 26, 2010
i purchased a power mac G5 recently which broke after 2 days- it was bought from ebay. i sent it back to the seller who "repaired" it. It arrived today in the post and didnt work i oppend it up to see the hard drive had crack during transport, and the conector pins where bent and unconectable.
I made a clone copy of my macbook that should be bootable using something called carbon copy cloner, i now want to boot my power mac g5 from the external usb hard drive. This just apears on the screen with a folder and a question mark flashing. What can i do or is this possible.
View 7 Replies
View Related
Aug 24, 2007
My hard drive just failed in my 12" PowerBook G4 1.3Ghz. I wondering if any one can confirm whether this disc would fit/work [URL]
View 1 Replies
View Related
Jan 11, 2008
I have a 40gb drive and i want to get a bigger one? What will fit and work. Will this? [URL]
View 8 Replies
View Related
Apr 16, 2009
I have tried troubleshooting, searching this forum, & googling to no avail. I'm hoping someone smarter than me can figure this out.
Short Version:
Purchased this hard drive:
[URL]
and purchased this external enclosure:
[URL]
when I plug it into my macbook, PC, or a powerbook, the disk is not recgonized, I can not get Disk Utility to even recognize that the hard drive exists. I thought it may be a bad drive, so I sent it in to Seagate Warrenty, they sent me a new one and I'm still having the same problem. Does anyone know how I can format the drive or any way I can get it to be recognized?
Longer Version:
My powerbook crashed, so I purchased this HD to replace it. I installed the 1st seagate and when i went to install OSX and said select destination drive, there was none there to select. I was able to repair the original HD so I reinstalled it and went to install OSX and it DID show the drive to install it on, so I don't think that it is the computer/motherboard. Then I sent in for the 2nd seagate, tried getting it to work with the external enclosure and installing internally in the powerbook, etc. nothing seemed to work.
I am wanting to install the new drive in the powerbook as the old drive is on its last leg (but currently works). Every thread i have searched for that was similar, there was no solution that I could use.
View 13 Replies
View Related
Jun 20, 2009
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions:
http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
View 12 Replies
View Related
Jun 24, 2010
I recently tried to switch drives to run the Operating System 10.4.6 on my 1st gen G5 1.8ghz. The new drive(160GBs) is smaller than the old system drive(1TB) so I ran a 3rd party app to clone what I thought was the important stuff onto the new drive; but not everything because it wouldn't all fit. I moved everything that looked like it wasn't just a dumb folder with my media files on it. It seemed like I moved everything important on the new drive.
When I swapped out the drives in the top bay and booted the computer, the new drive didnt boot the OS, instead it opened up a black screen that looked like some sort of terminal. I did something wrong and I cant figure out what. Does anyone have better steps to take? Its not the end of the world to start over, but if anyone knows what I did wrong that would be super information!
View 11 Replies
View Related
Aug 18, 2009
Because of the re-introduction of the matte displays, I'm thinking about purchasing a 2.8ghz Macbook Pro. To make up for the 50$ of non-conformist-punishment-tax for the matte option I'd like to downgrade to the 320gb 7200 RPM drive. I've read about the issues with the 500gb drives - does the 320gb version also have the chirp / beep issue?
View 1 Replies
View Related
Sep 15, 2006
I was using my mom's 500 mhz G3 iBook circa 2k1, running 10.2.0 and it decided to start tweaking out on me. Being a somewhat aware computer person, I thought tat a simple restart would fix all of this. Shows you how much I know. Anyway, the boot-up screen showed the icon of the file with the question mark inside. Find the OS 9 CD that we have and I booted up through the CD. I finish starting up and, to my surprise, the drive appears to be erased- the computer asks me if I want to initialize the disk. I hit cancel and proceed to run the disk repair on the OS 9 CD. After it's done scanning, the the results are: "Missing Thread Record, 62078, 4260". What does it all mean? Will the computer be able to recover? What fate lies in store for the iBook?
View 3 Replies
View Related
