I have two USB harddrives and neither of them are recognized by my G4. One of them consistently requires two ports for power, so I'm not surprised that one isn't working. However, my backup drive (a Verbatim) should not need that and it is supposedly compatible with USB 1.1 ports. It shows up on a Macbook. I am also quite sure that the ports themselves are working.
View 2 RepliesI bought a powermac G4 from ebay awhile back but just recently got it up and running. So far i am liking it and decided i wanted more ram then the 384MB it was sent with. So i looked on ebay to find ram, i purchased this ram right here. [URL] I bought 3x512mb and none of the sticks are recognized in any of the 3 slots. I'm thinking the problem is that the ram is high density, can any give me their opinion on it. Also, with pc's there is a way to get to a bios screen, do macs have anything similar to that? Besides the boot selection screen? I forgot to mention, the mac i own is a powermac g4 single 533MHz cpu.
View 7 Replies View RelatedI've already RMA'd the first 1gb stick back to Crucial, and now I'm on the second. Sometimes the system boots, sometimes it hangs at a blank screen until I hold the power button down long enough to turn it off. But when I CAN actually get up and running, "About This Mac" reports that I only have the onboard 512mb. System Profiler says my singular expansion slot as empty! Yes, I've tried re-seating it-- many times. To no avail. I'm also positive the module is as far into the slot as it can go. And I find it hard to believe that Crucial would send me two faulty sticks in a row. Unfortunately, due to my built-in 512mb, I can't boot off the Crucial ram alone.
View 7 Replies View RelatedI pulled a 256mb stick out of the girlfriend's dead PC laptop and it fits in my 14" iBook G4 and when I originally put it in, "About this Mac" said I had 768mb, meaning it recognized the new RAM, now its about three weeks later and "About this Mac" says its 512mb again. So, I pulled the RAM out, put it back in, it recognized it for about a day and now its back to saying 512mb.I know when you buy RAM new, it comes with a CD(usually) to scan your computer, so is that the problem and if so, is there a download of the software online?
View 2 Replies View RelatedWhen I installed it, system profiler keeps saying it's 256. I have a 128 and 2 64's in there. In the 4th slot I put the 512. I tried just putting it in (to make just 512) and it still said.
What is weird is that when it only had the 512 stick in there, it seemed faster then with just the other 3 sticks. Is it just saying the wrong number?
I just replaced the original 20gb Toshiba HD in my 12" white G4 iBook (1.2gHz, 1.25gb RAM) with a new Western Digital 80gb Scorpio drive. No real issues with the swap, except the new harddrive apparently isn't being recognized. Don't see it in either the Disk Utility or System Profiler, but I can sure hear it spinning after power-up. I know it needs to be formatted, but how is that possible without being able to access it with the Disk Utility?
So, what's my next step? Anything I can try without taking the whole damn thing apart again and checking things with the old harddrive? BTW, only trouble with the old drive was its size. I've been running Leopard on it for several months.
Well I have this problem on my iBook. At first I thought it was just my printer, but now I have it with my iPod. I plug anything in to the usb ports and it is connected by my ibook doesn't recognize anything I plugin. My iPod is sitting here on do not disconnect, but it doesn't show up on my desktop or in itunes. When I plug in my Epson printer and try to print, it wont connect to the printer, but the printer is on and the connection is good. They both work on any other computer in my house. I go into system profiler and when I click USB it just has the loading wheel going. That's all I get. The weird thing is that my mouse which is connected via the USB port does work.
View 1 Replies View RelatedI have an iBook G3 Dual USB with 256MB of RAM currently (128 on LB, and 128 in the user accessible slot under the keyboard). I bought a 512MB chip on eBay that meets the exact specs of the required RAM (512MB PC133 SDRAM SODIMM 3.3V) but when I insert it into the RAM slot and turn on the iBook, it says in About This Mac that I only have 128MB of RAM. what I can do, or is the chip possibly not compatible with Apple?
View 2 Replies View RelatedI want to import massive amounts of footage from my camcorder and I want to import them into my external hard drive. The drive is plugged in, and is recognized by Finder, but when I hit import and try selecting the hard drive to save it, the external drive isn't there.
View 1 Replies View RelatedI have a 2.4 Ghz MacBook that i bought last summer, and a 250 GB Western Digital external hard drive (powered by computer) that i also bought last summer.
My problem is that My computer will not recognize the hard drive at all. it doesn't show up anywhere, and after attempting to reconnect it over and over, it will eventually pop up, and then disappear, saying that it was improperly ejected.
Leopard isn't detecting my external drives. They were working for a long while before but since have decided not to show up in the OS. They are firewire 400 and 800 drives connected directly to the macbook pro. They are not showing up in the disk utility.
View 2 Replies View RelatedI have a iMac G5 with an Airport Extreme Card installed and an Airport Express Base Station. I have set a password on it and it is working fine on my G5.
I also have a G3 Clamshell iBook with OS 10.3 on it and an Airport card installed there. In my last home, it was able to connect to a default network without problem, but I have never been able to connect it to the same network as my G5. I enter the password and it says thet the password is not recognized. I have since moved into a new house and the only network that shows up is the one from my house (no default anymore and I can't get access to the internet.
I know the card is working since it picked up the default in my last place, but am wondering what I can do to get it to recognize the password. Should I reset the Airport Express. Do I need a more current version of OS X to run it than the OS 10.3 (I haven't updated the software as I just installed OS 10.3 from OS 10.2 last night and didn't have the connection to be able to do a software update - I could just plug it into the ethernet and do it if I need the update.
I don't want to leave it without a password. We are the only people right now in a new sub division but there will be people moving into the area soon that I don't want jacking my internet service.
I have a 366 G3 graphite iBook that was working fine in OS9 a few months ago. I took it out of the closet yesterday and installed 10.3. I did all the updates etc., and now the computer will not recognize the battery! There is a battery icon on top, but when the light is amber on the machine (charging) it says it is calculating how long it will take to charge. Once the light is green (charged) it says there is no battery. I take out the plug and the machine turns off. On top of that, the clock has to be reset everytime I unplug the machine. I don't get it, the battery was like new back in September - it would go for hours. Now it's like it's not even there!
View 6 Replies View RelatedI have a 12" PowerBook G4 that stopped recognizing the factory hard-drive some time back. I have a G4 iBook so I was not in a hurry to look into it. I removed the old hard-drive and replaced it with a Scorpio drive of 60GB. It still fails to recognize the hard-drive. If I run the Apple Care diagnostics it hangs at the start-up while 'scanning for volume' or something like that. t hangs for 15-minutes or more and never moves past. The CD-RW drive is fine as I can boot the machine into the OSX installer up to the point where it asks for a destination...at which point nothing is selectable. It is a 867MHz G4 PowerBook with 768MG RAM. This is a fantastic notebook and I would hate to see it remain in this state. Does anyone have any ideas? I replaced the IDE cable and hard-drive with all new Mac OEM parts (except the HD) and reset the PRAM or PMU or what ever it is called...with no results.
View 5 Replies View RelatedInitially it would intermittently not recognize the RAM that was in the 2nd slot (not the on-board ram). Now it does not recognize the 2nd RAM slot at all. I know it's not the stick, as we've put different sticks in to test.
View 4 Replies View RelatedI have an snow iBook G3 that I use everyday as my machine for doing schoolwork etc., so it is a very critical machine. The battery doesn't hold a charge anymore, so I just plug it in. No big deal. However, just a few hours ago the iBook started to not recognize it was plugged in. The prong has always been bent a bit, I think, and it always worked (before MagSafe type). The charger is beat up at the cord going into the power brick from the wall outlet, but it has always worked too and it seems to be a problem with the prong going into the computer. I have to hold it a very certain way for it to even detect power. So, the machine has NO way to get any power. I was thinking about taking it in to the Apple store to see if they could still get me a non-magsafe charger, but what if its something different then the charger?
The specs are as follows:
12 inch iBook
PowerPC G3
500 mhz
128 gb RAM
I have a Vista laptop I can use until its fixed, but I'd rather not use Windows. No speical prgrams or anything, I just really like Mac OSX. I have files on the iBook, too.
I used this iPod (new) previously on my husbands PC. I recently purchased a refurbished iBook G4 and it works great with the exception of not recognizing my iPod! When I plug it in, it give me the error message: Disc Insertion - The disc you inserted was not readable by this computer. What does this mean? It has been a while since I've used a mac. I've tried restarting my iPod both off and on the mac with no change. I'm worried I'll lose all my music. Have also tried repairing and verifying with no results.
View 1 Replies View RelatedMy powermac G5 has been off for a week while I was moving apartments. When I plugged it in again the external harddrives (four in all) that were daisy chained through the two firewire ports aren't being recognized anymore. I thought it was a bad cord or insufficient power but nothing worked. When I finally got around to looking at the System Profiler and check Firewire it said, "Unable to list firewire devices". I admit that I'm at a loss and I have no idea how to troubleshoot this.
View 3 Replies View RelatedI have a MAC Book and am trying to upload some files from an external drive (OWC Mercury Elite-AL Pro) to my notebook but am having trouble with it. When I plug it in, the drive doesn't even appear as an icon on my desktop. The drive works, is charged and is on.
View 7 Replies View RelatedJust today my eMac stopped recognizing the Airport Extreme Card. I tried restarting, reseting PRAM and the PMU, and pulling the card in and out.
View 11 Replies View RelatedI have just bought an iMac after being a die-hard PC user for many years and am just getting to know my way around.
My old NTFS hard drive (salavaged from my old PC and in an external hard drive caddy) has two partitions but when I plug it in to transfer my data, it only recognises one of the partitions? (unfortunately the smaller, less useful one. Of course.
I pulled up the information and it said i was only using 35GB and it said I only had 600 some MB available. I tried deleting a movie file from it and the available space amount did not change. I added the movie file back on to it and it took away even more space! I now only have 273 MB available on a hard drive that should contain much much more.
View 7 Replies View RelatedWe have a imac 20" bought 9 months ago, Im in school and bought adobe suite and a printer, installed the printer with the internal optical drive, I go to install the adobe suite and the optic drive accepts the dvd and then just kicks it out! so it is toast, the apple guys gave me a repair depot to take the Imac to.
View 2 Replies View RelatedI am trying to get my iBookG4 to recognize a toshiba external hard drive. When I plug in the hard drive a blue light comes on but the external drive does not show up on the desktop. I'm looking for some program to get it to recognize the hard drive.
View 1 Replies View RelatedYesterday, (Mar 28,2012) Finder was listing my external drive but when I went to eject the drive, it no longer showed in Finder. I cannot eject the drive properly. It is showing on my Desktop. I've done a disk utility verfy disk and it is recognized and no problem was found. I tried a new USB cable and the old Fire Wire (which doesn't work??). I used a different USB port but nothing seems to work. I've also tried restarting. I am running a MacBook Pro with 10.6.8.
Info:
MacBook Pro
My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?
Info:
iMac, Mac OS X (10.6.8)
I have a mbp with retina display and is not reading my rugged lacie external hd connected via the 2 usb ports. The lacie model that I have is the 500 gb one with the 2 firewire ports and one usb. When you connect it via usb you have to plug use 2 ports one for power the other for info. I'm trying that in the mbp retina and is not recognizing it. It doesn´t appear in the disk utility nor in the system info under the usb ports.
View 4 Replies View RelatedJust bought new version of Final Cut and it will not recognize the external hard drive that I plug into my usb or the extra hard drive that I had installed into my laptop to do video work on for more space.
Info:
Final Cut Pro X, Mac OS X (10.7.5)
eMac stopped recognizing the Airport Extreme Card. I tried restarting, resetting PRAM and the PMU, and pulling the card in and out. Is there anything else I can try?
View 1 Replies View RelatedMy MacBook Pro (running OS X 10.6.2) suddenly does not respond when the "Enter" key on my external Apple keyboard is pressed. All the other keys work fine. I'm using the Apple low-profile keyboard with numeric keypad--here's a link to it at the Apple Store.
The problem doesn't appear to be with the keyboard; I've plugged it into another MacBook (running the same OS), and the Enter key works fine.
