Initially it would intermittently not recognize the RAM that was in the 2nd slot (not the on-board ram). Now it does not recognize the 2nd RAM slot at all. I know it's not the stick, as we've put different sticks in to test.
View 4 Replies
I've already RMA'd the first 1gb stick back to Crucial, and now I'm on the second. Sometimes the system boots, sometimes it hangs at a blank screen until I hold the power button down long enough to turn it off. But when I CAN actually get up and running, "About This Mac" reports that I only have the onboard 512mb. System Profiler says my singular expansion slot as empty! Yes, I've tried re-seating it-- many times. To no avail. I'm also positive the module is as far into the slot as it can go. And I find it hard to believe that Crucial would send me two faulty sticks in a row. Unfortunately, due to my built-in 512mb, I can't boot off the Crucial ram alone.
View 7 Replies View RelatedI pulled a 256mb stick out of the girlfriend's dead PC laptop and it fits in my 14" iBook G4 and when I originally put it in, "About this Mac" said I had 768mb, meaning it recognized the new RAM, now its about three weeks later and "About this Mac" says its 512mb again. So, I pulled the RAM out, put it back in, it recognized it for about a day and now its back to saying 512mb.I know when you buy RAM new, it comes with a CD(usually) to scan your computer, so is that the problem and if so, is there a download of the software online?
View 2 Replies View RelatedWell I have this problem on my iBook. At first I thought it was just my printer, but now I have it with my iPod. I plug anything in to the usb ports and it is connected by my ibook doesn't recognize anything I plugin. My iPod is sitting here on do not disconnect, but it doesn't show up on my desktop or in itunes. When I plug in my Epson printer and try to print, it wont connect to the printer, but the printer is on and the connection is good. They both work on any other computer in my house. I go into system profiler and when I click USB it just has the loading wheel going. That's all I get. The weird thing is that my mouse which is connected via the USB port does work.
View 1 Replies View RelatedI have an iBook G3 Dual USB with 256MB of RAM currently (128 on LB, and 128 in the user accessible slot under the keyboard). I bought a 512MB chip on eBay that meets the exact specs of the required RAM (512MB PC133 SDRAM SODIMM 3.3V) but when I insert it into the RAM slot and turn on the iBook, it says in About This Mac that I only have 128MB of RAM. what I can do, or is the chip possibly not compatible with Apple?
View 2 Replies View RelatedI have a iMac G5 with an Airport Extreme Card installed and an Airport Express Base Station. I have set a password on it and it is working fine on my G5.
I also have a G3 Clamshell iBook with OS 10.3 on it and an Airport card installed there. In my last home, it was able to connect to a default network without problem, but I have never been able to connect it to the same network as my G5. I enter the password and it says thet the password is not recognized. I have since moved into a new house and the only network that shows up is the one from my house (no default anymore and I can't get access to the internet.
I know the card is working since it picked up the default in my last place, but am wondering what I can do to get it to recognize the password. Should I reset the Airport Express. Do I need a more current version of OS X to run it than the OS 10.3 (I haven't updated the software as I just installed OS 10.3 from OS 10.2 last night and didn't have the connection to be able to do a software update - I could just plug it into the ethernet and do it if I need the update.
I don't want to leave it without a password. We are the only people right now in a new sub division but there will be people moving into the area soon that I don't want jacking my internet service.
I have a 366 G3 graphite iBook that was working fine in OS9 a few months ago. I took it out of the closet yesterday and installed 10.3. I did all the updates etc., and now the computer will not recognize the battery! There is a battery icon on top, but when the light is amber on the machine (charging) it says it is calculating how long it will take to charge. Once the light is green (charged) it says there is no battery. I take out the plug and the machine turns off. On top of that, the clock has to be reset everytime I unplug the machine. I don't get it, the battery was like new back in September - it would go for hours. Now it's like it's not even there!
View 6 Replies View RelatedI have an snow iBook G3 that I use everyday as my machine for doing schoolwork etc., so it is a very critical machine. The battery doesn't hold a charge anymore, so I just plug it in. No big deal. However, just a few hours ago the iBook started to not recognize it was plugged in. The prong has always been bent a bit, I think, and it always worked (before MagSafe type). The charger is beat up at the cord going into the power brick from the wall outlet, but it has always worked too and it seems to be a problem with the prong going into the computer. I have to hold it a very certain way for it to even detect power. So, the machine has NO way to get any power. I was thinking about taking it in to the Apple store to see if they could still get me a non-magsafe charger, but what if its something different then the charger?
The specs are as follows:
12 inch iBook
PowerPC G3
500 mhz
128 gb RAM
I have a Vista laptop I can use until its fixed, but I'd rather not use Windows. No speical prgrams or anything, I just really like Mac OSX. I have files on the iBook, too.
I used this iPod (new) previously on my husbands PC. I recently purchased a refurbished iBook G4 and it works great with the exception of not recognizing my iPod! When I plug it in, it give me the error message: Disc Insertion - The disc you inserted was not readable by this computer. What does this mean? It has been a while since I've used a mac. I've tried restarting my iPod both off and on the mac with no change. I'm worried I'll lose all my music. Have also tried repairing and verifying with no results.
View 1 Replies View RelatedI have a g4 slot loading drive and I am fulling aware the outside casing would be wrong... but that isn't much of an issue, I can replace the panel/casing section with a new panel to take care of that... i just want to know if it is possible as far as hookups etc are concerned.
View 3 Replies View Relatedi just bought a used Ibook g3 800mhz, and i does not come with the airport card,
i was searching on ebay and came across this:http://cgi.ebay.com/Apple-Airport-Co...QQcmdZViewItemwhat you think of that? would it work as good as a original appel cardwill ti damage my computer?or should i get an original apple card?i got this email from them;Yes, I can gurantee it will not damage your Mac. My card and
the apple airport card are both 16-bit PCMCIA cards and followthe standards of PCMCIA. Moreover, the airport slot conforms tothe standards set forth for a PCMCIA receptacle slot.I have DOA protections for buyers stated in my listing. I do not
have a warrantly because I have never sold a bad card or had areported failure. Warranties are based on failure rates,
I just installed 8 gigs of ram on my mid 2009 13 inch macbook pro. OSX recognized the ram as soon as I rebooted but the windows partition still says 4 gigabytes. Am I forgetting something or is windows just... being windows.
View 23 Replies View RelatedI'm having trouble with my macbook. It's dropping the wireless signal right and left...sorta. Airport isn't disconnecting, it just stops recognizing the signal until I cycle the airport card off and on.
View 6 Replies View RelatedI just got a G5 power mac (dual 2.3GHz) and bought one of these: [URL] as an airport substitute. When trying to install the card it doesn't appear to fit in the PCI slot. Am I right in thinking it should fit? Since it's a PCI card and the G5 has PCI/PCI-X inputs?
View 3 Replies View RelatedI bought a powermac G4 from ebay awhile back but just recently got it up and running. So far i am liking it and decided i wanted more ram then the 384MB it was sent with. So i looked on ebay to find ram, i purchased this ram right here. [URL] I bought 3x512mb and none of the sticks are recognized in any of the 3 slots. I'm thinking the problem is that the ram is high density, can any give me their opinion on it. Also, with pc's there is a way to get to a bios screen, do macs have anything similar to that? Besides the boot selection screen? I forgot to mention, the mac i own is a powermac g4 single 533MHz cpu.
View 7 Replies View RelatedI have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
The Graphite 733mhz PM G4 has only 3 ram slots. But the "fourth" one shows up on my system as "empty". Does this mean that it may be physically possible to put another ram slot in there? I'm confused by the limitation -- though I heard that Mac OS9 could only recognize up to 1.5gbs of ram.
View 2 Replies View RelatedWhen I installed it, system profiler keeps saying it's 256. I have a 128 and 2 64's in there. In the 4th slot I put the 512. I tried just putting it in (to make just 512) and it still said.
What is weird is that when it only had the 512 stick in there, it seemed faster then with just the other 3 sticks. Is it just saying the wrong number?
I just replaced the original 20gb Toshiba HD in my 12" white G4 iBook (1.2gHz, 1.25gb RAM) with a new Western Digital 80gb Scorpio drive. No real issues with the swap, except the new harddrive apparently isn't being recognized. Don't see it in either the Disk Utility or System Profiler, but I can sure hear it spinning after power-up. I know it needs to be formatted, but how is that possible without being able to access it with the Disk Utility?
So, what's my next step? Anything I can try without taking the whole damn thing apart again and checking things with the old harddrive? BTW, only trouble with the old drive was its size. I've been running Leopard on it for several months.
I have two USB harddrives and neither of them are recognized by my G4. One of them consistently requires two ports for power, so I'm not surprised that one isn't working. However, my backup drive (a Verbatim) should not need that and it is supposedly compatible with USB 1.1 ports. It shows up on a Macbook. I am also quite sure that the ports themselves are working.
View 2 Replies View RelatedFirst and foremost I should tell you that I am a new convert from Windows.
I'm currently running OS X 10.3 and find that I can not read any of my DVD+R discs but I can read my CDRs just fine. My guess is that the optical drive is simply too old to recognize the DVD+R format. Is this correct?
My alternative to this would be to purchase a firewire external drive enclosure and put one of my newer dvd burners in it, but would I be able to boot from this type of connection or do I have to actually buy a "superdrive"?
Until yesterday, my iMac G3 slot is working fine, but today, I can't power it up. When I press the power button, the light just flash and then went off. I've opened it up to check the PRAM batt and also checked if there are any shorts on the logic board. All looked ok to me. The HDD is working fine and I supposed the power supply unit is fine too.
View 2 Replies View RelatedWhat is the size of the drive is it 9.5mm or 12.7mm?
And will this work?
[URL]
I know it doesn't say it is compatible but it is a slot loading drive compatible with osx.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
I have a 12" PB and latelly became a nightmare with the stuck CDs. Usually it does not want to eject CDs/DVDs from companies but it handles fine virging cds/dvds. ?? Probably there is some formating in the industrial kind of CDs outside, who knows.just want to open this thread for people with the same problem.If the drive tries to eject but can't and end up mounting the CD again. Just take another CD and when you press eject again push that CD into the slot but just one third and you will see the stuck CD coming out with no problem as well.It seems there is a sensor or something that obviously does not work well. I inserted a virgin CD and the drive worked just fine and ejected later on, but a CD as the installer for my Linksys get stuck and some other softwares too.
View 9 Replies View RelatedI just restored an old 1999 G3 iMac DV 400MHZ with slot-drive from the dead, and I feel it lacks a bit of power under it's hood. I already put RAM and HDD but the computing power is just not enough. What I want to do is go into OpenFirmware and speed up the cpu and possibly the bus, I remember doing so on my sawtooth but I can't find the code plus that was a G4 and now I have a G3. I also found this page [URL] that shows how to mechanicaly overclock up to 1GHZ but I want to be able to do it non physical if possible. I know this isn't the hot topic now a days but maybe some of you will remember what they used to do and feel some nostalgia(is that a propper word?).
View 2 Replies View RelatedI have a charcoal iMac DV SE 500 which won't complete a proper start. The machine chimes and begins to start, and then clicks off again before anything can show on the screen. It won't start in Target Disk mode, and zapping the PRAM (starting with alt/apple/P/R, right?) has no effect. Does this sound like a dead PRAM battery, a dead 'Power/Analog' board, or a dead hard drive? Can anyone give me an idea of how much it would cost to fix, and recommend good, reliable, cheap UK repairers It's not worth much, but I have a friend who'd love it if it can be restored to life, and I'd like to get some of the files off it if it's not the drive.
View 5 Replies View RelatedI bought a second hand iMac G3 off eBay for a pretty good deal, and am trying to figure out where the buzzing is coming from.
It doesn't come with any CDs so I don't think I can do a hard wear test, but I've noticed it is happening even when the display is off, and is in sleep (although it gets less audible in sleep).
Another thing I noticed is that in OS X it will stop after a while of not using it, despite the screen being on and still showing the image, is this the hard drive stopping? When I go and touch a key or move the mouse it starts again.
I have currently acquired a few old Macs. I have got an iMac G3 SE with a slot loading drive. The computer is fine all barr the slot load drive - it has died. I have also got a PPC Mac Mini with a suggested logic board failure.
Does anybody think there is a chance i could replace the broken slot load drive in the iMac with the working one from the mac mini? i don't want to start opening the iMac up if someone already knows theres no chance it would work.
I have a Powerbook G4 that I wanted to upgrade to 1.5G from 512MB. So I added Corsair 1GB DDR RAM to the notebook and it seems to have issues recognizing both at the the same time. When I put both of them in together, it never seems to recognize the bottom slot. Putting in the 512MB in the bottom w/o the 1GB the Powerbook boots up fine. Putting in the 1GB by itself and it gives beeping noises on bootup, but it'll boot up if I put it on the top slot.
View 4 Replies View Related
