PowerPC :: New PowerBook G4 RAM Not Being Recognized?
Sep 7, 2006
This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.
[URL]
This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM
I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?
View 3 Replies
ADVERTISEMENT
Jan 7, 2008
I've got a 1.5Ghz PB G4 (128MB Radeon 9700 model), and it would appear that the DVD burner is no longer being recognized. It's out of warranty. I've opened it up and verified that the cables are all connected. I know it is receiving power, because it spins up when I tell the computer to shut down. Symptoms: disc in the drive does not mount, eject key does nothing, Disc Burning in System Profiler says "No burning device was found. If you are using an external device please make sure that it is connected and powered properly.", disc in drive is not seen by Disk Utility, ATA in System Profiler only shows my hard drive.
View 4 Replies
View Related
Nov 15, 2006
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies
View Related
Oct 15, 2008
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies
View Related
Jan 18, 2007
my friend plugged in her ipod and at first it showed up on the desktop, but then it disapeared and it is not recognized on itunes, but the ipod still says do not disconnect, what should she do?
View 1 Replies
View Related
Apr 24, 2007
i have a powermac g5 dual 1.8 tower. the dvd burner is a pioneer dvd-rw dvr-107d. according to the system profiler, this should be able to burn either - or +R discs and cds. also, the computer belonged to a friend who was using it to burn dvds up until the day she delivered it to me.
i switched out the harddrive and reinstalled everything fresh (in case that matters.)
now when i put in a blank dvd or cd (different brands, different formats) it comes up with an error message that says: This disc cannot be used because it is not recognized.
View 4 Replies
View Related
Jun 30, 2007
I own a PowerMac G5 but for my anniversary my girlfriend got me a G4 Cube because she knew how much I loved 'em. I just found out that you need USB speakers.
1. (Even though I don't have speakers) When I put an audio cd in the CUBE.. it recognizes it, but when I hit the play button on iTunes, the swirling beach-ball will just sit there. What's up with that?
2. Can I upgrade the processor and boost the memory up to 1GB?
G4 Cube
450 MHz
512MB Memory
100 HDD
View 6 Replies
View Related
Oct 13, 2007
I hope I can get some help for a bizarre problem I'm having with my iBook G4 (1.2ghz). When I first got the machine (2004) I put in a 256mb Crucial stick and never had a problem. Recently (last 2 months?) I've noticed that a big slowdown so on a whim I checked my "About this Mac" and sure enough it only lists the stock 256mb. Is it possible for the added RAM to have just plopped out?
View 5 Replies
View Related
Mar 10, 2008
I recently went through the very arduous process of replacing the harddrive in my aluminum G4 12" PowerBook. The process was a complete pain in the rear, and I ended up ripping a socket off the motherboard.
View 15 Replies
View Related
Apr 16, 2009
I have tried troubleshooting, searching this forum, & googling to no avail. I'm hoping someone smarter than me can figure this out.
Short Version:
Purchased this hard drive:
[URL]
and purchased this external enclosure:
[URL]
when I plug it into my macbook, PC, or a powerbook, the disk is not recgonized, I can not get Disk Utility to even recognize that the hard drive exists. I thought it may be a bad drive, so I sent it in to Seagate Warrenty, they sent me a new one and I'm still having the same problem. Does anyone know how I can format the drive or any way I can get it to be recognized?
Longer Version:
My powerbook crashed, so I purchased this HD to replace it. I installed the 1st seagate and when i went to install OSX and said select destination drive, there was none there to select. I was able to repair the original HD so I reinstalled it and went to install OSX and it DID show the drive to install it on, so I don't think that it is the computer/motherboard. Then I sent in for the 2nd seagate, tried getting it to work with the external enclosure and installing internally in the powerbook, etc. nothing seemed to work.
I am wanting to install the new drive in the powerbook as the old drive is on its last leg (but currently works). Every thread i have searched for that was similar, there was no solution that I could use.
View 13 Replies
View Related
Aug 1, 2010
My G5 PowerPC will not recognize any external drive, on the desktop or Disk Utility. One showed up briefly, but the computer locked up . I've tried each drive on my Imac and they all show up and work perfectly.
View 1 Replies
View Related
Jun 19, 2008
I'm attempting to upgrade a family member 800mhz iBook G3 from 10.2 to 10.4 using my old iPod as the install drive. (Restored a DMG, etc) Only problem is that (other than being an ancient computer, I guess) is that said iBook doesn't see the iPod until after OSX loads (white spinny guy).
Tried holding Alt at bootup (not listed), setting it as the default boot device (just skips it and goes right to the HD), and just running it from OSX (reboots, straight back to OSX desktop).
Is there something I'm missing? Does this model G3 not allow detecting boot devices at start up? I'm kind of at a brick wall here. Should I just bite the bullet and do a target disk install?
View 1 Replies
View Related
Sep 19, 2010
My WD firewire 800 drive has stopped working, I can hear it spinning when I plug it in but the light doesn't come on and my computer doesn't recognize it. I've tried both the firewire and usb connections.
View 3 Replies
View Related
Dec 22, 2009
I just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
So: how can i access the airport card settings to get wireless connectivity?
View 2 Replies
View Related
Nov 22, 2006
I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
View 3 Replies
View Related
Mar 14, 2007
So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?
View 6 Replies
View Related
Jul 18, 2007
Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...
View 3 Replies
View Related
Sep 27, 2007
I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..
Type: DDR SDRAM
Speed: PC2700U-25330
And these are the types i've been seeing to choose from.
G4 15-inch 1.67GHz (DDR M9676LL/A) Memory
G4 15-inch 1.67GHz (DDR M9677LL/A) Memory
G4 15-inch 1.67GHz Double Layer DDR2 (M9969LL/A) Memory
View 1 Replies
View Related
Sep 3, 2008
I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.
View 3 Replies
View Related
Sep 6, 2008
I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?
View 1 Replies
View Related
Jul 22, 2009
I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?
View 6 Replies
View Related
Aug 9, 2009
I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]
View 7 Replies
View Related
Aug 26, 2010
Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.
3 beeps
3 lights (1 long + 3 quick flashes)
I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?
View 1 Replies
View Related
Nov 27, 2010
Do you guys think it would be worth it to spend the $50 to upgrade from 1.5GB ram to 2 GB ram in this machine with Tiger on it?
View 7 Replies
View Related
Jul 31, 2006
I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
View 6 Replies
View Related
Sep 13, 2006
My PowerBook 12" 1.5G has 100% CPU usage when playing back the new TV program from iTunes store. And sometimes it even choke.
While I have no virus scanning software, some programs running such as Opera, iTunes, Entourage and have about 20% CPU usage when idle.
Why is it so slow on a PowerBook while you can actually play that video on an iPod? Is it the iPod too powerful or it is just because apple did not optimize enough for older Macs (pushing people to new hardware)?
I have just ordered a new iMac but I am not happy about my PowerBook which is just one year old.
View 5 Replies
View Related
Oct 3, 2006
I have an older 15" G4 Powerbook (before the recalled Powerbooks with the RAM slot failures) that has recently been experiencing some speed issues. To my dismay, when I checked my 'About This Mac...' I no longer had 1GB of RAM, only a lowly 512 MB. Tonight I sat down and started swapping and removing my two sticks of RAM and as it turns out, something is up.
With a 512 stick in the lower slot, System Profiler tells me I have 512 MB of RAM and that the upper slot is empty. When I put the other stick in the upper slot (leaving the lower one in), System Profiler now says I have 512 MB of RAM and that the lower slot is empty. Does this look to be a (out of warranty) logic board failure? Is there anything else I can try to do? On a related note, when removing the screws from the RAM panel on the bottom of my PB, one screw fell into my Powerbook, never to be seen again. Is this going to cause any problems down the line?
View 1 Replies
View Related
Oct 6, 2006
I think my backlight went out?
I restarted and nothing. Still dim. I can barely, barely see things like if I hit expose, I can see shifting rectangles.
Also, I've been having this issue where the keyboard mostly stopped working -- if I hit kjjh, it'll come up as 3443 or something. It's usually fixed with a restart.
I have it covered by a year of applecare until feb 24, 2007 -- but I haven't registered it yet. Should I register and then call apple or what?
This comes at a REALLY bad time. I have design projects coming up everywhere and of course, despite my $250 external hard drive, i haven't been backing things up because I'm an idiot.
Can I hook it up to a external monitor just to make a backup of my hard drive?
View 4 Replies
View Related
Oct 8, 2006
Is it possible to get 2 gigs of RAM into a Powerbook (12") or is it stuck at 1.25 gigs?
View 2 Replies
View Related
Oct 19, 2006
My Friend has a 15" Powerbook (2nd last rev.... 1.67ghz with lo-res screen) and it's been on the fritz lately. It operates completely normal and then it suddenly goes to sleep. When I wake it up it's back to normal just fine. It goes to sleep after about 3 minutes of use.
View 1 Replies
View Related
