Power Mac G5 :: USB2 Card Becomes Unresponsive?
Nov 28, 2007
I have a USB2 PCI card in my G4, and any devices plugged into it (mainly my iPod Shuffle) become unresponsive after a few minutes. For instance, I will be copying songs to my iPod, and halfway through, the copying process will drag to a halt. Burning CDs to a USB2 CD-RW often fail because the burn cannot complete. I have tried two different brands of USB2 cards with the same result.
Information:
PowerMac G4 350 MHz AGP
Mac OS X (10.3.9)
View 10 Replies
ADVERTISEMENT
Mar 11, 2012
Just wondering if a USB3 cable CF card reader will work on on my USB2 port on my old Intel 24" white iMac?
Info:
24" iMAC
View 2 Replies
View Related
May 29, 2012
a friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies
View Related
Oct 8, 2007
I hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
View 1 Replies
View Related
May 15, 2012
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Info:
PowerMac, Mac OS X (10.4.11)
View 4 Replies
View Related
Sep 21, 2010
Problem is that all my back up is on a Iomega miniMax Ext HD that I backed up and cloned my old HD. Via FireWire. I've noticed that the new Macbook ONLY has USB 2. Will my EXT HHD still work.( It does have a USB2 connection). Obviously I wont want to be using my old OS ( Panther) But I do have quite a few app.s that I'd like to transfer to the new OS
View 1 Replies
View Related
Feb 18, 2010
I have a mac osx 10.4.6 and want to watch tv on it Iam having trouble finding tv for usb 1.Iwill be increasing my mem to 512 if i can find something also can i convert it to usb2 as there seem to be more options?
View 1 Replies
View Related
Nov 26, 2007
I have a great G5 Dual Processor, and would like to add a PCI-X card to give me more Firewire connections. I have been all over the internet and made a lot of phone calls, but no one seems to have a clue as to where such a beast may be found. If not, are there any work-arounds?
Information:
G5
Mac OS X (10.4.10)
Run several Macs at work & home
View 2 Replies
View Related
Jun 6, 2009
I am looking for a SELF-Powered USB2.0/FW 400 external hard drive, does such a beautiful piece of hardware exist?
View 17 Replies
View Related
Oct 5, 2007
Have a powermac g5 tower w/o an airport card. It looks like it is a hassle to put in a airport card. I have free wireless in a new apartment and want to access it. Is there a cheaper way than getting a card placed and having the "board replaced" as well. Help line said it would cost several hundred dollars to upgrade this machine!
View 1 Replies
View Related
Jan 29, 2008
,A friend just recently purchased a NVIDIA Video Card and went to install it in his new Mac Pro but could not find a source to hook up additional power to the card. He called Apple and they weren't able to tell him how to connect to the Mac power supply.
Does the motherboard provide the necessary power so that he doesn't need to hook up the extra power cable to the card or does he need a booster cable etc?
View 8 Replies
View Related
May 17, 2009
I just installed 8GB in a early 2009 2.66 Quad (I know I'll lose triple channel) but now it looks like there is a red LED on the daughter board that blinks when the power button is pressed. It also blinks for a second when the computer shuts down.
If you have a surge protector, I know there are two red LEDs on the mother board that blink when the surge protector is switched on (right under the optical drive). I think those are normal since it's been that way from the very beginning. But I don't ever remember seeing the red LED on the daughter board light up when the power button is pressed. The LED is just left of the large heatsink, and it is not part of the LEDs associated with the RAM or Riser.
View 13 Replies
View Related
Nov 1, 2009
My eMac is now wired up to my home network, and i was wondering will the Apple Airport card fit my G5?
Any ideas?
Information:
Dual G5 2Ghz 4GB Radeon 9600 128mb WD 160GB Seagate 500GB - N4100+(2.8TB Raid5)
Mac OS X (10.5.8)
- eMac 1Ghz + 1.25Ghz - linux satellite box - xBox 360 - Emprex ME1 + 5pcs
View 9 Replies
View Related
Nov 4, 2009
I'm selling the ATI 4870 that came with my BTO 2009 Mac Pro. I assume the cables go with the card (otherwise it's useless) correct?
View 3 Replies
View Related
Jun 8, 2010
I'm referring to this thread here:
[URL]
There's 2 images that are missing so I'm a bit confused. It seems pretty basic but I have to ask just to make sure. The cables that came with my card looks exactly like the image in the post. It has 2 inputs PER cable. With the molex split, I'm guessing I plug only 1 in per cable, so does that mean the other input is left hanging with no connection? Is there a specific input on the cable that I use? I notice there's only 3 colors with yellow and black leading to different holes and the brown one leading to the same hole. It seems so basic, but so confused without the 2 missing pictures.
View 2 Replies
View Related
Feb 25, 2012
I inherited a Mac G5, Powermac 8,5 and I would like to connect it to my wireless router. I cannot seem to find exact info for this system. It does not have an built in capabilities.
Info:
PowerMac, Mac OS X (10.4.11)
View 6 Replies
View Related
Apr 22, 2012
so apparently my G5 needs a video card. I was not booting and wouldn't shut down. I reinstalled tiger but no difference. it will boot in safemode but I get lines across the display. they are in "groups of three" small squiggly lines.
Apple store says they think its video card but they will not support it because its "vintage"... I guess "computer years" are similar to dog years the card it came with is GeForce 6800 Ultra with 256mb ram. OWC has a Radeon 5770 with 1G of ram for 270.00 but this card is not compatible with my machine. it says it needs 10.6 or later... but I cannot upgrade the OS cuz leopard requires Intel processor.
so my question is, if a 1G card is 270.00... one that is compatible with my machine should be less I would think? also, even If I could find a compatible 1G card, I think it would be like having a Ferrari and only using 1st gear you know? cuz I would be bottle necked at the processors.. I would think? so what is compatible with the G5 but more ram than the current 256mb?
Info:
G5 Power Mac, Mac OS X (10.4.11), 2x 2.6Ghz DCPs, 8GB Ram, 4+TB storage Acer X243W
View 14 Replies
View Related
May 6, 2012
I bought a Referb 09 Mac Pro. I purchased a Gigabyte HD Radeon 6850. The Power cable that came with that card is obviously for a PC.I just need to know what cable I need and where I can get it?
Info:
Mac Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
May 28, 2012
I have a g5 which will not connect to my monitor as my monitor is adc and the g5 has 2 dvi connections its a 1.8ghz single processor g5 with 2gb memory. My friend has a dual processor mac with a dead hard drive and he says I can swap the video card as his has one dvi and one adc connection. He says its a nvidia card but he's not sure what one (came new on the g5 dual). Will this card work in my g5? Will save me getting an adaptor (expensive) or a new monitor.
Info:
PowerMac
View 2 Replies
View Related
Jun 11, 2012
I operate a Rollei studio camera system from n my MAC G4 on OS 10.4.1 through a SCSI card. I want to add another sytem but maybe run a G5 instead. if a Mac G5 on OS 10.5 will support a SCSI card?
View 2 Replies
View Related
Jun 28, 2012
I'm thinking of buying a G5 with a pci-e slot, does anyone know which cards, Apple original and PC flashable, can be used in this machine?
Info:
Mac OS X (10.5.8), Gainward Ultra 6800GT
View 2 Replies
View Related
Aug 12, 2007
Anyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
View 1 Replies
View Related
Feb 5, 2010
I recently bought a VANTEC NexStar 3 NST-360FBSU-BK. In the exclosure, I have a SATA drive capable of 3.0Gb/second. It's attached to my Late 2009 Mac Mini via FireWire 800. Based upon my understanding and in this situation, the FireWire should be the bottleneck. Therefore, I should be enjoying bandwidth somewhere shy of 800Mb/second. nfortunately, I'm not getting any where near that speed. I can transfer a 726MB file in 18.6 seconds. According to my math, that's ~5808Mb/18.6 seconds = ~312 Mb/second. This is not even FireWire 400 or USB 2.0 speed.For completeness sake, I also just upgraded from 2GB of ram to 4GB (both PC8500) but nothing seems negatively affected (in fact the computer is much, much more snappy!).
View 7 Replies
View Related
Apr 26, 2012
This is a weird one.. My USB ports will only recognise USB2 devices now and only if they are powered (my back up drive for instance). I've talked to Apple who believe it's the motherboard but shouldn't the ports have failed completely if that's so? Machine is a Macbook Pro 15" Intel Core i5 2.4 GHz running Snow Leopard (tried Lion but lost too many good apps under that system). Also if I unmount my external back up drive, it's not recognised again unless I restart or interrupt power to the external USB 2 drive. Almost like the old serial devices!
Did a total erase and reinstall of Snow Leopard 10.6.8, tried a powered hub and Apple had me do all the usual key combo resets all to no avail so it looks like I'm going to need a muthaboard. It just nags me that it still sees USB 2 only. How can it fail just a bit and then stay that way??
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
View 7 Replies
View Related
Jul 3, 2012
Can USB2 peripherals (hard drives, USB microphones, et al) be used with a MacBook Air that only has USB3 jacks?
View 4 Replies
View Related
Oct 2, 2007
Will the stock Mac Pro video card: NVIDIA GeForce 7300 GT, work in a PowerMac G5 Duallie 2.0 (mid 2004 model) with the pci-x slots? would a Cube G4 Rage 128 video card work in thePM G5? (I bought a G5 without a video card and I need to test it and find a cheap video card for it).
Information:
17" MacBook Pro 2.16/120/2gb ram
Mac OS X (10.4.10)
Mac Pro 2.66, 250 & 80gb hdd, 2 DL-SD, 7gn ram, APX & BT
View 1 Replies
View Related
Oct 14, 2007
The subject pretty much says it. Which PCI card to add a External Serial ATA Enclosure to a Dual G5 2.0 GHz? Looking at Sonnet there are PCI and PCI-X SATA/ATA cards.I'm looking to expand my storage and this was a recommendation.
Information:
G5 Dual 2.0 GHz
Mac OS X (10.4.6)
View 4 Replies
View Related
Dec 5, 2007
Since I updated to Leopard, some of my video and slideshow programs are lagging on screen. I have done a pretty good search on the forums here, but am getting some contradicting info. What is the fastest video card for my early 2005 G5 dual 2.0 with AGP 8x slot? ATI RADEON X800 Mac Edition Nvidia GeForce 6800 Ultra (what is the difference between the NVIDIA and the BFG cards?) I have an ATI Radeon 9650 with 256MB one single link and one dual link DVI. The ATI RADEON X800 Mac Edition has one ADC and one dual link DVI? Do both of those ports support a 30" Cinema HD display? My 9650 only supports one and it is in the 2nd port so it is annoying having my 23" be my main monitor and the 30" be the secondary.
Information:
G5 Dual 2.0 (early 2005) 3GB RAM ATI Radeon 9650 30" and 23" Cinema HD, Macbook Pro 2 GB RAM
Mac OS X (10.5.1)
View 3 Replies
View Related
Mar 28, 2008
I'm looking on cragslist right now for an older powermac to use as a media hub and I think I found one. It appears to be an AGP G4 PowerMac (500Mhz-ish). I have a 256MB graphics card I was using with my PC, I was wondering if I could plop it in and it would work? I know it's probably a pipe dream, but it doesn't hurt to ask
View 7 Replies
View Related
Feb 6, 2010
I'm upgrading to a Nvidia GeForce 8800GT graphics card on my 1st gen Mac Pro. I know how to install the card and that it needs aux power to work. The card has the aux power cable, but I'm not sure where to plug it in. There is a egg crate looking connector near the fan. Is this the aux power connector? There are two little prongs on the cable? Do these prong have to go into a specific side (i.e. positive and negative).
View 1 Replies
View Related
