I have a g5 which will not connect to my monitor as my monitor is adc and the g5 has 2 dvi connections its a 1.8ghz single processor g5 with 2gb memory. My friend has a dual processor mac with a dead hard drive and he says I can swap the video card as his has one dvi and one adc connection. He says its a nvidia card but he's not sure what one (came new on the g5 dual). Will this card work in my g5? Will save me getting an adaptor (expensive) or a new monitor.
,A friend just recently purchased a NVIDIA Video Card and went to install it in his new Mac Pro but could not find a source to hook up additional power to the card. He called Apple and they weren't able to tell him how to connect to the Mac power supply.
Does the motherboard provide the necessary power so that he doesn't need to hook up the extra power cable to the card or does he need a booster cable etc?
so apparently my G5 needs a video card. I was not booting and wouldn't shut down. I reinstalled tiger but no difference. it will boot in safemode but I get lines across the display. they are in "groups of three" small squiggly lines.
Apple store says they think its video card but they will not support it because its "vintage"... I guess "computer years" are similar to dog years the card it came with is GeForce 6800 Ultra with 256mb ram. OWC has a Radeon 5770 with 1G of ram for 270.00 but this card is not compatible with my machine. it says it needs 10.6 or later... but I cannot upgrade the OS cuz leopard requires Intel processor.
so my question is, if a 1G card is 270.00... one that is compatible with my machine should be less I would think? also, even If I could find a compatible 1G card, I think it would be like having a Ferrari and only using 1st gear you know? cuz I would be bottle necked at the processors.. I would think? so what is compatible with the G5 but more ram than the current 256mb?
Info: G5 Power Mac, Mac OS X (10.4.11), 2x 2.6Ghz DCPs, 8GB Ram, 4+TB storage Acer X243W
Will the stock Mac Pro video card: NVIDIA GeForce 7300 GT, work in a PowerMac G5 Duallie 2.0 (mid 2004 model) with the pci-x slots? would a Cube G4 Rage 128 video card work in thePM G5? (I bought a G5 without a video card and I need to test it and find a cheap video card for it).
Information: 17" MacBook Pro 2.16/120/2gb ram Mac OS X (10.4.10) Mac Pro 2.66, 250 & 80gb hdd, 2 DL-SD, 7gn ram, APX & BT
Just wondering, if I were to go for a higher specd Imac with a more powerful video card (thinking possibly the refurb with the 8800), would this be a significantly bigger energy drain, or does the card not kick in to full force unless a task requires it to do so?
Ok so I have a old Mac Performa 640CD/Dos that I am trying to to get up and running again. I had a monitor for it but it fell off the couch and broke. So I thought maybe I can use an adapter with it in order to use PC VGA monitor. Well after getting the first adapter and trying it, no luck, then I tried one that had dip switches on it. Tried 640 x 480, 800 x 600, almost all the dip switch combination with no luck on getting anything on the screen. Could it be that I might have a bad video card and it needs replaced? Or is this particular model not compatible with PC VGA monitors?
a friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
I hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Well I got rid of the quicksilvers since they died. Power supplys gave out and took the motherboards, So I sold what was left on EBAY.
My G4 Ethernet was sold to a co-worked and he is quite happy.
And I got this off ebay today:
Dual 1.8GHz PowerPC G5Procs 2GB RAM (2 x 1GB PC3200U DDR SDRAM) Pioneer DVD-RW DVR-117D Samsung HD160JJ/P 160GB SATA HDD (not apple labeled, not original to this system) (1) Power Cord pci106b,9 PCI Ethernet Controller
Well I didnt' read the fine print and BAZINGA! I noticed that it comes without a video card.
So For video editing, watching hulu and youtube and netflix What do you guys recommend.
I do have a PCI GEforce at home with 512 megs for PC and I was wondering if I could flash it and if so, does anyone know of a good walkthrough?
I see here that my Mac Pro (Early 2008) is compatable with:
ATI Radeon HD 2600 XT NVIDIA GeForce 8800 GT NVIDIA Quadro FX 5600 ATI Radeon HD 4870
It looks like in many cases there's two versions, and the mac version costs about 10x as much on ebay and in stores. Is that accurate, or is one of these models mac and pc compatable, and therefore the laws of supply and demand work in my favour?
(fyi: I just want the cheapest one, I don't do heavy GPU work)
I have a great G5 Dual Processor, and would like to add a PCI-X card to give me more Firewire connections. I have been all over the internet and made a lot of phone calls, but no one seems to have a clue as to where such a beast may be found. If not, are there any work-arounds?
Information: G5 Mac OS X (10.4.10) Run several Macs at work & home
Have a powermac g5 tower w/o an airport card. It looks like it is a hassle to put in a airport card. I have free wireless in a new apartment and want to access it. Is there a cheaper way than getting a card placed and having the "board replaced" as well. Help line said it would cost several hundred dollars to upgrade this machine!
I have a USB2 PCI card in my G4, and any devices plugged into it (mainly my iPod Shuffle) become unresponsive after a few minutes. For instance, I will be copying songs to my iPod, and halfway through, the copying process will drag to a halt. Burning CDs to a USB2 CD-RW often fail because the burn cannot complete. I have tried two different brands of USB2 cards with the same result.
Information: PowerMac G4 350 MHz AGP Mac OS X (10.3.9)
I just installed 8GB in a early 2009 2.66 Quad (I know I'll lose triple channel) but now it looks like there is a red LED on the daughter board that blinks when the power button is pressed. It also blinks for a second when the computer shuts down.
If you have a surge protector, I know there are two red LEDs on the mother board that blink when the surge protector is switched on (right under the optical drive). I think those are normal since it's been that way from the very beginning. But I don't ever remember seeing the red LED on the daughter board light up when the power button is pressed. The LED is just left of the large heatsink, and it is not part of the LEDs associated with the RAM or Riser.
There's 2 images that are missing so I'm a bit confused. It seems pretty basic but I have to ask just to make sure. The cables that came with my card looks exactly like the image in the post. It has 2 inputs PER cable. With the molex split, I'm guessing I plug only 1 in per cable, so does that mean the other input is left hanging with no connection? Is there a specific input on the cable that I use? I notice there's only 3 colors with yellow and black leading to different holes and the brown one leading to the same hole. It seems so basic, but so confused without the 2 missing pictures.
I inherited a Mac G5, Powermac 8,5 and I would like to connect it to my wireless router. I cannot seem to find exact info for this system. It does not have an built in capabilities.
I bought a Referb 09 Mac Pro. I purchased a Gigabyte HD Radeon 6850. The Power cable that came with that card is obviously for a PC.I just need to know what cable I need and where I can get it?
I operate a Rollei studio camera system from n my MAC G4 on OS 10.4.1 through a SCSI card. I want to add another sytem but maybe run a G5 instead. if a Mac G5 on OS 10.5 will support a SCSI card?
The subject pretty much says it. Which PCI card to add a External Serial ATA Enclosure to a Dual G5 2.0 GHz? Looking at Sonnet there are PCI and PCI-X SATA/ATA cards.I'm looking to expand my storage and this was a recommendation.
Since I updated to Leopard, some of my video and slideshow programs are lagging on screen. I have done a pretty good search on the forums here, but am getting some contradicting info. What is the fastest video card for my early 2005 G5 dual 2.0 with AGP 8x slot? ATI RADEON X800 Mac Edition Nvidia GeForce 6800 Ultra (what is the difference between the NVIDIA and the BFG cards?) I have an ATI Radeon 9650 with 256MB one single link and one dual link DVI. The ATI RADEON X800 Mac Edition has one ADC and one dual link DVI? Do both of those ports support a 30" Cinema HD display? My 9650 only supports one and it is in the 2nd port so it is annoying having my 23" be my main monitor and the 30" be the secondary.
Information: G5 Dual 2.0 (early 2005) 3GB RAM ATI Radeon 9650 30" and 23" Cinema HD, Macbook Pro 2 GB RAM Mac OS X (10.5.1)
I'm looking on cragslist right now for an older powermac to use as a media hub and I think I found one. It appears to be an AGP G4 PowerMac (500Mhz-ish). I have a 256MB graphics card I was using with my PC, I was wondering if I could plop it in and it would work? I know it's probably a pipe dream, but it doesn't hurt to ask
I'm upgrading to a Nvidia GeForce 8800GT graphics card on my 1st gen Mac Pro. I know how to install the card and that it needs aux power to work. The card has the aux power cable, but I'm not sure where to plug it in. There is a egg crate looking connector near the fan. Is this the aux power connector? There are two little prongs on the cable? Do these prong have to go into a specific side (i.e. positive and negative).
