I have a mac osx 10.4.6 and want to watch tv on it Iam having trouble finding tv for usb 1.Iwill be increasing my mem to 512 if i can find something also can i convert it to usb2 as there seem to be more options?
View 1 Replies
Problem is that all my back up is on a Iomega miniMax Ext HD that I backed up and cloned my old HD. Via FireWire. I've noticed that the new Macbook ONLY has USB 2. Will my EXT HHD still work.( It does have a USB2 connection). Obviously I wont want to be using my old OS ( Panther) But I do have quite a few app.s that I'd like to transfer to the new OS
View 1 Replies View RelatedI have a USB2 PCI card in my G4, and any devices plugged into it (mainly my iPod Shuffle) become unresponsive after a few minutes. For instance, I will be copying songs to my iPod, and halfway through, the copying process will drag to a halt. Burning CDs to a USB2 CD-RW often fail because the burn cannot complete. I have tried two different brands of USB2 cards with the same result.
Information:
PowerMac G4 350 MHz AGP
Mac OS X (10.3.9)
I am looking for a SELF-Powered USB2.0/FW 400 external hard drive, does such a beautiful piece of hardware exist?
View 17 Replies View RelatedAnyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
I recently bought a VANTEC NexStar 3 NST-360FBSU-BK. In the exclosure, I have a SATA drive capable of 3.0Gb/second. It's attached to my Late 2009 Mac Mini via FireWire 800. Based upon my understanding and in this situation, the FireWire should be the bottleneck. Therefore, I should be enjoying bandwidth somewhere shy of 800Mb/second. nfortunately, I'm not getting any where near that speed. I can transfer a 726MB file in 18.6 seconds. According to my math, that's ~5808Mb/18.6 seconds = ~312 Mb/second. This is not even FireWire 400 or USB 2.0 speed.For completeness sake, I also just upgraded from 2GB of ram to 4GB (both PC8500) but nothing seems negatively affected (in fact the computer is much, much more snappy!).
View 7 Replies View RelatedThis is a weird one.. My USB ports will only recognise USB2 devices now and only if they are powered (my back up drive for instance). I've talked to Apple who believe it's the motherboard but shouldn't the ports have failed completely if that's so? Machine is a Macbook Pro 15" Intel Core i5Â 2.4 GHz running Snow Leopard (tried Lion but lost too many good apps under that system). Also if I unmount my external back up drive, it's not recognised again unless I restart or interrupt power to the external USB 2 drive. Almost like the old serial devices!
Did a total erase and reinstall of Snow Leopard 10.6.8, tried a powered hub and Apple had me do all the usual key combo resets all to no avail so it looks like I'm going to need a muthaboard. It just nags me that it still sees USB 2 only. How can it fail just a bit and then stay that way??
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
Can USB2 peripherals (hard drives, USB microphones, et al) be used with a MacBook Air that only has USB3 jacks?
View 4 Replies View RelatedI have the 2007 intel mini and I am looking for hard drive options. Was thinking of installing a 320 gig 7200 drive in it but they are about the same price point as an external 1 TB 7200 3.5 drive. Is it possible to just run the mini off the external drive via firewire or USB2? Would that be slower than using the internal drive?
View 7 Replies View RelatedI have an external Lacie 1 TB hard disk which used to operate at USB2 speeds, but ever since I upgraded to my my Intel Mac Pro (from a G5) it only operates at USB1 speeds regardless of which USB port I plug it into. When I open up System Profiler, it reports "speed up to 12 Mb/sec" which of course is only USB1.1. It used to show "speed up to 480 Mb/sec". Do I need to reformat it something? Can I force it to connect at USB2 speeds?Â
Info:
Mac Pro, Mac OS X (10.6.8), 2 x 2.66 Dual Core
Just wondering if a USB3 cable CF card reader will work on on my USB2 port on my old Intel 24" white iMac?
Info:
24" iMAC
I am having difficulties burning 88.x MB DMG files to CDs (new CD-Rs and an old CD-RW) onto two different external USB2 disc burner drives (both have power AC connected: HP and LG Super brands). The new Mac Mini (no disc slot drive)'s updated 64-bit Mac OS X 10.7.4's Disk Utilities tries to burn and then fail right away or after a few seconds. The error says "Unable to burn 'whatever.dmg' (The disc drive did not respond properly and can't recover or retry." Nothing interesting in dmesg, but Disk Utility's logs had details:[URL].Â
I do see my drives' lights on during the burn. I can quick erase the old CD-RW fine. I can burn 538 MB from an 64-bit Windows 8 on my Acer AM3800 PC with the same discs and external burner drives without any problems. Also, I thought it was my USB cable extension, but it wasn't it. I don't use any USB hubs either. DMG files are fine too. I did notice copying from a CD to Mac Mini's local HDD was slow, but no failures.Â
I am having difficulties burning 88.x MB DMG files to CDs (new CD-Rs and an old CD-RW) onto two different external USB2 disc burner drives (both have power AC connected: HP and LG Super brands). The new Mac Mini (no disc slot drive)'s updated 64-bit Mac OS X 10.7.4's Disk Utilities tries to burn and then fail right away or after a few seconds. The error says "Unable to burn 'whatever.dmg' (The disc drive did not respond properly and can't recover or retry." Nothing interesting in dmesg, but Disk Utility's logs had details: url...I do see my drives' lights on during the burn. I can quick erase the old CD-RW fine. I can burn 538 MB from an 64-bit Windows 8 on my Acer AM3800 PC with the same discs and external burner drives without any problems. Also, I thought it was my USB cable extension, but it wasn't it. I don't use any USB hubs either. DMG files are fine too. I did notice copying from a CD to Mac Mini's local HDD was slow, but no failures.
View 8 Replies View RelatedAnyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
I have seen a few videos about mastering and gave it a try myself. It can be done by clicking the master tab, then going to the Input 1-2 column setting and then clicking setting - mastering, etc.When I first did this a few weeks ago, there were many options such as hip hop mastering, electronic mastering, etc.Now, when I do so, I have different - much less enticing options and have no idea where the good ones went.
I wonder if anybody knows how to convert flash files (swf/fla) to one of the standard files for video as in .avi, .mpeg or even .mov. I have exported via Flash 8, but the problem is: It doesn't keep the vectors function. so I have only a video with all flat images and no movement at all. It's just the program creating a bunch of jpeg and joining them all to create a movie effect.
View 28 Replies View RelatedI have a book that is separated into 1000 different swf files and i was wondering if there is any software that is able to batch convert them to pdf? Doing each one manually takes too long.
View 1 Replies View RelatedYeah, so I've been having some issues trying to convert .wmv files into files that I can place into idvd/imovie/etc (such as .mov or .avi) but I can't find any programs that accomplish this task. Bit of background, I'm a college student so obviously, money is tight - So I was curious as to if there is a freeware program (or even a shareware one) that will accomplish this task.
View 11 Replies View RelatedIs there any sotware on a Mac to convert FLV to MP3. I know PC have one but what about the Mac?
View 24 Replies View Related find a freeware program to convert a non-copyright WMA file into an MP3 I can import into my Mac's iTunes?
I looked on versiontracker and found 2 but one turned out to be a dumb demo that would only allow 12 seconds of conversion, and the other one looked like it was meant for something else
there is an easy way to batch convert a folder containing lots of Microsoft Word (.DOC) files to PDF format?
I know I could do this one-by-one in Word itself - but it would be very time consuming. I was hoping that there would be some part of the OS X system that could do this.
I've been searching and searching and all I can find is converters for PC, none compatible with MAC.
I've been recording my lectures with my phone and they play in quicktime but i have a couple others in my iTunes and i'd like to have them all together.
I have converted two .avi files on my MBP to the .iso file. Then I open up the two files and they become the Audio_TS and Video_TS folders. However, when I try and drag those to Toast, and try to burn the files, Toast always gives me an error. My question, how do correctly convert .avi files to dvd format so I can burn to a blank DVD? I want more than one .avi file converted to dvd format on each DVD.
View 10 Replies View RelatedI need a free converter to go from Avi to Mpeg.
View 4 Replies View RelatedCan someone please convert this to a doc file? I'm on campus and I didn't realize these macs do not have iWork.
View 2 Replies View RelatedI recently received a dvd from a meeting with lectures that are in flv format. I would like to convert them for use in iTunes so that they are accessible on the iPhone. A few issues:
The DVD is built in multiple folders. For example
Content / lecture 1204 / video / xxxxxx.flv
Content / lecture 5302 / video / xxxxxx.flv
So the first (and biggest) hurdle is whether I can easily 'grab' all of the flv files (buried in their respective folders) to one directory on my macbook. I then need some advice on converting the flv tracks to mp4 ones. I may opt to go the Quicktime Pro route unless handbrake is capable of this as well.
I transfer some doc files to mac, in order to view it, I need to convert to pdf. please recommend me some app which has this functionality.
View 24 Replies View RelatedI am an audio transcriptionist. I am new to mac. For my transcription I use a program called ExpressScribe [URL]. It works great on mac. I need this program because it allows me to use my foot pedal. Using a foot pedal increases my speed. Increased speed means increased salary. Here's the problem: I have a rush file due tomorrow. It came to me in an .wmv format. I cannot ask for it to be converted. This file automatically downloads into quicktime. I have to convert this file to an mp3 so I can open it with my ExpressScribe. I tried using "switch" (offered by the same company that brought me ExpressScribe), however because the file downloads automatically into quicktime I don't know what to do. I need to find a way to save this to my desktop as an mp3 or open it in itunes.
View 9 Replies View RelatedJust got my Macbook Pro a few weeks ago.... so I am new to this world. I was wondering if there is a free program or an easy way to convert Flac files to MP3's for my iPod or iPhone?
View 11 Replies View RelatedAll my Google searches give results on how to convert a WAV file to MP3 in iTunes...but iTunes 9 is different and the steps are not applicable. Anyone know how to do this?
View 3 Replies View Related
