Power Mac G5 :: External Hard Drive Fails To Show On Desktop?
Dec 19, 2007
My Maxtor 500 external hard drive has suddenly stopped appearing on my desktop. My other external drives appear. I've tried hooking the drive to my MacBook Pro with the same results. The drive however, seems 'active'. The light on the front of the drive does its usual flashing routine when plugged into a new machine. I've never had a crashed drive before. Does it sound like this is what has happened, or does anyone have a clue as to what I should do?
Since I tried to install Leopard and uninstalled it again as it has to many bugs (at least with my configuration) my external LaCie 500 Gb USB drive for back-up doesn't show on the desktop anymore. In disk repair the drive appears and repair shows "no problems". On an other internal disk I still have Leopard installed, and if I boot my G5 under Leopard the disk is visible and works fine.
Information: G5 1,8Ghz mono; MacBook black Mac OS X (10.4.10) Tiger again after Leopard uninstalled
My external drive has been used once. It was formatted, partitioned and files were saved on a mac. It showed up on a friends computer running Linux, and it showed up on my PC at home, but it hasn't been turned on since (about two weeks). This is where the problems begin. A few days ago I purchased a new enclosure for my HD (Nexstar 3.5). I took the HD out of it's old enclosure and put it in the new one (I needed the new enclosure for school purposes). I got to school today and plugged it in to the mac, but the drive didn't show up on the desktop. I tried to connect with Firewire 400, 800 and USB 2.0 but no luck with any of them (a USB key worked fine). Just to make sure it was working, I got home plugged it in to my PC and it showed up instantly.
From looking at other threads regarding this issue they all say I have to access the Utility menu. The only problem is since the mac I need to use is a school computer I can't access the Utility menu. It says I don't have authorization to use that menu, and won't allow me to go any further.
I don't know what to do from here. I can't reformat the drive because there is rather important info on there that hasn't been backed up yet. What can I do?
I have three external harddrives all of which are connected through different ports, all show up in finder, all show up in disk utility, but none of them will show up on my desktop. I looked at a few other posts similar to mine but the answers given to other problems have not worked. There is no way all three of my cords are causing a connection problem and I have repaired and verifyd all the drives and still nothing.
I have a Lacie Porsche 160 gb firewire drive, it worked well, I ve had it a couple of years. Now when I plug it in it won't show the disk image on the desktop. system profiler finds it and I have the Lacie upgrade tool and that checks it and says it is up to date. I have tried it on two other macbooks one older, one newer all Leopards, and one imac desktop. They all found it. so it appears to be a problem with my laptop only. I did use it with time machine but it ran out of space, Using another laptop I have deleted all lot of stuff off it and tried changing its name.
I have a problem with an external hard drive WD Elements, fails to recognize the password I entered. you have a tip on how to retrieve it? even if it leads to the formatting of HD ...
MacBook Pro; 2.8 GHz Intel Core 2 Duo; 4 GB 1067 MHz DDR3; OS X 10.6.8.
The Issue is a duplicate icon of the hard drive appeared on the desktop this AM upon startup.
I don't know what caused it. It just appeared.
It seems to contain everything the start up icon contains when I open it.
I moved it to the trash, but did not erase the trash. I chickened out, so to speak. I removed back to the desktop.
I have the desktop view set to arrange by date modified. It appears approximately half way down the list of icons showing on the desktop. It seems to me that, if it is a duplicate, and by all appearances it is, then it should appear immediately after the real hard drive icon.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.) I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error. I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes) Format :Mac OS ExtendedAvailable : Owners Enabled :NoUsed : Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
Disks I put in the Superdrive, external hard drives, or anything in the USB or Firewire (thumbdrive, etc) -- nothing shows up on the desktop. All are visible in Disk Utility. USB thumbdrives and external hard drives are visible in the sidebar in Finder, but disks are not (only disk utility).
Because of this I can't burn a disk because the disk is not being recognized. In Disk Utility, the external hard drives appear mounted and can be opened in Finder, but why aren't they appearing on my desktop (they used to)?
A few months ago my HP tablet pc just died on me, so that's when I decided to get a Mac.
Although, I needed to transfer the data and since my HP computer wouldn't get to the login screen; I was told to take out the hard drive, put it in an enclosure, and hook it up to my Macbook Pro.
I finally got around to getting an enclosure and hooked everything up. Now when I connected the hard drive to the Mac, it wouldn't show up on my desktop.
I did some searching around the internet, and there was some suggestions about the hard drive not being a "master" and I had to take out a plastic thing called a "jumper." The HP hard drive didn't have a jumper, so now I'm stumped on what to do next.
The hard drive enclosure I purchased was a 2.5" Rocketfish SATA HD Enclosure. aka; model RF-AHD25
I DID install Mac Fuse. Just not the driver needed to write on the hard drive, since I wasn't gonna write on it.
I have an old external hard drive (5yrs) that I used on a G4. I tried to plug it into my 10.5.8 and it will not register. I tried it on 3 different computers. I am tiring to use it for work (school teacher). I have an older Mac at work that it did show up on so I can get the info off.
i just bought an external hard drive enclosure for a new hard drive but it doesn't show up when i plug it into my macbook. the enclosure lights up with a blue status light when i plug in the USB but it never shows in disk utility and finder. leopard is installed on the external hard drive (im trying to clone my macbook's hd). i'm thinking its the enclosure but are there any steps i can take to ensure i'm doing everything correctly? the external hard drive is working, it was installed in my macbook yesterday but i took it out because time machine restoring fails also, i plugged the external into my time capsule. the blue status light turns on meaning its plugged in but i only see my time capsule in the network
What is the hard disk like inside these? Could I take the hard drive out of the enclosure and put it inside my Mac Pro? I have a friend who's WD Elements drive won't show up when she plugs it in, but I haven't seen it or messed with it first hand yet, so I don't know exactly what's going on. She says the light shows up and then goes away, and nothing else happens. If I fail to make it work through conventional means, how do I connect the drive to my Mac Pro in a way that bypasses the drives own AC Power system, which could be the faulty component?
I had a black screen of death moment and since then, I've had a few weird anomalies with my iMac. I ran disk repair while logged in, and it told me there was a problem. I restarted in restore mode, and when I repaired the drive, it found no problems. I don't believe it.
1. My external hard drives do not appear on the desktop. They are mounted, and I can see them when I open the finder and the disk utility, but they won't show up on the desktop like they used to. I have played with finder preferences shutting the option to see them off and on, but this doesn't change anything. Very strnage.
2. iTunes completely whacked out. It "restored" itself by magic. Now all the Date Added dates are March 23rd. All of my podcasts disappeared, and all my settings were reset. I have no idea what else I lost. I want to restore from a back up, but I don't know how to do just my iTunes.
I am a photographer. I use 4 X 1TB LaCie external hard drives to store my digital images. 2 as masters for different business segments and 2 as their back-ups. They are daisy-chained using Firewire 800. Recently my G5 has stopped recognizing one of the drives. Is there any way to get my machine to re-recognize the missing drive? I have rewired the four drives to see if there was a problem with the cabling, but this does not appear to be the case. I am coming up to the 1 year warranty period on this drive and need to get it back to LaCie if there is no other solution.
I moved mail from an exchange server to my computer to get around using to much space at work. I then dragged that folder to my desktop which created a .mbox file. When I try to move the .mbox file from my desktop to an external hard drive it wont move. a grey circle with an exclamation point appears. I tried doing it with Entourage close as well and got the same issue. Does anyone know the proper way for me to move the .mbox file from the desktop to the external hard drive?
I've just brought a new external Hard drive for my mac book pro and when I put the usb cable into the laptop nothing showed up on the desktop. I waited a few minutes but nothing happen and then I turned off the computer and did it again.
Could anyone recommend an external (FireWire 800) Hard Drive that they're using without issues with a Power Mac G5 (mine is a Dual Processor 2.3)?? I bought a couple of WD My Book Studio Edition but have no end of problems on FW800, and looking around here so is everyone else. LaCies seem to have similar problems, plus my own experiences in selling these and seeing FW ports falling off the enclosure's board, etc., puts me off them. Maxtors seem to have different issues and the new brown and orange Seagates are too fugly to even consider. So, anyone recommend a solution (250-500GB) that works fine with FW800 on a dual PMG5??
I have a PowerPC G4 running OSX 10.4.11 that contains a lot of media files. I want to transfer them to my external hard drive (1 tb) so that I can use them on my newer MacBook. I was unable to partition or erase anything on the external hard drive from the PowerPC, because I kept getting an input/output error. I followed the same process and was successful at establishing partitions on my MacBook. Now, I plugged my external into the PowerPC to copy the media files, but it isn't recognizing the partitions on the external harddrive! What did I do wrong?
I have one hard drive that is readable and writeable on my mac desktop but read only on my mac air. I am trying to transfer all files from a couple external hard drives onto a new larger back up drive so I do not want to lose any information by reformatting.
