Power Mac G5 :: Internal Hdd Disk Utility / It Will Be Completed In 1 Minute
Dec 3, 2007
I just installed a Hitachi 1TB drive in my dual 2.5ghz powerPC G5.
I carbon copied my old harddrive over to it.
I didn't want to reinstall my OS.
However I think I copied some problems over.
In Disk Utility when I try to Verify Disk Permissions, Verify Disk, or Repair Disk Permissions (any of the options I am allowed to do to the startup drive) it moves like 1/5th of the time bar meaning it is working then changes to "It will be completed in 1 minute" then stalls there.
Information:
Dual 2.5GHZ PowerPC Power Mac
Mac OS X (10.4.8)
30inch Apple Cinema Display, 4.5gb Memory, and 1.5TB of Harddrive.
View 2 Replies
ADVERTISEMENT
Aug 28, 2014
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
View 3 Replies
View Related
Jun 27, 2009
"Disk Utility has lost its connection with Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility".
I keep getting this error when trying to erase an external hard drive with Disk Utility. When I restart, the error appears again. I've seen others with this problem but haven't found a solution. I've tried removing iTunes from Applications and deleting select iTunes receipts.
I'm running OS 10.4.11
View 1 Replies
View Related
Nov 3, 2010
I have a 2009 13 inch macbook pro with 2.4 ghz processor, 4 gb ram, all stock from apple. Machine has been working great until 2 days ago when my system froze, had to push the power off button, tried to reboot but got the flashing folder and the internal hard drive was no longer recognized. I did all the usual things and read the apple support page to no avail. I booted from the install CD and the drive is not recognized in disk utility. I took the drive out, put it in an external case and booted from there and the drive appears to be working.
I put in another internal drive, a Hitachi 500 GB/7200 RPM that looks mac compatible, disc utility will not even recognize it either with the external hard drive OS running or from the install CD. In system profiler, under hardware, it says this computer doesn't contain any ATA drives. Could this be a problem with the SATA cable internally? The rest of the logic board appears to be working as I am typing this on the affected machine running the OS from my former internal hard drive that is now in a casing.
View 5 Replies
View Related
Jun 5, 2009
I have had a problem for about a month whereby my MBP won't shut down, it just hangs after it has cleared the desktop and only the wallpaper is displayed. Now disk utility won't see the disk at all, and Software Update also does not find any updates. It checks for new software for ever. My mac starts up fine, and I can use it as normal.
View 5 Replies
View Related
Jun 24, 2008
I just replaced the internal hard drive on my G4 iBook. My problem is the drive is not showing up in Disk Utility, the system install disk, or when I have the iBook in target mode and connected to my tower. I believe the old drive had died. When I ran the Hardware Test on it, I received an error code on Mass Storage. After installing the new drive and running the Hardware Test, the Mass Storage passed. I take that as a good sign.?
Before cracking the iBook back open, I was wanting to find out what all the problem may be and what things to check while I have it open since that is not that quick of an operation. I'm already assuming to check the connections on the drive. But if they weren't secure, would it still pass the Hardware Test?
View 7 Replies
View Related
Mar 18, 2009
Having a major issue: similar symptoms to others in the forum - with the fan and the computer not getting past the grey apple screen, I booted from the install disk and got to disk utility, at first all options were greyed out and I could not do anything, tried again a few times and finally got to the point where I could run the verify utility, never given the option to repair. When running the utility it failed and said I needed to repair by booting from the install disk and running the disk utility? Going around in circle here - any advice? I am currently running the Apple Hardware test to see if that shows anything...it has been a workhorse and I've NEVER had any issues with it.
Information:
PowerMac G5 Dual 2Ghz
Mac OS X (10.5.1)
4G RAM
View 1 Replies
View Related
Jan 21, 2010
When I go into first aid in disk utility, and click on my system drive, the verify button is grayed out.
If I remembered correctly, I was able to verify my system drive before.
Information:
MacBook Pro 2.16
Mac OS X (10.4.9)
View 3 Replies
View Related
Dec 28, 2010
However, my hard drive appears to be running fine - haven't noticed any degradation of performance since receiving the warnings two days ago. And HD is still running quiet (no strange mechanical noises I'm accustomed to hearing prior to a failure). Nevertheless, I'm installing a new HD tomorrow and recloning it from a backup external drive (operating from external until then).
View 4 Replies
View Related
Apr 8, 2008
I tam trying to add a 75 GB partition to my aluminum iMac's internal HD using Leopard's Disk Utility, but after 7 hours the striped bar appears not to have made any progress and still says "Modifying Partition Map". How long does this usually take? Is this normal?
View 16 Replies
View Related
Apr 30, 2012
The internal card reader on my MacBook Pro 13" (5/2011) worked just fine until a few weeks ago.Today however it left me in the cold.The SD card that I normally use does not show up anywhere, not even in Disk Utility. Other SD cards don't show up neither. There was no pbm accessing the data using an old Windows PC.A user friendly Sofware Function Test of the Internal Card Reader could give a quick answer where to look for error.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 17, 2007
I have a G4 PowerMac with two 80 GB hard drives. When I boot up the computer, it boots up from the primary drive and runs fine. At this time, both my primary and my secondary drives are accessible and visible.However, when I boot up the computer using either the Tiger or Leopard DVDs and then run Disk Utility, it only recognizes my secondary hard drive and not my main hard drive.
View 5 Replies
View Related
Feb 17, 2012
933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.
View 2 Replies
View Related
Dec 7, 2007
Thinking of using 500GB and 750GB internal drives for a raid 0 startup disc (software raid obviously)?
Information:
Dual 2.5 G5
Mac OS X (10.4.11)
View 3 Replies
View Related
Apr 15, 2009
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
View 14 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
Nov 10, 2007
I want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
View 3 Replies
View Related
Apr 30, 2012
tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
View 2 Replies
View Related
Oct 7, 2010
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
View 2 Replies
View Related
Nov 25, 2009
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 24, 2014
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies
View Related
Jan 2, 2010
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
View 1 Replies
View Related
Oct 9, 2010
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
View 8 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
Jan 9, 2010
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
View 7 Replies
View Related
Aug 3, 2010
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
