Power Mac G5 :: Using Disk - Utility Verify Disk Fails
Mar 18, 2009
Having a major issue: similar symptoms to others in the forum - with the fan and the computer not getting past the grey apple screen, I booted from the install disk and got to disk utility, at first all options were greyed out and I could not do anything, tried again a few times and finally got to the point where I could run the verify utility, never given the option to repair. When running the utility it failed and said I needed to repair by booting from the install disk and running the disk utility? Going around in circle here - any advice? I am currently running the Apple Hardware test to see if that shows anything...it has been a workhorse and I've NEVER had any issues with it.
Information:
PowerMac G5 Dual 2Ghz
Mac OS X (10.5.1)
4G RAM
View 1 Replies
ADVERTISEMENT
Jan 21, 2010
When I go into first aid in disk utility, and click on my system drive, the verify button is grayed out.
If I remembered correctly, I was able to verify my system drive before.
Information:
MacBook Pro 2.16
Mac OS X (10.4.9)
View 3 Replies
View Related
Apr 15, 2009
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
View 14 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
May 10, 2010
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD.
When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive.
The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too.
So far, I haven't had any other unusual things with the operation, but I'm concerned that this could be an early warning of problems to come.
Has anyone else had this problem or have a clue?
I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there. I hope someone will have a direct solution to repairing the drive without doing all of that.
View 2 Replies
View Related
Jan 7, 2009
I have an USB external HD attached to Time Capsule. Trying to find out how one can use diskutil to do a verifyVolume on this drive. I tried something like: diskutil verifyVolume /Volumes/myDrive but it didn't work. The command is (naturally) ok with an USB external HD attached to the USB port on the Mac itself.
View 4 Replies
View Related
Jun 2, 2009
I have a MacBook and last night it froze for a while, so I manually shut it down. When I tried to turn it on, it went to the white screen with the folder and flashing question mark. I don't know how to fix computers at all, so I looked online and it said to put the disc in. I went to disc utility and it shows the hard drive, but it is not as bright as the install disc.. does that mean it cannot be found? What should I do? I tried to reinstall the disc to my hard drive with the option checked to keep my old settings, etc but it did not work. Most of my stuff is not backed up so if there is any way I can try to save it before I try to reload the hard drive would be really great.
View 1 Replies
View Related
Dec 26, 2010
So between today and yesterday I have just been doing some casual maintenance with my Mac Mini. I decided I would run the First Aid program in utilities just to make sure everything is doing well. I was just wondering what is the difference between the two options "Verify Disk" and Verify Disk Permissions"- what exactly do each of them do? It almost sounds self-explanatory but can someone shed some light for me?
I've ran all the verification tests on each hard drive I have and repaired them when needed. So far it has only been my external WD hard drive that needed to have a repair, though I didn't notice anything wrong with it prior to running the verification test. Basically, I'm just wondering what each of the functions do.
View 2 Replies
View Related
Sep 11, 2009
When I used Disk Utility to verify my LaCie disk, I received this message:
Disk Utility stopped verifying "LACIE" because the following error was encountered:
The underlying task reported failure on exit.
View 4 Replies
View Related
Apr 19, 2012
I try to insert my hard drive and it says "the disk inserted is not readeable by this computer" but when I open disk utility to repair it says "First Aid failed, Error: filesystem verify or repair failed". I am very frustrated, my work is due next week and most of it is in the drive.
Info:
iMac
View 1 Replies
View Related
Jun 16, 2012
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
May 19, 2012
I have the "show detail" box checked but Disk Utility is not showing detail. It goes through verify and repair, says it is finished, but shows no files. I have never had No files need repair. My computer has been slow and erratic and usually running Disk Utility works, but not now.
Info:
iMac, Mac OS X (10.7.1)
View 6 Replies
View Related
Jun 25, 2012
I ran Disk Utility and before it finished I received Filesystem verify or repair failed error message. It says to run repair but I can'tÂ
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
Jun 23, 2010
Seems that I have messed up my Macbook Pro hark disk. Opening disk utility on macosx 10.5.8 shows that my disk in partitioned as this:
1)Macintosh HD
2)Apple_HFS disk0s3
3)Linux Swap
All of them appear to formatted as Mac OS extended (journaled) although the Linux Swap partition appears as Unmounted and cant be mounted nor use first aid on it. the others 2 appear to ok on verify disk test. What I want to do is remove partition 2 and 3. As I mention disk utility fails both under macosx and also when i use it booting from Mac OS X install disk. Should I use something like g-parted to boot from and re arrange my partitions or will this further mess up my disk? will MBR be affected?
View 1 Replies
View Related
Aug 19, 2010
So between today and yesterday I have just been doing some casual maintenance with my Mac Mini. I decided I would run the First Aid program in utilities just to make sure everything is doing well. I was just wondering what is the difference between the two options "Verify Disk" and Verify Disk Permissions"- what exactly do each of them do? It almost sounds self-explanatory but can someone
I've ran all the verification tests on each hard drive I have and repaired them when needed. So far it has only been my external WD hard drive that needed to have a repair, though I didn't notice anything wrong with it prior to running the verification test. Basically, I'm just wondering what each of the functions do.
View 1 Replies
View Related
Apr 9, 2012
My Power Mac froze, and won't boot. I'm running 10.4. No recent changes, downloads, or updates. Safe mode won't work. freezes on grey start up screen. System CD in drive, won't boot from holding down "c" held down option and selected CD and finally got to disk utility.
Now, when I try to run utility to repair permissions, I get an error stating "disk utility has lost its connection with the disk management tool and cannot continue. Please quit and relaunch disk utility" happens over and over.
When I try to repair disk, I get a red line saying "reserved fields in the catalog record have incorrect date, keys out of order. The volume could not be repaired". Error: The underlying task reported failure on exit (-9972). 1 volume could not be repaired.
Info:
powermac G5 2.5g ram 23 flat screen, Mac OS X (10.4.11)
View 8 Replies
View Related
Nov 17, 2007
I have a G4 PowerMac with two 80 GB hard drives. When I boot up the computer, it boots up from the primary drive and runs fine. At this time, both my primary and my secondary drives are accessible and visible.However, when I boot up the computer using either the Tiger or Leopard DVDs and then run Disk Utility, it only recognizes my secondary hard drive and not my main hard drive.
View 5 Replies
View Related
Feb 17, 2012
933 mhz quicksilver primary HD which has 10.5.8 installed, won't mount and disk utility cannot repair, have second HD with 10.5.8 installed, but need primary to mount to retrieve data.
View 2 Replies
View Related
Dec 3, 2007
I just installed a Hitachi 1TB drive in my dual 2.5ghz powerPC G5.
I carbon copied my old harddrive over to it.
I didn't want to reinstall my OS.
However I think I copied some problems over.
In Disk Utility when I try to Verify Disk Permissions, Verify Disk, or Repair Disk Permissions (any of the options I am allowed to do to the startup drive) it moves like 1/5th of the time bar meaning it is working then changes to "It will be completed in 1 minute" then stalls there.
Information:
Dual 2.5GHZ PowerPC Power Mac
Mac OS X (10.4.8)
30inch Apple Cinema Display, 4.5gb Memory, and 1.5TB of Harddrive.
View 2 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
Oct 7, 2010
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
View 2 Replies
View Related
Nov 25, 2009
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!Â
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.Â
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 24, 2014
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies
View Related
Jan 2, 2010
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
View 1 Replies
View Related
Oct 9, 2010
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
View 8 Replies
View Related
Jan 9, 2010
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
View 7 Replies
View Related
Aug 3, 2010
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
