"Disk Utility has lost its connection with Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility".
I keep getting this error when trying to erase an external hard drive with Disk Utility. When I restart, the error appears again. I've seen others with this problem but haven't found a solution. I've tried removing iTunes from Applications and deleting select iTunes receipts.
I'm running OS 10.4.11
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
I have a 2009 13 inch macbook pro with 2.4 ghz processor, 4 gb ram, all stock from apple. Machine has been working great until 2 days ago when my system froze, had to push the power off button, tried to reboot but got the flashing folder and the internal hard drive was no longer recognized. I did all the usual things and read the apple support page to no avail. I booted from the install CD and the drive is not recognized in disk utility. I took the drive out, put it in an external case and booted from there and the drive appears to be working.
I put in another internal drive, a Hitachi 500 GB/7200 RPM that looks mac compatible, disc utility will not even recognize it either with the external hard drive OS running or from the install CD. In system profiler, under hardware, it says this computer doesn't contain any ATA drives. Could this be a problem with the SATA cable internally? The rest of the logic board appears to be working as I am typing this on the affected machine running the OS from my former internal hard drive that is now in a casing.
I have had a problem for about a month whereby my MBP won't shut down, it just hangs after it has cleared the desktop and only the wallpaper is displayed. Now disk utility won't see the disk at all, and Software Update also does not find any updates. It checks for new software for ever. My mac starts up fine, and I can use it as normal.
View 5 Replies View RelatedI just replaced the internal hard drive on my G4 iBook. My problem is the drive is not showing up in Disk Utility, the system install disk, or when I have the iBook in target mode and connected to my tower. I believe the old drive had died. When I ran the Hardware Test on it, I received an error code on Mass Storage. After installing the new drive and running the Hardware Test, the Mass Storage passed. I take that as a good sign.?
Before cracking the iBook back open, I was wanting to find out what all the problem may be and what things to check while I have it open since that is not that quick of an operation. I'm already assuming to check the connections on the drive. But if they weren't secure, would it still pass the Hardware Test?
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I just installed a Hitachi 1TB drive in my dual 2.5ghz powerPC G5.
I carbon copied my old harddrive over to it.
I didn't want to reinstall my OS.
However I think I copied some problems over.
In Disk Utility when I try to Verify Disk Permissions, Verify Disk, or Repair Disk Permissions (any of the options I am allowed to do to the startup drive) it moves like 1/5th of the time bar meaning it is working then changes to "It will be completed in 1 minute" then stalls there.
Information:
Dual 2.5GHZ PowerPC Power Mac
Mac OS X (10.4.8)
30inch Apple Cinema Display, 4.5gb Memory, and 1.5TB of Harddrive.
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD.
When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive.
The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too.
So far, I haven't had any other unusual things with the operation, but I'm concerned that this could be an early warning of problems to come.
Has anyone else had this problem or have a clue?
I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there. I hope someone will have a direct solution to repairing the drive without doing all of that.
I just got my computer yesterday and when running the "repair disk" function, I already get an error! Since I used migration assistant to move everything off my old mac to my new mac, I'm not interested in reinstalling the whole OS and transffering all my files again. This is a new computer, and shouldn't have this problem this early. I also get the same result when starting up in the recovery partition. How do I resolve this?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
However, my hard drive appears to be running fine - haven't noticed any degradation of performance since receiving the warnings two days ago. And HD is still running quiet (no strange mechanical noises I'm accustomed to hearing prior to a failure). Nevertheless, I'm installing a new HD tomorrow and recloning it from a backup external drive (operating from external until then).
View 4 Replies View RelatedI tam trying to add a 75 GB partition to my aluminum iMac's internal HD using Leopard's Disk Utility, but after 7 hours the striped bar appears not to have made any progress and still says "Modifying Partition Map". How long does this usually take? Is this normal?
View 16 Replies View RelatedThe internal card reader on my MacBook Pro 13" (5/2011) worked just fine until a few weeks ago.Today however it left me in the cold.The SD card that I normally use does not show up anywhere, not even in Disk Utility. Other SD cards don't show up neither. There was no pbm accessing the data using an old Windows PC.A user friendly Sofware Function Test of the Internal Card Reader could give a quick answer where to look for error.
Info:
MacBook
Pro, Mac OS X (10.6.8)
i'm trying to format a spare external, it's currently formatted to ms-dos for back up dutys on my PS3 but i want to change it to mac os extended
i've just plugged the drive in ( USB ), nothings running on it, or open on the computer from the drive, but disk utility wont erase it, i've checked permission and everythings fine but it just keeps giving me this error
google and apple fail, only thing i can find linked to it refers to operating systems running on the drive,
I get this (screenshot) when I try verify disk in Disk utility.
View 7 Replies View RelatedI ran a fix permissions today, and got the following errors. I have no idea what they mean, and am a bit concerned. Anybody have any idea what this stuff means?...
View 4 Replies View RelatedI clicked "Verify Disk" and i got that, the other two options worked. I read up on this on Apple's site but I am not having any other issues than the notice. I was told to run Disk Utility ever so often to keep my mac fast. I just happened to do it today and I got that. I am trying to avoid having to do ANY sort of reformat.. I don't have any means of backup. Like I said I am not having any other problems. I am able to restart and log in without any problems. Should I be worried about this since there is no other issues besides the notice itself?
View 17 Replies View RelatedI installed Ubuntu on my iMac, and it made 2 new partitions: DISK0S3 and Linux Swap. Here's what my disk utlity looks like: When I try to remove Linux Swap, it says that the partition (map is too small. When I try to remove DISK0S3, nothing happens and it keeps running forever before I press +Q to quit.
View 1 Replies View RelatedI have spent all day with a colleague wrestling with a 4 and 1/2 year old G5 tower that has been throwing up all sorts of cranky errors. (i.e. firefox crashes, flash crashes, programs wont load, itunes stops working, firewire drives make it insane). As part of the diagnostic flow, I attempted to verify permissions on the core HD. Disk utility only took a couple seconds to determine that there is some unknown error with the HD, and it cant continue. This leads me to believe that we are dealing with a flailing drive, which very well MAY be the root of the problems! Time to make an external clone onto a fresh HD, and see if that helps.
Install CCC 3. Open CCC 3, it hiccups on the dock, and then nothing. *roll eyes*. Install super duper. Run super duper. Now super duper refuses to let me make a bootable clone of the core HD? Fine, if that is how you want to play this game. I get two SATA enclosures. Put the suspect drive in one, and then a fresh drive in the other. Plug both into my MBP where i run a CCC bootable clone. Couple hours later, it is complete. Plug the new clone into the G5 tower, and it does not see it as a bootable drive. Okay, lets try the CCC clone again. Same result. I am desperate for options.
I am desperately trying to burn a ISO file to a USB and external HD but Disk Utility does not want to. Instead I get the error message "Could not validate source - error 254". So there must be a problem with the source which is the ISO file.
I already tried setting the Partition Map Scheme to both Master Boot Record and GUID Partition Table. I also formatted the drive to FAT and HFS+. I cannot find the cause of this error. It clearly looks like Disk Utility does not like burning ISOs to USBs or HDs.
However, I really really need to this since I cannot burn ISOs with my SuperDrive which is also a common problem [URL]with my MacBook Pro.
I just restore my Mac OS to a single partition and then I tried re-partitioning but it's giving me an error.
I've tried several times, tried using different sizes every time. My HD's capacity is 250GB, and I've got 108.95GB free. So I am sure that making a new partition of 35 - 40 GB is not a big deal. I also tried using Disk Utility, both from the Mac OS install disc and while using the Mac OS itself, but it keeps giving me this error. I do not want to format my Macintosh HD's partition because I don't have an external HDD on me at the moment so I will not be able to back up. I have a lot of important data that can not be deleted.
I am trying to format a SDHC card on my MBP. I am trying to create a recovery SDHC disk for my MBP.
The disk is a Transcend 16gb (class 10).
I formatted to Mac OS Extended (Journaled) w/ a GUID Partition Table but after this, Disk Utility is now showing only 10.38 gb of usable space, but finder is showing me the full amount (15.79 gb). When I look in finder there are NO files or folders on the drive.
I tested trying to put more than 10.38 gb worth of files on the disk and was told there was not enough space. If I format the disk to anything other than Journaled, I get the full 15.79 gb. Has anyone ever experienced this before?
I bought a 1TB Iomega Prestige drive, it worked great for a few months. Started making loud clicking sounds. Iomega sent me a replacement drive (refurbished).
I am using it as my time machine backup in Leopard, so it was really just a matter of plugging it in, formating it with the OSX file system and setting it up for time machine.
When attempting to format from Disk Utility, I get an error (see screenshot).
(Additional info: I can access it and format it without any problems from Windows 7 based PC).
Volume Header needs minor repair. The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked Volume needs repair
(above)
after running 'Verify Disc Permissions' this message came.
ibook G4
1.33 PowerPC G4
1 GB Ram
10.4.11
After upgrading to 10.5.7, numerous permission errors highlight regularly in Disc Utility, which I run weekly (probably for too often). I never saw these with 10.5.6, or for that matter any earlier incarnation of the OS. I have also noticed progammes hanging more than before (especially Mail). I have run DiskWarrior and that didn't report anything untoward. Should I give up worrying about this and maybe join the Foreign Legion instead?
View 7 Replies View RelatedI have a G4 powerbook from around 2004 that was running slow so I tried updating the mac software since I hadnt done it in a while after downloading and installing the suggested items my computer has gone a lil crazy. First off i noticed my dock is completely missing and I've tried numerous things to fix it that were suggested to me but nothing has worked.
Next I attempted to do some restoring using disk utility that had also been suggested and it turns out disk utility wont even run I get the error message "You cannot open the aplication "disk utility" because it may be damaged or imcomplete". This message also appears when i attempt to open safari or itunes.
I am no longer able to find my restore discs so I dont have that option at the moment, any help would be greatly appreciated, I am about to go back to school to pursue another degree and not having to buy a new comp would be great news.
here are the items that were installed with the update:
2009-10-25 17:23:21 -0600: Installed "Java for Mac OS X 10.4, Release 7" (1.0)
2009-10-25 17:23:47 -0600: Installed "Migration and DVD/CD Sharing Update" (1.1)
Steps to reproduceOpen Disk Utility Drag an ISO image into the left sidebar Insert an USB Stick with enough space to contain the image Go to any restore tab in Disk Utility Drag the ISO file to the source Drag the Volume from the USB drive to the destination Check erase destination Hit restore
Results for me are (in any number of varieties to do this) either "Invalid argument" or in the log "Could not validate source - error 254".
what utilitiy fixes this?
full error:
Verifying volume �Macintosh HD�
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid leaf record count
(It should be 623360 instead of 623358)
Checking volume information.
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
I am trying to create a new image from a DVD and burn it to a new DVD using the MAC Disk Utility "New Image" option. The source DVD is 4 G and my target folder is on my external HD which has 298G.. plenty of space. However, whenever I attempt to SAVE the existing DVD to my external HD, I am getting the error message that the file is too large. I have tried the parameter for "Image Format" of both 'Read Only' and 'DVD/CD Master' and neither of them work. My "Encryption" setting is 'None'.
View 7 Replies View RelatedI can't seem to get my mac to start up, it won't get past the gray screen with the apple logo and spinning wheel. I have tried to use utility disk to fix the problem but it kept coming up with error- could not complete. It would also not see the hard drive in OSX 10.4 when trying to archive before re- installing. So we opened it in OS 9 which worked and we could see the hard drive. We restarted the mac in OS 9 in the hope that we could re- install OSX 10.4 from there. It will go right through the installation but comes up with error again when validating.
View 1 Replies View RelatedThe last couple of days safari has been crashing pretty frequently for me. I've been using chrome no problem, but i do prefer safari, so I just googled it and got pointed to Repair Permissions in Disk Utility.
So I just opened Disk Utility, which I'm fairly sure I've never used before, and it's saying, under my HD "this drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
It's saying it for both "FUJITSU MHZ2250BH FFS G1 Media" (I'm not even sure what that is) and "Macintosh HD".
There's nothing wrong with my computer? I've googled around and apparently this means my machines about to die?
