Hardware :: New Internal HD Not Showing In Disk Utility
Jun 24, 2008
I just replaced the internal hard drive on my G4 iBook. My problem is the drive is not showing up in Disk Utility, the system install disk, or when I have the iBook in target mode and connected to my tower. I believe the old drive had died. When I ran the Hardware Test on it, I received an error code on Mass Storage. After installing the new drive and running the Hardware Test, the Mass Storage passed. I take that as a good sign.?
Before cracking the iBook back open, I was wanting to find out what all the problem may be and what things to check while I have it open since that is not that quick of an operation. I'm already assuming to check the connections on the drive. But if they weren't secure, would it still pass the Hardware Test?
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.Â
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
"Disk Utility has lost its connection with Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility".
I keep getting this error when trying to erase an external hard drive with Disk Utility. When I restart, the error appears again. I've seen others with this problem but haven't found a solution. I've tried removing iTunes from Applications and deleting select iTunes receipts.
I have a 2009 13 inch macbook pro with 2.4 ghz processor, 4 gb ram, all stock from apple. Machine has been working great until 2 days ago when my system froze, had to push the power off button, tried to reboot but got the flashing folder and the internal hard drive was no longer recognized. I did all the usual things and read the apple support page to no avail. I booted from the install CD and the drive is not recognized in disk utility. I took the drive out, put it in an external case and booted from there and the drive appears to be working.
I put in another internal drive, a Hitachi 500 GB/7200 RPM that looks mac compatible, disc utility will not even recognize it either with the external hard drive OS running or from the install CD. In system profiler, under hardware, it says this computer doesn't contain any ATA drives. Could this be a problem with the SATA cable internally? The rest of the logic board appears to be working as I am typing this on the affected machine running the OS from my former internal hard drive that is now in a casing.
I have had a problem for about a month whereby my MBP won't shut down, it just hangs after it has cleared the desktop and only the wallpaper is displayed. Now disk utility won't see the disk at all, and Software Update also does not find any updates. It checks for new software for ever. My mac starts up fine, and I can use it as normal.
I've been having trouble with my Western Digital 160GB HD, its one of the MyPassport ones or what not. It used to work like a charm and had for a while but a couple of days ago it just stopped being able to be read or even recognized on Macs. I tried this laptop and another macbook pro and both would not show the HD on the desktop or even Disk Utility. When I open the Disk Utility when the ExHD is plugged in, I just get that loading circle and it will just do that indefinitely. Same thing with System Profiler as well.
I don't believe I damaged it in anyway, I hear no clicking and it seems to "boot" smoothly when it's plugged in, so would this mean its a corruption issue? I have been plugging this in to different Macs recently, (3 total) and one of which runs Leopard while the other two run Tiger. Would that cause the issue? (the reason I ask is that this all started after I had plugged it into the different OS.) I haven't tried to plug it into a PC yet, i'm going to do that today but I had tried doing the CMD + Option+ P + R reset till the second beep and I also did a hard reset by unplugging everything and waiting a bit then holding the start button down until it beeps.
I was going to run Disk Permissions and when I opened it up, there is a decrypted file.dmg showing. Here is it's path:/var/folders/2d/vmlqi1 d0gzcs7mxi nnl 1w0000gn/T /decryptedFile.dmg...I opened it and saw that it has something to do with installing Adobe Flash Player. I remember downloading and installing it a couple of days ago. I've adonw this previously, but never had the disk image show up in Disk Utility before. How can I get rid of it? It seems to be in a folder calledl "T" that I can't find anywhere.
Info: MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
When I start my mac I get the folder with the question mark on it. I put in start-up disk and ran disk utility put doesn't show the HD anywhere, does that mean its dead? I need to recover that drive and get it fixed fast.
I just installed a Hitachi 1TB drive in my dual 2.5ghz powerPC G5.
I carbon copied my old harddrive over to it.
I didn't want to reinstall my OS.
However I think I copied some problems over.
In Disk Utility when I try to Verify Disk Permissions, Verify Disk, or Repair Disk Permissions (any of the options I am allowed to do to the startup drive) it moves like 1/5th of the time bar meaning it is working then changes to "It will be completed in 1 minute" then stalls there.
Information: Dual 2.5GHZ PowerPC Power Mac Mac OS X (10.4.8) 30inch Apple Cinema Display, 4.5gb Memory, and 1.5TB of Harddrive.
I am using a Mac Mini, Which is having a capacity of 74.2 GB. Hardly I made use of 15 or 16 GB of that. As I felt some slowness, I tried running "Disk Utility". Recently I found that the free space is only 2.4GB, instead of around 55GB..
Disk Utility is showing USED SPACE :71.8GB
If i am calculating all folders in "Machintosh HD" (Application, Library,System, etc..), it wil come around 14-15 GB only.
my HD fried so I just installed a new 250GB HD about 20mins ago. It's not showing up on the disk utility. It shows one for 4.8GB but not the 250GB? bad connection? I'll try to reconnect it again. It's a Seagate, same brand as I took out of my 1.66 intel Mac mini.
However, my hard drive appears to be running fine - haven't noticed any degradation of performance since receiving the warnings two days ago. And HD is still running quiet (no strange mechanical noises I'm accustomed to hearing prior to a failure). Nevertheless, I'm installing a new HD tomorrow and recloning it from a backup external drive (operating from external until then).
I tam trying to add a 75 GB partition to my aluminum iMac's internal HD using Leopard's Disk Utility, but after 7 hours the striped bar appears not to have made any progress and still says "Modifying Partition Map". How long does this usually take? Is this normal?
The internal card reader on my MacBook Pro 13" (5/2011) worked just fine until a few weeks ago.Today however it left me in the cold.The SD card that I normally use does not show up anywhere, not even in Disk Utility. Other SD cards don't show up neither. There was no pbm accessing the data using an old Windows PC.A user friendly Sofware Function Test of the Internal Card Reader could give a quick answer where to look for error.
I have two USB cardreaders. One is (I think) a USB 1, unbranded. The other is a USB 2 branded Seitec). Our cameras both use Sony Memory Stick Pro Duos). They both of worked with both my wife and my iMacs under 10.5.11. Both machines (hers from 2006, mine an Intel Core 2 Duo from 2007) have been happily upgraded to SL 10.6.1... but now the cardreaders work with her machine, but not with mine. They don't mount on the desktop. I have tried various combinations ... attaching them through keyboard /back of iMac, powered USB hub. Sometimes they are recognised by System Profiler, sometimes not! Disk Utility seems unable to see them at all, so I can't get it to mount them.
However, when I leave the card in my camera and connect it direct to the keyboard (or whatever socket I choose!) the computer recognises the camera immediately I switch it on, and downloads quite happily
I have a JVC Everio HD camcorder and am having some trouble importing the video. This morning, the camcorder was recognized by Finder and I could enter and view the files. However, the files are in .MOD/MP4 format so they would not import directly into iMovie.
This afternoon, I found a tutorial on how to convert the files so plugged my camcorder in again, only to find that Finder is no longer acknowledging it. It is recognized in iPhoto and Disk Utility.
I have the "show detail" box checked but Disk Utility is not showing detail. It goes through verify and repair, says it is finished, but shows no files. I have never had No files need repair. My computer has been slow and erratic and usually running Disk Utility works, but not now.
i have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.Â
for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.Â
thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.Â
curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.Â
this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.Â
well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.Â
i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.Â
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
I just plugged headphones into the headphone port on my iMac(dual core 2.4) I went to system preferences, sound, then output and only the internal speakers show up. I rebooted the machine and still, same thing.
I tried the same headphones on the eMac sitting next to it, and it worked just fine. Still confused about the iMac
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!Â
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.Â
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Running Diks Util on my iMac 10.6.2. i am given this warning. ========= Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
