Power Mac G5 :: Disc Drive Is Not Supported, Error Code 0x80020025?
Nov 15, 2007
I recently installed a Pioneer DVR-112D in my PowerMac G5 (10.3.9) after my original optical drive stopped reading DVDs. This new drive now reads previously burned CDs and DVDs just fine, but gives me the following message when trying to burn blank CDs and DVDs: The disc could not be used because the disc drive is not supported. Error code 0x80020025.
Information:
PowerMac G5
150gb internal drive, 512mb ram
View 4 Replies
ADVERTISEMENT
May 23, 2012
My iMac is suddenly showing error code 0x80020025 (disc drive not supported) when I insert a blank cd.I've burned to this type/brand of cd-r in the past and have never had an issue. How do I fix it?
Info:
iMac, Mac OS X (10.7.2)
View 2 Replies
View Related
May 27, 2009
Bought iBook G4 12" 1.2 mHz, with CD burner in it. Problems with it recognizing discs, and now get this error. Says drive not supported. Tried resetting PRAM, NVRAM, etc.
The manufacturer is M@TRHHT@cds-RW BW,8024
View 1 Replies
View Related
Aug 6, 2009
When trying to burn a DVD on my external Sony burner (model DRX-840U) I get error code:0x80020025, "this disc could not be used because the disc drive is not supported." I'm using an iMac with 10.5.7.
The drive worked fine last week. Now it consistently brings up the error code when inserting a DVD.
I've tried:
*Relaunching finder
*Attempted burning under a different login on the computer
*Restarting the computer
*I've searched every forum I can think of and nothing has worked.
View 1 Replies
View Related
Dec 21, 2009
I bought a Seagate external drive to use as backup, and formatted it for Mac. However, time machine fails to open and gives error message.
View 2 Replies
View Related
Mar 21, 2012
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E). I keeep getting this when I try to burn my daughters wedding pic to a dvd.
Info:
iMac, Mac OS X (10.7.1)
View 2 Replies
View Related
Jun 29, 2012
Hey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help! Model: iMac (21.5-inch, Mid 2011) OS: Lion OS X 10.7.4 I have the latest software updates and Firmware updates installed.
Info:
iMac, Mac OS X (10.7.4), Latest Firmware Updates patched
View 14 Replies
View Related
Apr 27, 2012
Recently my MacPro has been giving multiple errors that I can't open a particular application because PowerPC application are no longer supported. It references an application that I don't have on my computer and I'm not trying to open. I keeps listing the error over and over. Last night it listed it 88 times before I woke up this morning. They list one on top of the other running down from the middle of the screen to the right lower corner and then pile up there. I don't know what to do other than erase the drive and reformat and I really don't want to do that. I'm attaching a screenshot.
This shot shows 8 repeats in about 4 hours one day last week. This started about 3 months after I installed Lion, and I haven't installed anything else since I upgraded to Lion.
Info:
Mac Pro (Mid 2010), Mac OS X (10.7.3), Tons of ram
View 9 Replies
View Related
Jun 20, 2012
when i put campridge's CD for toefl practicing. It says " becaus power pc applications are no longer supported".
Info:
Mac Pro, iOS 5
View 1 Replies
View Related
Apr 28, 2009
I am trying to burn a DVD of files I want to back up from my computer, and it gives me this error when I try to burn a DVD from the folder that my files are in. Finder gives no mention that there is a DVD in the DVD-drive, but it does pop-up with a message recognizing that a DVD was inserted initially. My drive has been working fine in the past, so this is something that has just recently happened to my computer. Does anyone have any ideas about this? My computer specifications are in my signature below and I'm running leopard 10.5.6.
The specific error message that I get is this "the disc could not be used because the disc drive is not supported." I did a google of this, but the results turned up stuff relating to 10.3 and 10.4, neither of which being relevant to my situation
View 3 Replies
View Related
Nov 1, 2007
Shortly before switching to Tiger, I was having problems burning DVD's. I noticed it first with toast, but found that it also was happening with the onboard burning software for Mac OS X. Every time I tried burning, it would start into the burn and then give me this error: Sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D). I did a hardware test, reinstalled system software, and searched all over Google for any possible solutions. I found tons of people with the same problems, but everyone's solutions seemed to differ, and non seemed to work conclusively.
Some said that the lazer was having calibration problems and suggested using a cleaning DVD. Others said that if I created a new user and switched, then it would work. I tried that, and it just got worse. Others said that the media was not good but I've burned with the exact same media in the recent past, and it worked just fine then. Why would it stop accepting a certain type of media all of the sudden. Besides. My co-workers have the same computers, and they can burn just fine. Do I need a new drive, or is it just a simple software problem? CDs burn fine, but no DVD-Rs.
View 145 Replies
View Related
Nov 4, 2007
So I've been having problems with video in quicktime. I get green dots and other such errors in the video. When I play the same video in VLC I don't get an error. I was told that this is probably the video card, so I ran the hardware test. I got the error code '2ATI/1/4: 113-A13601-120' I was wondering if anyone could tell me what it actually meant, and whether I'll have to buy a new video card, or if there's some other way to fix the problem.
Information:
G5
Mac OS X (10.4.10)
View 3 Replies
View Related
Mar 28, 2009
Error 0x80020025 have an aluminium macbook, os x leopard, and suddenly cannot burn dvds, this is the first time that i have had this problem, have burned m,many dvds before.
View 1 Replies
View Related
Aug 27, 2009
I had a dvd in the drive of my imac and it had no idea it was there. it wasn't on my desktop and it wasn't listed under devices. I tried to open the dvd player, and it told me that there was no supported disc. After I ejected and reinserted it, it worked. Was this just a mac brain fart?
View 1 Replies
View Related
May 2, 2012
I am trying to back-up my computer to my external hard drive and a box is popping up saying "You can't open the application WD Backup.app because PowerPC applications are no longer supported." What does this mean? I have updated my system to Lion since my last back-up. What do I need to do?
Info:
Mac OS X (10.5.6)
View 2 Replies
View Related
Feb 17, 2012
I have a Mac Pro and suddenly it won't copy files from any external drive, or write them either. The drives mount and show up in fiinder, and they start copying, but after about 30 seconds they error out with "The operation can't be completed because an unexpected error occurred (error code 50).
It has done this on two different Mac Pros and 3 different external drives. I don't remember this haqppening before. I have Paragon NTFS running on both Macs and they have worked flawlessly for maqny months but now they won't complete.
Info:
Mac Pro, Mac OS X (10.6.8)
View 6 Replies
View Related
Aug 28, 2009
I bought a second dvd drive, a 216d Pioneer, for my Nehalem 2.26 octad. After a reboot it will work for a bit and then give me an error message (code # 0x80020025). The second, Pioneer drive (along with whatever disk was in it) is then no longer visible via the finder. A reboot makes the drive and disk visible again, but the error will invariably return. I believe the firmware on the drive is current (1.09) and it is listed as having "generic drive support" system profiler. I haven't had any luck tracking down a solution in this or other forums.
View 2 Replies
View Related
Oct 6, 2009
Does anyone know what error code -43 means? I have a macbook and I'm trying to open a microsoft word document from a flash drive. It worked yesterday, but now I can't open the doc.
View 1 Replies
View Related
Jan 11, 2011
I have an external 2TB Western Digital Caviar drive hooked up to my 2006 iMac through a docking bay and USB 2.0. I'm running 10.6.6 and the drive is formatted as Mac OS Extended. It's my media and backup drive and I'm always copying stuff to and from it. All was well and good with the setup and I had no problems for probably 5 or 6 months. Just around Christmas, though, I started getting alerts when trying to copy files over to the drive. Error Code: -50.
Basically, I can still view/read files on the drive and play songs in iTunes, but if I try to rip a CD, iTunes hangs and dies. If I try to copy any file over using the Finder or empty the trash with files from that drive, I get the -50 code and alert. A restart will fix the problem for a little while but then it's back after maybe 30 minutes or so that's obviously not a good long-term solution. This page claims it is an "Error in user parameter list" but I have no idea what that means. I've done a bunch of Googling, but people are saying it's anything from problems with networked NTFS drives (which it's not for me) or that it's a disk permissions issue (no bootable system on the drive).
View 6 Replies
View Related
May 10, 2010
I have a Late 09 15" MBP and a WD 1TB external HD. I've never had a problem until now. I start up the hard drive, then it loads up fine and the Mac recognizes it just fine. As soon as I try to copy something - doesn't matter how big it is - I get an error and at the end it says "(Error code - 36)". It just says the file cannot be read or written. Weird thing is I can access everything on the hard drive. Anyone have any tips before I try reformatting the HD?
View 7 Replies
View Related
May 6, 2012
My older PowerMac G5 Quad (Late 2005 model) has issue - CPU funs are spinning very fast. Checked with Hradware Test.It saysError Code: 2SVM/1/2: CPU BO VOLTS Also LED #2 and #7 are RED.
Info:
PowerMac, Mac OS X (10.5)
View 8 Replies
View Related
Jul 2, 2012
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 12, 2008
I did do a search on this problem, but i started a new thread b/c I think i may be having a slightly different issue...please hear me out..I have a Macbook, running Mac OS X Tiger (version 10.4.11). I have had a 500 GB external HD (MyBook) hooked up to it (via USB) for the past 4 months or so, never really had any issues, was always able to transfer files, no problem.However, today i suddenly ran into some serious problems. I tried to transfer some pictures to the external drive and after copying 200 or so files it gave me an error, said a specific file could not be transferred (specifically it said "the Finder could not complete the operation because some data in "IMG_3435.JPG" could not be read or written. Error Code - 36 "). At first I thought maybe that specific file was corrupted or something but i checked it out and it looked fine. So I then I tried transferring another folder of pictures, and then I got the same error right away (after transferring 3 files), for a different file. And now i'm at the point where I can't transfer ANY files to my external HD anymore! (T_T). And it's weird, when i transfer folders, it will transfer the folder itself but not the files.
View 6 Replies
View Related
Apr 1, 2012
I am unable to transfer movies from my External Hard drive to the MacBook. The error code is 36. how to get this sorted out?
How do I give change permissions, and give full control?
Info:
MacBook, Mac OS X (10.4.11), Mac OS X Tiger
View 2 Replies
View Related
Apr 21, 2012
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
View 3 Replies
View Related
Jun 19, 2012
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn".I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Nov 9, 2007
I keep getting error 0x 80020022 "communication to disc drive failed"no matter what i try burning. Firmware is up to date, and I'm using hi-quality discs. It's holding up my livelyhood
Information:
g5 dual 2.5
Mac OS X (10.4.9)
6 gig RAM, ATI 9600 card
View 5 Replies
View Related
Feb 21, 2012
I got a Power Mac G4 from a friend. I realized i can store all my content on there and just access it remotely from my 2011 Macbook Pro. While my G4 was running remore desktop it froze. So i held the power button to shut it off and when i restarted it all i get is the Apple logo on the gray screen,and i t wont start in safe mode. I forgot to mention i started togo throught the G4 and take his name off and ad mine (hard drive name and user names). I took the hard drive out and attached it to my MacBook Pro. The hard drive works fine,And i can access everything. I tried running disc utility on the G4 hard drive with my MacBook Pro. and it said ALOT.
[Code]...
2012-02-19 22:47:56 -0800: Volume repair complete.2012-02-19 22:47:56 -0800: Updating boot support partitions for the volume as required.2012-02-19 22:47:59 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2012-02-19 22:47:59 -0800:
2012-02-19 22:47:59 -0800: Disk Utility stopped repairing “Chad ”: Disk Utility can’t repair this disk.Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2012-02-19 22:47:59 -0800:
Info:
PowerMac, Mac OS X (10.1.x)
View 3 Replies
View Related
Apr 21, 2012
When I try to empty my Trash with a certain app in it I get error code -8003. I can't find reference to that code anywhere and do not know how to clean up the trash. "The operation can’t be completed because an unexpected error occurred (error code -8003)."
Info:
iMac, Mac OS X (10.6.7), iMac-24, iMac-27, G5, G4, G3, iBook, etc.
View 2 Replies
View Related
Sep 22, 2010
G5 Dual 2GHz 4GB DDR SRAM OS X 10.5.8 - Fans & disc drive motors begin racing during startup stall each time computer is started up from cold start. Restart works fine and everything launches. Mac Mail startup shows beach ball delay of 1 to 3 minutes at each launch. 17.7 GB remaining on HD. Have started from Leopard install disc and run Disk Utility, but receive error message that system cannot repair.Also receive the following continuing System Log info after continuing SyncServer error messages
View 3 Replies
View Related