Bought iBook G4 12" 1.2 mHz, with CD burner in it. Problems with it recognizing discs, and now get this error. Says drive not supported. Tried resetting PRAM, NVRAM, etc.
The manufacturer is M@TRHHT@cds-RW BW,8024
I recently installed a Pioneer DVR-112D in my PowerMac G5 (10.3.9) after my original optical drive stopped reading DVDs. This new drive now reads previously burned CDs and DVDs just fine, but gives me the following message when trying to burn blank CDs and DVDs: The disc could not be used because the disc drive is not supported. Error code 0x80020025.
Information:
PowerMac G5
150gb internal drive, 512mb ram
My iMac is suddenly showing error code 0x80020025 (disc drive not supported) when I insert a blank cd. I've burned to this type/brand of cd-r in the past and have never had an issue. How do I fix it?
Info:
iMac, Mac OS X (10.7.2)
When trying to burn a DVD on my external Sony burner (model DRX-840U) I get error code:0x80020025, "this disc could not be used because the disc drive is not supported." I'm using an iMac with 10.5.7.
The drive worked fine last week. Now it consistently brings up the error code when inserting a DVD.
I've tried:
*Relaunching finder
*Attempted burning under a different login on the computer
*Restarting the computer
*I've searched every forum I can think of and nothing has worked.
Error 0x80020025 have an aluminium macbook, os x leopard, and suddenly cannot burn dvds, this is the first time that i have had this problem, have burned m,many dvds before.
View 1 Replies View RelatedI have a Mac Pro and suddenly it won't copy files from any external drive, or write them either. The drives mount and show up in fiinder, and they start copying, but after about 30 seconds they error out with "The operation can't be completed because an unexpected error occurred (error code 50).Â
It has done this on two different Mac Pros and 3 different external drives. I don't remember this haqppening before. I have Paragon NTFS running on both Macs and they have worked flawlessly for maqny months but now they won't complete.
Info:
Mac Pro, Mac OS X (10.6.8)
I bought a second dvd drive, a 216d Pioneer, for my Nehalem 2.26 octad. After a reboot it will work for a bit and then give me an error message (code # 0x80020025). The second, Pioneer drive (along with whatever disk was in it) is then no longer visible via the finder. A reboot makes the drive and disk visible again, but the error will invariably return. I believe the firmware on the drive is current (1.09) and it is listed as having "generic drive support" system profiler. I haven't had any luck tracking down a solution in this or other forums.
View 2 Replies View RelatedDoes anyone know what error code -43 means? I have a macbook and I'm trying to open a microsoft word document from a flash drive. It worked yesterday, but now I can't open the doc.
View 1 Replies View RelatedI have an external 2TB Western Digital Caviar drive hooked up to my 2006 iMac through a docking bay and USB 2.0. I'm running 10.6.6 and the drive is formatted as Mac OS Extended. It's my media and backup drive and I'm always copying stuff to and from it. All was well and good with the setup and I had no problems for probably 5 or 6 months. Just around Christmas, though, I started getting alerts when trying to copy files over to the drive. Error Code: -50.
Basically, I can still view/read files on the drive and play songs in iTunes, but if I try to rip a CD, iTunes hangs and dies. If I try to copy any file over using the Finder or empty the trash with files from that drive, I get the -50 code and alert. A restart will fix the problem for a little while but then it's back after maybe 30 minutes or so that's obviously not a good long-term solution. This page claims it is an "Error in user parameter list" but I have no idea what that means. I've done a bunch of Googling, but people are saying it's anything from problems with networked NTFS drives (which it's not for me) or that it's a disk permissions issue (no bootable system on the drive).
I have a Late 09 15" MBP and a WD 1TB external HD. I've never had a problem until now. I start up the hard drive, then it loads up fine and the Mac recognizes it just fine. As soon as I try to copy something - doesn't matter how big it is - I get an error and at the end it says "(Error code - 36)". It just says the file cannot be read or written. Weird thing is I can access everything on the hard drive. Anyone have any tips before I try reformatting the HD?
View 7 Replies View RelatedI'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
Info:
Mac OS X (10.6.8)
I did do a search on this problem, but i started a new thread b/c I think i may be having a slightly different issue...please hear me out..I have a Macbook, running Mac OS X Tiger (version 10.4.11). I have had a 500 GB external HD (MyBook) hooked up to it (via USB) for the past 4 months or so, never really had any issues, was always able to transfer files, no problem.However, today i suddenly ran into some serious problems. I tried to transfer some pictures to the external drive and after copying 200 or so files it gave me an error, said a specific file could not be transferred (specifically it said "the Finder could not complete the operation because some data in "IMG_3435.JPG" could not be read or written. Error Code - 36 "). At first I thought maybe that specific file was corrupted or something but i checked it out and it looked fine. So I then I tried transferring another folder of pictures, and then I got the same error right away (after transferring 3 files), for a different file. And now i'm at the point where I can't transfer ANY files to my external HD anymore! (T_T). And it's weird, when i transfer folders, it will transfer the folder itself but not the files.
View 6 Replies View RelatedI am unable to transfer movies from my External Hard drive to the MacBook. The error code is 36. how to get this sorted out?Â
How do I give change permissions, and give full control?
Info:
MacBook, Mac OS X (10.4.11), Mac OS X Tiger
I bought a Seagate external drive to use as backup, and formatted it for Mac. However, time machine fails to open and gives error message.
View 2 Replies View RelatedI am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.  Â
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E). I keeep getting this when I try to burn my daughters wedding pic to a dvd. Â
Info:
iMac, Mac OS X (10.7.1)
When I try to empty my Trash with a certain app in it I get error code -8003. I can't find reference to that code anywhere and do not know how to clean up the trash. "The operation can’t be completed because an unexpected error occurred (error code -8003)."
Info:
iMac, Mac OS X (10.6.7), iMac-24, iMac-27, G5, G4, G3, iBook, etc.
I can't do much on my MacBook pro since I have this unexpected error occurred (error code -50), does anyone know what it is and how to fix it? Also when i try to open my iTunes it comes up with unknown error 13014.
View 3 Replies View RelatedI wanted to delete a file in my dekstop, but i can't delete it.. It pops out a message like this "The operation can’t be completed because an unexpected error occurred (error code -8072)."I have used "rm -rf" this kind of sudo, but it doesn't help. I can't even rename it also.
Info:
Mac Pro, Mac OS X (10.7.3)
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
I keep getting the following error message when attempting to sync my contacts, calendar, and bookmarks with my iPhone. When I check these under the "info" tab and ciick apply, the following error message appears:
iTunes cannot sync information with the iPhone because syncing has been disabled on this computer. Do you want to enable syncing? If you do not enable syncing, iTunes will not be able to sync contacts, calendars, bookmarks or mail accounts to your iPhone.
When I click yes, the following prompt appears:
*Syncing cannot be enable on this compute*r. The options I'm presented with are:
override and Ok.
When I click override, it takes away my selections to sync contacts, calendars, etc.
I have never disabled syncing. I've looked through system and iTunes preferences and can't even find an option to disable/enable syncing.
I'm attempting to setup up MobileMe and need to get this problem resolved.
I am trying to upgrade my old Mac from 10.3.9 to 10.4. I have 10.4.0 and 10.4.2. With 10.4.0 it goes to all the dialog and then goes to verifying disk, after a long while, it says error verifyiing disk, try again.
the 10.4.2 it gives a inmediate message "cannot perform an upgrade in this computer.
I backed up all my data onto a couple of DVDs before formatting and upgrading my ststem but now, when trying to copy this data back I am getting the error message. The Finder can't complete the operation because some data in "filenamehere" can't be read or written. (Error code -36). I have looked for ages to try and find a solution for this, but there does not seem to be one when copying from a DVD.
View 2 Replies View Relatedi wanna purchase something and i can't and i don't know why
Info:
MacBook, Mac OS X (10.6.8)
How can I fix an error code 553-'5.3.0?
View 3 Replies View RelatedI have some files on an external disk, and when trying to copy them from the external disk to the mac mini harddrive I am getting the following error message:Â
'The finder can't complete the operation because some data in <file name> can't be read or written (Error code -36)'Â
This is strange as I haven't changed anything and have previously been able to copy files?
Info:
Mac mini, Mac OS X (10.7.3)
My hard drive crashed. bought new computer..... have backup dvd's........... it seems to freeze itune....... but if I leave it alone it will give me an error that says it is unable to restore because of error -69..... some of my songs are restored but only like 100 out of 700.......and I have the shuffle, nano, and Itouch..... very headachey.
View 3 Replies View RelatedLately (started this morning), I've been getting some weird startup problems during startup. When pressing the start button, the fans spin to the max endlessly, most of the time the screen stays black without the Apple chime and computer doesn't start. After three times of shutting it down, it usually starts but performance isn't quite the same and i immediately get this error.
Sat May 2 14:19:21 2009
panic(cpu 6 caller 0x001A9C68): Kernel trap at 0x00a42002, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x0138c000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x00537048
CR2: 0x00000000, EBP: 0x36fd3e48, ESI: 0x0428a800, EDI: 0x03b18000
EFL: 0x00010202, EIP: 0x00a42002, CS: 0x00000008, DS: 0x03b10010
Error code: 0x00000000
Backtrace (CPU 6), Frame : Return Address (4 potential args on stack)
I use Adium 1.3.10 which normally could send message to offline user and my ex-girlfriend use Adium as well but I dont know which version. I sent really important message to my ex-girlfriend while she is offline and TWO HOURS later this message pop up to me.
"Message was not sent because the system is unavailable. This normally happens when the user is blocked or does not exist." But I did not block her and she does exist So I'm not sure she will receive this message or not. the strange thing that I worry is it was bounced TWO HOURS LATER AFTER I SENT IT,Has anyone experienced this case??? What I really am worry is the message will be sent to her or not?
