Mac Pro :: Error Code For 2nd Sata Dvd Drive (Pioneer 216d)?
Aug 28, 2009
I bought a second dvd drive, a 216d Pioneer, for my Nehalem 2.26 octad. After a reboot it will work for a bit and then give me an error message (code # 0x80020025). The second, Pioneer drive (along with whatever disk was in it) is then no longer visible via the finder. A reboot makes the drive and disk visible again, but the error will invariably return. I believe the firmware on the drive is current (1.09) and it is listed as having "generic drive support" system profiler. I haven't had any luck tracking down a solution in this or other forums.
View 2 Replies
ADVERTISEMENT
Feb 17, 2012
I have a Mac Pro and suddenly it won't copy files from any external drive, or write them either. The drives mount and show up in fiinder, and they start copying, but after about 30 seconds they error out with "The operation can't be completed because an unexpected error occurred (error code 50).Â
It has done this on two different Mac Pros and 3 different external drives. I don't remember this haqppening before. I have Paragon NTFS running on both Macs and they have worked flawlessly for maqny months but now they won't complete.
Info:
Mac Pro, Mac OS X (10.6.8)
View 6 Replies
View Related
Oct 6, 2009
Does anyone know what error code -43 means? I have a macbook and I'm trying to open a microsoft word document from a flash drive. It worked yesterday, but now I can't open the doc.
View 1 Replies
View Related
Nov 15, 2007
I recently installed a Pioneer DVR-112D in my PowerMac G5 (10.3.9) after my original optical drive stopped reading DVDs. This new drive now reads previously burned CDs and DVDs just fine, but gives me the following message when trying to burn blank CDs and DVDs: The disc could not be used because the disc drive is not supported. Error code 0x80020025.
Information:
PowerMac G5
150gb internal drive, 512mb ram
View 4 Replies
View Related
Jan 11, 2011
I have an external 2TB Western Digital Caviar drive hooked up to my 2006 iMac through a docking bay and USB 2.0. I'm running 10.6.6 and the drive is formatted as Mac OS Extended. It's my media and backup drive and I'm always copying stuff to and from it. All was well and good with the setup and I had no problems for probably 5 or 6 months. Just around Christmas, though, I started getting alerts when trying to copy files over to the drive. Error Code: -50.
Basically, I can still view/read files on the drive and play songs in iTunes, but if I try to rip a CD, iTunes hangs and dies. If I try to copy any file over using the Finder or empty the trash with files from that drive, I get the -50 code and alert. A restart will fix the problem for a little while but then it's back after maybe 30 minutes or so that's obviously not a good long-term solution. This page claims it is an "Error in user parameter list" but I have no idea what that means. I've done a bunch of Googling, but people are saying it's anything from problems with networked NTFS drives (which it's not for me) or that it's a disk permissions issue (no bootable system on the drive).
View 6 Replies
View Related
May 10, 2010
I have a Late 09 15" MBP and a WD 1TB external HD. I've never had a problem until now. I start up the hard drive, then it loads up fine and the Mac recognizes it just fine. As soon as I try to copy something - doesn't matter how big it is - I get an error and at the end it says "(Error code - 36)". It just says the file cannot be read or written. Weird thing is I can access everything on the hard drive. Anyone have any tips before I try reformatting the HD?
View 7 Replies
View Related
May 27, 2009
Bought iBook G4 12" 1.2 mHz, with CD burner in it. Problems with it recognizing discs, and now get this error. Says drive not supported. Tried resetting PRAM, NVRAM, etc.
The manufacturer is M@TRHHT@cds-RW BW,8024
View 1 Replies
View Related
Jul 2, 2012
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
May 23, 2012
My iMac is suddenly showing error code 0x80020025 (disc drive not supported) when I insert a blank cd. I've burned to this type/brand of cd-r in the past and have never had an issue. How do I fix it?
Info:
iMac, Mac OS X (10.7.2)
View 2 Replies
View Related
Nov 12, 2008
I did do a search on this problem, but i started a new thread b/c I think i may be having a slightly different issue...please hear me out..I have a Macbook, running Mac OS X Tiger (version 10.4.11). I have had a 500 GB external HD (MyBook) hooked up to it (via USB) for the past 4 months or so, never really had any issues, was always able to transfer files, no problem.However, today i suddenly ran into some serious problems. I tried to transfer some pictures to the external drive and after copying 200 or so files it gave me an error, said a specific file could not be transferred (specifically it said "the Finder could not complete the operation because some data in "IMG_3435.JPG" could not be read or written. Error Code - 36 "). At first I thought maybe that specific file was corrupted or something but i checked it out and it looked fine. So I then I tried transferring another folder of pictures, and then I got the same error right away (after transferring 3 files), for a different file. And now i'm at the point where I can't transfer ANY files to my external HD anymore! (T_T). And it's weird, when i transfer folders, it will transfer the folder itself but not the files.
View 6 Replies
View Related
Apr 1, 2012
I am unable to transfer movies from my External Hard drive to the MacBook. The error code is 36. how to get this sorted out?Â
How do I give change permissions, and give full control?
Info:
MacBook, Mac OS X (10.4.11), Mac OS X Tiger
View 2 Replies
View Related
Dec 21, 2009
I bought a Seagate external drive to use as backup, and formatted it for Mac. However, time machine fails to open and gives error message.
View 2 Replies
View Related
Dec 11, 2009
I have a PowerPc Mac G5 running Leopard 10.5.8 and I have been upgrading some parts. I installed the Pioneer DVR-A18L, which is the European version of the DVR-118L that is being sold as Mac compatible everywhere. When checking on System Profiler it is recognized as the Pioneer DVR-118L and the following:
PIONEER DVD-RW DVR-118L
Firmware Revision: 102
Interconnect: ATAPI
Burn Support: Yes (Generic Drive Support)
Profile Path: None
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RAM, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
So, at the moment the drive reads CD's but it doesn't get to play them; on iTunes it reads the tracks and gets the titles and stays hanging and doesn't get to play them at all. When inserting DVD's it spins for a while until it says that a blank DVD/Media have been inserted. I thought it would work straight away as the DVR-118L.
View 3 Replies
View Related
Jun 30, 2012
I purchased a G5 in 2005. Never once used the drive for DVD. So I decided to use it today, and it doesn't work. I tried to burn a DVD that didn't work. The drive doesn't even recognize it. I did some research, I came to the conclusion that I have to update the pioneer d112 firmware. Seems simple but the pioneer update is for windows format!
Info:
Mac Pro, Mac OS X (10.5.8)
View 6 Replies
View Related
Apr 21, 2012
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.  Â
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
View 3 Replies
View Related
Jun 19, 2012
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Mar 21, 2012
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E). I keeep getting this when I try to burn my daughters wedding pic to a dvd. Â
Info:
iMac, Mac OS X (10.7.1)
View 2 Replies
View Related
Apr 21, 2012
When I try to empty my Trash with a certain app in it I get error code -8003. I can't find reference to that code anywhere and do not know how to clean up the trash. "The operation can’t be completed because an unexpected error occurred (error code -8003)."
Info:
iMac, Mac OS X (10.6.7), iMac-24, iMac-27, G5, G4, G3, iBook, etc.
View 2 Replies
View Related
Mar 13, 2012
I can't do much on my MacBook pro since I have this unexpected error occurred (error code -50), does anyone know what it is and how to fix it? Also when i try to open my iTunes it comes up with unknown error 13014.
View 3 Replies
View Related
Feb 21, 2012
I wanted to delete a file in my dekstop, but i can't delete it.. It pops out a message like this "The operation can’t be completed because an unexpected error occurred (error code -8072)."I have used "rm -rf" this kind of sudo, but it doesn't help. I can't even rename it also.
Info:
Mac Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Aug 23, 2010
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
View 2 Replies
View Related
Dec 5, 2010
I backed up all my data onto a couple of DVDs before formatting and upgrading my ststem but now, when trying to copy this data back I am getting the error message. The Finder can't complete the operation because some data in "filenamehere" can't be read or written. (Error code -36). I have looked for ages to try and find a solution for this, but there does not seem to be one when copying from a DVD.
View 2 Replies
View Related
Feb 24, 2012
i wanna purchase something and i can't and i don't know why
Info:
MacBook, Mac OS X (10.6.8)
View 2 Replies
View Related
Apr 18, 2012
How can I fix an error code 553-'5.3.0?
View 3 Replies
View Related
May 10, 2012
I have some files on an external disk, and when trying to copy them from the external disk to the mac mini harddrive I am getting the following error message:Â
'The finder can't complete the operation because some data in <file name> can't be read or written (Error code -36)'Â
This is strange as I haven't changed anything and have previously been able to copy files?
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Oct 27, 2007
I plugged in my external HD last night and was told I'd have to format. I moved all my data over to a larger disk during the night so as to clear it for this. I woke up this morning, did a spotlight search for Time Machine and got "An unexpected error occurred (Error Code -43). I then, in my half asleep state, thought that I'd just uninstall TM. I have this app called AppDelete, which did the trick. Now I realise that TM is in system prefs and appears to be working.
Firstly, has anyone else gotten this error, and secondly, is there any way to get back whatever it was I deleted earlier? Maybe by using the install disk. I looked at it earlier and didn't see any options.
I noticed that the TM "app" in the Applications folder was only a few hundred kbs so I may not have done much damage. Doesn't anyone know what that part is? Is it just a frontend or what?
View 10 Replies
View Related
Dec 10, 2007
I am trying to transfer some videos from one external HD to another external HD through my MacBook Pro. I copy the whole folder but only half get transferred, the other comes up with an Error Code 0.
View 17 Replies
View Related
Nov 26, 2008
I am trying to transfer all my music over to another hard drive and everytime that I try, I get "error code-61" about 1/4 to 1/2 through it. I tried copying to a different hdd.. same problem. So I researched it, turns out its a permissions problem. When I try to run Disk Utility on the drive with the music it does not allow me to verify or repair the disk. I was thinking about trying to do the transfer in windows.
View 9 Replies
View Related
May 4, 2009
I have an old PowerMac G4 (AGP Graphics), which has served me dutifully for a long time. However, I recently took all but 128mb of the ram out to temporarily use in other computers, and when I went to put the modules back in, basically none of them worked. Here's the deal: I have 2 256 modules, and when I put those in my computer, whether individually, together, or with other modules, I get this message on-screen and the computer does not boot: localhost:/ root# []. Similarly, I have 3 128mb sticks, but if I put more than one in the computer at a time, I get the same message. I'm thinking the computer may have some issue with more than 128mb of ram, but why all of a sudden? I don't really know anything about code or whatever the computer is trying to tell me.
View 1 Replies
View Related
Feb 26, 2010
error code 2STH/1/3:cpu AAD7417AD1
I am using a Power Mac G5 and its crashing down when I'm running the softwares and hardly start as well..took it to a reseller and got a bill and ask me to change the logic board..is there any way to fix this without replacing the logic board.
View 2 Replies
View Related
