I understand the lion installer evaporates after use. I have three macs and would rather not endure the 2+ hours to download lion for each. As soon as the App Store finished downloading it, it went straight into the install sequence. I've stopped at the software license page for fear that it might proceed after that and I won't be able to stop it prior to the installer disappearing.
Info:
iMac, Mac OS X (10.7.3)
Macs Console says this every time I try to update from 10.6.7 - 10.6.8 "10:08 PM Installer[244] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." I can't update what so ever... every application basically needs to be manually installed or just comes to an unknown error either restarting the Mac or going through standalone...
Info:
iMac, Mac OS X (10.6.7)
If I do not use Time Machine, and open a new document in Pages, and type for ten minutes, and close the document, and click "Don't save" by mistake, is there any Auto Save or Versions of that document or just 100% out of luck? url...but I don't get any clear yes or no from it.
Info:
MacBook Pro, Mac OS X (10.7.2)
Whenever I try to install the latest preview of Mountain Lion, it says"Some features of OS X Mountain Lion are not supported for the disk "R2iMac". The warning directs me here: http://support.apple.com/kb/HT4649 It seems like it'll let me continue, but once it restarted it eventually said the installation failed. The point is I do have a Recovery HD and I don't know what to do about this. Check out my partitions:And here's the error dialouge: Please advise.
Info:
iMac 2.4 Ghz Intel Core 2 Duo 24", Mac OS X (10.6.4), 4GB RAM
Since upgrading to Lion, I can't save changes or even save new documents in Pages on my laptop. When I try to save, I get the dialog box: "The document “Untitled 2” could not be saved as “Untitled 2”. Permission denied" I can't find anything in Pages preferences or in the System preferences where this setting can be changed if it is a setting.
View 2 Replies View RelatedI recently upgraded from snow leopard to 10.7.3. I tried to install the beta of messages. When I tried to run the installer it froze whilst checking if it was able to install on this computer. In the end I had to force quit the installer. This was the first piece of new software I had tried to install since upgrading to 10.7.3. In. The end I gave up. Today I tried to install another application. Exactly the same happened and I had to force quit again. It appears that i am now unable to install any new apps?
Info:
iMac, Mac OS X (10.7.3)
I need to make a bootup drive that has 10.7.2 on it on my iMac. I do not have -- however -- a Lion install disk...and I know I can't go backwards with the 10.7.3 that's running on it. I'm totally fine making a new bootable partition...but
How do I start from scratch with 10.7.0...and upgrade only to 10.7.2....with no disks?
(By the way, I have a Mid 2011 i7 iMac)
installer wasn't working for me while trying to install a new program from a disc I bought.Did all the software updates for my computer, and the installer now works..
Info:
MacbookPro 13", Mac OS X (10.5.8), Lovely Hot Pink Satin looking shell.=)
I just downloaded the Photoshop CS6 Beta on my Macbook Air (August 2011) with Lion 10.7.3. The Adobe installer app fails to launch. I just installed CS6 on my Mac Mini Server with no problems and in fact, created a new user on the MBA and the installer app will launch and install CS6 under that user account. I have run the 'repair permissions' utility on the hard drive.What is going on inside my main user account that is preventing this app from initializing?
Info:MacBook Air, Mac OS X (10.7)
I recently purchased Lion. When I downloaded the OS on my Mac Pro, it automatically installed itself. Where can I find the installer file if I want to install Lion on another Mac computer?
Info:
Mac Pro, Mac OS X (10.7.4)
I have a MBP 13" early 2013 / Mountain Lion 10.8.2...A while ago I got a spinning wheel right after starting my mac. I contacted Apple since my mac was still under warranty, and after further diagnosis, they told me that I have to replace the HD, so they mail me a new HD.
I connected the new HD on a USB cable to format and re-partition it using Disk utility (At this point, DU was able to see the HD on a USB connection). After partitioning, I removed my Mac cover to replace my HDs. I booted using a Mountain Lion USB drive, but the installer couldn't find the new HD, just the recovery partition. I bought a new HD from Amazon, same result, my mac can start with teh old HD. Also, the disk utility can read the new HDs if they are on a usb connection, but it cant read them if they are on a SMART connection !
Info:
MacBook Pro (13-inch Mid 2012), OS X Mountain Lion (10.8.2)
For the past month or so, any time I've tried to go through the process of installing an app that requires Installer to do the work, when it comes time to enter my admin password, nothing happens. The password box pops up, I enter the correct password (as when I enter an incorrect one it does its "incorrect password shake-thing") and, like always, the admin password box disappears. Normally at this point, the installer continues on to install the app, but instead it does absolutely nothing. I can click "Install" again to enter the password, but, again, nothing happens. I've tried changing my password, deleting preference files, doing a disk repair and permissions repair - nothing.
Info:MacBookPro, Mac OS X (10.7.3), 2009 Unibody
I'm trying to make an OS X Lion boot disc. A failed Windows 8 Bootcamp install killed my Mac, but luckily I had a Time Machine backup which was accessible via the Recovery Disk. However, I would still like to have a boot disc handy in case something like this happens again and the Recovery Disk is somehow corrupted.
I Googled(among other things) how to make one, and the instructions seem fairly simple. Only, I can't find a Mac OS X Lion Installer anywhere. When I bought my refurbished iMac from Apple, OS X Lion was already on it. Since I didn't download it from the App Store it seems I don't have the Lion Installer to make a boot disc... Anything I can do (besides wasting $30 to redownload Lion from the App Store for the file) ?
Info:
iMac, Mac OS X (10.7.3)
After an installation failed to complete (which I Force Quit), nothing else will install. I have OS X Lion and am wondering if there is a way I can remedy this without bringing it into a professional? The program was Cubase 4.
Info:
MacBook Pro
I am currently installing OSX 10.7.3 on an external passport HD for my wife whose Macbook hard drive has died.I now have all the system up to date but have encountered an odd problem.All the .mpkg installers are opening in Terminal not the Installer utility, which I can't find.My choices are in Open with: Terminal, App Store and Other.
View 3 Replies View RelatedJust downloaded 10.7.3. The installer takes me to a box to select the hard drive where I want the new OS to go, but it is greyed out. Cannot select it.
View 8 Replies View Relatedi'm attempting to load win7 onto my MAC. Thus far i have downloaded the .iso image off MSDN (throught my university, for all intents and purposes should be as legitimate as an off the shelf copy) and burned it to DVD as a bootable disc image. however for some reason when using Boot Camp im told "The installer disc could not be found".There is data on the disc however when i go into the disc via finder it appears empty (no icons)... even though it is not (get info > xyzMB used).
Info:
Mac Pro, Mac OS X (10.7.3)
I am not able to install anything, from an Acrobat update to Apple Motion. The installer always hangs around 3/4 of the way through.
View 1 Replies View RelatedI have a MBP (Mac OS X 10.6.8 Snow Leopard) with 2.6 GHz Intel Core 2 Duo, 4 GB SDRAM. I am trying to to upgrade to Mac OS X Lion. I have attempted to create a USB installer with a Lexas 16 gb USB memory stick and I have gotten the following error towards the end of the restore:
"Restore Failure Could Not Restore- Cannot Allocate Memory".
What does this mean? Is there anything I can do other than attempt burning a disk (which I don't want to do cause of the lengthy process)? When I review the contents all the installer files are present. Upon rebooting, it appears the installer is working but I have not initiated installation out of fear that the installer is incomplete. Should I attempt installation?
Info:
MacBook Pro, Mac OS X (10.6.8)
I just bought an SSD for my MacBook Pro and I am trying to use a Lion recovery installation USB hard drive that I created when Lion was first launched. I have successfully used this drive to install Lion on my old MacBook but I can't actually remember using it for this MacBook Pro.
When I try and do a clean install of Lion on my MacBook Pro with this new SSD, instead of installing from the drive like I have successfully done in the past, it's trying to download a 4.044 GB package from the Internet. I wouldn't mind so much if it wasn't estimating 5-6 hours to download and it's already failed to download twice?
I figure it's downloading it again for few possible reasons.
1. There is a more current installer available than this one I am using so its trying to download a current version.
2. I can't use this installer because it was was created on a different MacBook.
What the reason might Be?
Info:
MacBook Pro, Mac OS X (10.7.1)
Upgraded to Lion recently. Trying to update printer drivers. All attempts to open official Apple printer drivers packages result in: "The Installer can’t open the package. There may be a problem with file ownership or permissions."
Info:
iMac, Mac OS X (10.7)
When installing apps through Installer (from .dmg disk images and .pkg packages), everything works smoothly until it asks me for a password. When I enter it, Installer goes back to the screen before it asked me for the password. When I click next, it asks me for my password, and the cycle repeats. I tried removing my password to no avail. I can install .pkg files from the sudo installer -pkg command. I dont know how to do this for installers that are in app form.
Info:
MacBook Pro, Mac OS X (10.7.3), MBP Early 2011
My mail setup requires SMTP to use 1025 for the port. I change this under the preferences but if I restart the mail program, it does not appear to save this setting. Is this a bug or can I set this manually behind the scenes to avoid having to change this each time I restart the program?
View 1 Replies View RelatedSave and also save as menus disappeared from Lion Preview file menu. How can I save pdf documents?
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
Before the problematic ridden Lion OS, I was always able to save a pdf page in Safari simpy be Save or Save as. Now I always get the annoying message ''File xxxx can not be exported as xxxx.pdf". What? Been doing this for years until the new OS. Is there a magic setting somewhere to be able to save?
Info:
iPad, iOS 5.0.1, MacPro, MacBook Pro, iPad, iPhone
When I right click to save a picture online, it doesn't give me the opportunity to save something as a JPEG. I instead have to save it as a preview and then export it to JPEG. This seems like something relatively new.
Info:
OS X Mountain Lion (10.8.3)
I am unable to save documents created on Pages and Textedit on my main "Macintosh HD" after the first save. If I create a document, save it then edit it and try to save again it comes up with "This document "test" could not be saved" No extra info other than that message.
If I try to save onto my second drive, " Macintosh HD 2" (the non-boot drive) it works fine.
I have
1/ checked read and write permissions and my Macintosh HD and they are set for "read & write"
2/ I have repaired disk premissions using Disc Utilities to no avail
3/ booted using Cmd - R and used terminal and applied "reset home directory permissions and ACL's" to no avail.
Info:
iMac, iOS 5.0.1
Even though my permissions are set to read write, I can't save changes to a TextEdit file. The program keeps saying I don't have permission and asks me if I want to create a duplicate. How can I fix this?
View 2 Replies View RelatedJust got my new 27" iMac with a huge screen. I positioned about five different apps on the screen all tiled neatly like a puzzle.I would like to permanently save this layout of apps. I realize Mission Control provides several desktop views. Problem is if I open other apps to perform temporary tasks, I can't seem to find a way to click one button and have everything go back to my neatly organized set of tiled apps on the desktop.
View 1 Replies View Relatedmy 3 hours screen flow works are completly gone because lion's autosave feature.saved final version and re opend it. next, i deleted existing contents and try to save with another name. because this have 2 giga more contents. existing file was gone. I am really wonder my process was bad? am i missing some to use lion?i am regret so much to use this in lion and go to snow leopard again.
View 1 Replies View Related