OS X V10.7 Lion :: Can't Print To Canon MF8050cn Via Airport Express
Apr 27, 2012
I have an Airport Extreme Base Station set up that is connected to my modem. I purchased a new Airport Express that I have used to extend my network. I plugged my Canon MF8050cn printer into the USB port of the airport express. I've added the printer successfully, but when I try printing to the Canon via wifi, I get this error: Â
"Canon CMFP Printer Driver; Printer is not responding.Check the printer power and connection, and then try sending printing job again." Printer power is on and connected correctly. As a side note, I am able to print to the printer successfully when I plug the printer into my macbook air directly via USB. So I have two printers added, "Canon - USB" and "Canon - Wifi". The latter is the one that gives me the error. I purchased the airport express so I could print wirelessly as I'm unable to move my printer closer to the Base Station.Â
Info:
AirPort Express 802.11n (1st Gen), Mac OS X (10.7.3)
View 8 Replies
ADVERTISEMENT
Mar 17, 2008
I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop.
View 2 Replies
View Related
Feb 27, 2009
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies
View Related
Nov 10, 2008
but then it doesn't work. bonjour doesn't scan anything. i've been not wirelessly printing in the past 4 months that i've had this thing [URL]. i have latest windows xp sp3 and i have wifi on/off on my macbook pro. i only use bootcamp.
View 6 Replies
View Related
Mar 25, 2012
We have a Canon MF4380dn (similar to MF4370dn) and we cannot print to it from a MacBook Pro that is running Lion 10.7.3 We have tried connecting via USB and via network and have installed the latest UFR II 2.30 driver from Canon. We have completely removed the drivers and re-added them with no success. It can see the printer when it is connected either via USB or via network and it adds the software correctly. However, whenever we try to print a test page it seems to send it to the printer and then it immediately disappears and no page prints
View 4 Replies
View Related
Mar 20, 2012
I have an Intel iMac running OS 10.7.3 and I'm trying to print to a Canon IPF610 wide format printer. I keep getting a garodclfilter error : 3000. I can print to it from my old Mac G5 running 10.5.8 with no problems. I do have the latest driver installed from Canon's website and also tried reinstalling it several times without any luck.Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 6 Replies
View Related
May 3, 2012
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
May 14, 2012
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
View 14 Replies
View Related
Apr 14, 2012
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
May 5, 2012
I cannot install the Canon LBP 5000 laser color print on Mac OS LIOX.Â
Info:
iMac, Mac OS X (10.7.1)
View 4 Replies
View Related
May 14, 2012
I had to download software compatible with 10.7.4 in order to run a Canon iX6520 Printer, including Easy - PhotoPrint EX. It worked for a while, but now crashes every time I try to use it, just after clicking on "Print". How to correct this?
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 23, 2012
Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.
Sometimes it says not authorized some time it keeps on trying.Â
When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared . Â
I have a Dlink DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
View 3 Replies
View Related
Jun 8, 2012
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
View 1 Replies
View Related
Sep 10, 2014
I am trying to print via wireless from my iPad (3rd generation) and iPhone 5 to my new canon MG3520 -- but it seems I have to set this up first to use with airprint? How to do that---? Â
OK I set-up the LAN (first connecting printer to the MacBook Pro running 10.8.5) via USB and then removed the USB cables so that now the iPad and the iPhone can select the printer - but it just prints blank sheets of paper and says there is an error each time.Â
Info:
MacBook Pro, OS X Mountain Lion, Also a Mac SE running 6.0.4 - not upgrading that!
View 1 Replies
View Related
Mar 13, 2012
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 9, 2012
Migrating to Mac from XP my first purchase was a MacBook Pro, and now I'm trying to come up with a method to print to either my HP 8050 or HP 720C. So far nothing works.
Info:
MacBook Pro, Mac OS X (10.7.3), with HP 8050 printer
View 2 Replies
View Related
Mar 10, 2012
I then whantet to reconnect my Airport Express, witch i use for music in the living room.But i couldent for the life of me find out how to do that, so i thougt, ill just reset the thing, and set it up again.But this is where the problem starts.Every time i try to connect to the Express via the wifi list, the Airport Utility starts up fine, and starts the setup, but then crashes...!It dose this every time, at the same place, when it says "reading previous settings". Im running an iMac with lion 10.7.3 and Airport Utility is version 6.0.
[code]...
View 11 Replies
View Related
May 16, 2012
After upgrading to Lion on my Macbook Air, I can't seem to be able to connect to my external speakers through airport express. Somehow I can't get the little icon I used to do, on the bottom right corner of the iTunes window (on the left of genius) to select the speakers. I checked the preferences in vain.
Info:
MacBook Air, Mac OS X (10.7.4), Have airport express installed
View 1 Replies
View Related
Jun 20, 2009
it's been a year I have been using a mac and I am 200% enthusiast about it, I also managed to solve all the problems, until now...
I have a black MacBook dated 2008, a Time capsule also dated 2009 and a Canon multifunctional device model i-Sensys MF 4140.
The MF4140 worked great until now when connected via USB.
Now I want to print wireless with the help of my Time capsule, so I connected the MF4140 to Time capsule but it doesn't work. I can see it in System preferences/Print & fax/add via Bonjour but I cannot find the proper driver in Print using...
I already downloaded the proper driver from the official Canon software/driver download web page or I hope so...
View 1 Replies
View Related
Apr 18, 2012
My boss inherited an iMac. It connects to his wireless network and will print a test page, but will not print anything else. He is running Snow Leopard.
Info:IMAC, Mac OS X (10.5.4)
View 1 Replies
View Related
Aug 22, 2014
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Jan 17, 2009
I recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple"
Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
Is there anything I could be doing wrong?
Can I have any suggestions to get this going?
View 2 Replies
View Related
Dec 1, 2014
trying to use OS X yosemite with Canon MF 4890 printer. Dowloaded driver, still showing not responding.
View 8 Replies
View Related
Jun 2, 2014
All of a sudden I cannot print to my Canon MF4370dn. I am connected via the wifi network. I didnt have a problem with any of this until a week ago. I called Comcast and they told me that they connections were good. I know this is true since my ADT service is working just fine and it is connected to this network.Â
I called Canon and they are not supportive at all. They tried to uninstall and reinstall printer but it still did not work.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Feb 25, 2009
I have a Canon Pixma MX700 connected to a PC and am able to print text/word files from my MAC to the printer via the router without any problems. However, whenever I try to print a document containing a table or a graphic, it doesn't print in the right place, and there is often a blue 'echo' of the table or image that also prints. I am currently using a gutenprint driver.
View 3 Replies
View Related
Feb 21, 2012
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Dec 9, 2014
I have a Macbook air and my printer is a canon 6150.Â
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.Â
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.Â
View 1 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Jan 29, 2009
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies
View Related
