I have a Macbook Pro, ipad 2 and apple tv as well as a Canon MP640 all connected through airport xtreme. All was working fine until I upgraded from Snow Leopard to OS X Lion. Now I can't print or scan to my Mac, either from the MacBook or from the printer/scanner.
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.7.3)
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
Can't print from Appleworks after installing latest Security Upgrade and latest Brother printer software. Other apps seem to be OK. Appleworks crashes when it tries to bring up the print dialog box.
Info:
MBP 13" and iMac (late 2006), Mac OS X (10.6.2)
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
When I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
Just installed Snow Leopard over 10.5.8. on a Mac Pro 2.66.
My HP C8180 copies, prints but will not scan .
I installed latest (2008) software, to no effect.
Is there a fix for this, or must I wait for new software & drivers from HP?
PS My Dymo won't function either, new drivers expected "in the Autumn"
have information on the following:Network Utility Port scan =Open TCP Port: 2020 xinupageserver?Is it a Trojan Horse and how can one close the Port?
Info:
iMac, Mac OS X (10.6.8)
I just migrated to OS 10.6.8 and my hp scanjet 3670 is not recognized. Is it a paper weight now?
Info:
Mac Pro, Mac OS X (10.6.8), hp scanjet 3670
My HP Photosmart 3210 all-in-one wouldn't initialize and sent error messages after I installed Snow Leopard yesterday. I went on the HP support network, which gave me a solution that sometimes works and sometimes doesn't, plus in the past I never had to take all the extra steps to scan a photo. The HP support site claims that upgrades for HP Printer devices was included with Snow Leopard. So why can't I just press the scan button like I used to?
View 20 Replies View RelatedI have an issue making the scan to network function to work between HP LaserJet m1120n multifunction printer and Snow Leopard.Â
Printing is working fine and it was added via IP.Â
I checked the HP site for the instruction, but it does not work.Â
[URL]
anyone using the same printer/scanner that could give me tips to get this working?
I have a Canon MX350 wifi printer that my MacAir recognizes but not my iMac. Both are on OS X 10.7.4Â snow leopard. It's a pain to get anything printed right now - I have to grab everything through the MacAir since I can't print or scan directly from the iMac.What do I do?
Info:
iMac, Mac OS X (10.7.3)
I have an iMac with Mac OSX 10.6.8 and 2.4 GH2 Intel Core 2 Duo processor.I want to upgrade to Lion so that I can use iCloud to share documents with my iPad.Do I have to upgrade to Snow Leopard first or can I upgrade directly to Lion?
Info:
iMac, Mac OS X (10.6.8)
I've got a dual-ethernet Airport Extreme base station. I've connected my AIO HP c309a to it by every possible means; ethernet, wireless and USB.
No matter what I do, I can NOT scan from my computer or to my computer, wirelessly.
I used to get an error to the effect of, "failed to create a session" when trying to scan. Now, I'm unable to locate the scanner in Preview at all!
It prints just fine. I've installed the latest Snow Leopard printer drivers, and they're working fine and are the correct drivers. Airport Extreme's firmware is up to date.
I'm having an issue with the printer and scanner preferences after an upgrade from SL to lion. It keeps quitting, after several attempts I could reset the printing preferences as described in the apple support doc here [URL] but no luck it still quits. I also reset the pram and smc.
This is the crash log:
Process: System Preferences [217]
Path: /Applications/System Preferences.app/Contents/MacOS/System Preferences
Identifier: com.apple.systempreferences
Version: 11.0 (11.0)
Build Info: SystemPrefsApp-214003000000000~2 .....
... long time reader, first time poster!! So I'm doing it. I'm switching from PC to Mac. I've been waiting for a while now and the new MacBook Pro's have convinced me. I'm buying the 13 inch this week.
However I'm slightly worried about the upgrade to Snow Leopard in September.
My question is if I buy a new MacBook Pro this week and upgrade from the current version of Leopard to Snow Leopard will it be the EXACT same as the version of Snow Leopard that ships with new MacBooks after September?
Is the upgrade just the same as the full software version available post September? Does the upgrade it just detect if you have the previous software and installs as if it were the full? Or does it just "patch" things depending on what's different from previous versions?
I can wait till after Snow Leopard is released in September 09 if it is different to Leopard upgraded to Snow Leopard.
Pros and cons ?
View 7 Replies View RelatedSince I upgraded to Maverick the Scan Print in System Preferences freezes when I try to open it. I repaced my old Canon printer, because there was not a driver update available for it. My new printer is a HP Photosmart 7520. I downloaded the newest driver and software for it , but when I try to open HP Utilities it also freezes.
View 3 Replies View RelatedI need to print a pile of A5 posters. Can I gert two on an A4 page using Pages
Info:Mac Mini
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
I have had a Canon MX700 for a few years now, and have generally been very happy with it - when it works.Â
One bugbear of mine is that the "Scan to" button on the scanner stops working from time to time. It will work magically for AGES, then.. Pressing the button shows "Set the PC to start scanning" on the printer.Â
This usually results in me spending hours removing, and re-installing Canon drivers/software, restarting my Mac(s), the Printer, my Wireless, etc, until I eventually get this going again. (Pressing the "Scan to" button results in a list of my Macs to scan to).Â
When the printer is doing this, scanning from the Mac(s) works no problems - using Canon's Scan software, or Image Capture. Printing works fine also. So, the Printer can clearly communicate to the Mac(s). It just doesn't allow you to initiate the scan from the Printer.Â
Info:
Mac OS X (10.6.8)
I was wondering if anyone here has an Epson Artison 800 printer and has upgraded to Snow Leopard. I made the mistake of installing snow leopard last weekend, and have not been able to print since. I searched for new drivers and found a couple, but still have no luck.
View 3 Replies View RelatedI recently upgraded to Snow Leopard and now my printer won't print color...everything comes out grayscale. What gives?
I have an HP 5850 connected via ethernet and on a router. Worked fine in 10.5
Program doesn't matter. Web, Word, Photoshop, Illustrator..
when I click on the prefpane i get "Could not load Print & Scan preference pane." I have already tried to delete the files in my libary.Â
Info:
MacBook
Pro, Mac OS X (10.7.4)
I have a 24" iMac (purchased last spring) and an HP Deskjet 842C inkjet printer. The photo print quality was quite good under Leopard, but is very poor under Snow Leopard (I'm using the latest updated version 10.6.1 with the Gutenprint print driver, 5.2.3). The images have a noticeable bluish cast, and considerable banding. Changing the print quality and paper type does not solve the problem, in fact, the image quality usually suffers. HP has not updated the drivers since 2005.
View 10 Replies View RelatedSo I'm trying to print to a network printer, connected to a Vista PC. My Brother (windows fanboy) is able to print just fine through his wireless PC (Win7) but I can't get my head around why I cannot. I saved a webpage that helped me out before (used on Leopard) which use to work but it no longer work
http://forums.macrumors.com/showthre...print+to+vista
I have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears.  have ried down loading also disinstalled printer and reinstalled. Â
View 3 Replies View RelatedUpgraded my iMac to 10.6 Snow Leopard. Can't print to my hp LaserJet 1012. What is the fix?
Info:
iMac, Mac OS X (10.6.8)
I am having a problem with my Canon Pixma 5200. For some reason it has stopped recognising text. It will print out the test print ok. I can print pictures but no text. I have used different applications, Pages, Word and pdf and although it sounds as though it is printing I end up with a blank sheet. I have a letterhead with my email address on it and having typed a long letter only the email address came out (this was in the same font as the letter but a smaller size).
View 2 Replies View RelatedAfter installing 10.6.8 and safari 5.1.5, can't print pdfs from sites. Unable to save same pdfs also. Installed lasted software for my printer. Firefox doesn't display the pdfs.Worked fine with 10.6.7.
Info:PowerMac, Mac OS X (10.6.6)
I just bought a second-hand Macbook Pro to handle e-mails and browsing at a holiday place, replacing an older notebook running 10.4.Â
Each day for years I have printed a puzzle from the NY Times and scale it to a preferred size by the sequence <<command-print / page set-up / scale / enter>> then print>> in the Print panel. 10.6.8 does not scale the page; it prints at 100%.Â
I have seen the discussion recommending "tab out of the Scale box" and tried it but entering <<tab>> has no effect.Â
Info:
MacBook Pro, 2009 15in/Intel core due/4Go/1067MH
