We have a Canon MF4380dn (similar to MF4370dn) and we cannot print to it from a MacBook Pro that is running Lion 10.7.3 We have tried connecting via USB and via network and have installed the latest UFR II 2.30 driver from Canon. We have completely removed the drivers and re-added them with no success. It can see the printer when it is connected either via USB or via network and it adds the software correctly. However, whenever we try to print a test page it seems to send it to the printer and then it immediately disappears and no page prints
I have an Intel iMac running OS 10.7.3 and I'm trying to print to a Canon IPF610 wide format printer. I keep getting a garodclfilter error : 3000. I can print to it from my old Mac G5 running 10.5.8 with no problems. I do have the latest driver installed from Canon's website and also tried reinstalling it several times without any luck.Â
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
I have an Airport Extreme Base Station set up that is connected to my modem. I purchased a new Airport Express that I have used to extend my network. I plugged my Canon MF8050cn printer into the USB port of the airport express. I've added the printer successfully, but when I try printing to the Canon via wifi, I get this error: Â
"Canon CMFP Printer Driver; Printer is not responding.Check the printer power and connection, and then try sending printing job again." Printer power is on and connected correctly. As a side note, I am able to print to the printer successfully when I plug the printer into my macbook air directly via USB. So I have two printers added, "Canon - USB" and "Canon - Wifi". The latter is the one that gives me the error. I purchased the airport express so I could print wirelessly as I'm unable to move my printer closer to the Base Station.Â
Info: AirPort Express 802.11n (1st Gen), Mac OS X (10.7.3)
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
I had to download software compatible with 10.7.4 in order to run a Canon iX6520 Printer, including Easy - PhotoPrint EX. It worked for a while, but now crashes every time I try to use it, just after clicking on "Print". How to correct this?
Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.
Sometimes it says not authorized some time it keeps on trying.Â
When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared . Â
I have a Dlink DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..
Info: MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
I am trying to print via wireless from my iPad (3rd generation) and iPhone 5 to my new canon MG3520 -- but it seems I have to set this up first to use with airprint? How to do that---? Â
OK I set-up the LAN (first connecting printer to the MacBook Pro running 10.8.5) via USB and then removed the USB cables so that now the iPad and the iPhone can select the printer - but it just prints blank sheets of paper and says there is an error each time.Â
Info: MacBook Pro, OS X Mountain Lion, Also a Mac SE running 6.0.4 - not upgrading that!
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
it's been a year I have been using a mac and I am 200% enthusiast about it, I also managed to solve all the problems, until now...
I have a black MacBook dated 2008, a Time capsule also dated 2009 and a Canon multifunctional device model i-Sensys MF 4140.
The MF4140 worked great until now when connected via USB.
Now I want to print wireless with the help of my Time capsule, so I connected the MF4140 to Time capsule but it doesn't work. I can see it in System preferences/Print & fax/add via Bonjour but I cannot find the proper driver in Print using...
I already downloaded the proper driver from the official Canon software/driver download web page or I hope so...
My boss inherited an iMac. It connects to his wireless network and will print a test page, but will not print anything else. He is running Snow Leopard.
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
I recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple" Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
All of a sudden I cannot print to my Canon MF4370dn. I am connected via the wifi network. I didnt have a problem with any of this until a week ago. I called Comcast and they told me that they connections were good. I know this is true since my ADT service is working just fine and it is connected to this network.Â
I called Canon and they are not supportive at all. They tried to uninstall and reinstall printer but it still did not work.
I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop.
I have a Canon Pixma MX700 connected to a PC and am able to print text/word files from my MAC to the printer via the router without any problems. However, whenever I try to print a document containing a table or a graphic, it doesn't print in the right place, and there is often a blue 'echo' of the table or image that also prints. I am currently using a gutenprint driver.
I have a Macbook air and my printer is a canon 6150.Â
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.Â
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.Â
How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer! Â
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.Â
I'm using OS X 10.7.3. I'm in System Preferences > Print & Scan. I click the + to add my Canon MX870, which is connected to my wireless network. I select it under "Nearby Printers". It says:Â
"Software for this printer is available from Apple. Would you like to download and install it?"Â
I click "Download and Install". When the progress bar reaches the end, it says:Â
"The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software."Â
So. I download the latest driver from Canon (version 10.51.2.0) and install it. I go back to add the printer, and I get the same message.Â
I then download the latest printer software from Apple (version 2.8, which includes MX870 series drivers version 10.51.2.0) and install them. I go back to add the printer, and I get the same message.Â
So. Instead of selecting it under "Nearby Printers", I choose "Add other printer or scanner", which brings up the "Add Printer" dialog box. My printer shows up as a "Bonjour Multifunction". I select it and "Print Using" defaults to "MX870 series". It says "The selected printer software is available from Apple. Click Add to download it and add this printer."Â
So. I click "Add". It goes through the motions again, eventually bringing me back to this:Â
"The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software."Â
All of the Bonjour settings are ON in the printer settings.Â
Using the Canon utilities still brings me to the "Add Printer" dialog box. How can I add this printer??
Canon says "due to certain incompatibilities between Mac OS X Lion (10.7) and our previously released Mac OS X 10.6 Printer and Fax drivers, you may not be able to print and an error log file will be generated that could potentially fill up the hard drive of your Macintosh computer."[url]
Printer software for canon MP830 is unavailable from Apple. I downloaded the driver from canon and installed it. It shows on the desktop, but I cannot add the printer. It keeps wanting to find the software at apple. How do I configure this to work?
Info: MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Canon MP830 printer
I have a Macbook Air running Lion. I have been struggling to set up a network printer that has worked for years on Windows and Linux clients (I think it worked with Snow Leopard as well). The set up is a Silex print server C-6200U+ v 2.3.1 with a Canon ip4300 connected to it's USB port. The driver is version 10.51.2.0 and CUPS is version1.5.1. All the latest revs. Currently other clients on the network print using LPR to queue 'lp' on a TCP/IP port. In Windows 7 this is all configurable though the gui with a mouse so I'm not doing anything clever. I have tried a number of iterations of set up on the Mac using CUPS Admin interface and also the System Preferences route. The closest to success has been to set it up as LPD protocol on a fixed ip address with queue 'lp', from this configuration I can successfully print a test page from CUPS or 'Print and Scan'. However when it comes to a 'real' print job from Preview or Word or Adobe, nothing much happens. The print queue says it is 'copying the Print Data' or similar but it just hangs indefinitely.Â
Info: MacBook Air (11-inch Late 2010), Mac OS X (10.7.1)