I have created a dmg of the disk (compressed/no encryption) using Disk Utility and have tried to burn to a DL DVD without success. I've searched this forum but was unable to find the correct procedure.
View 5 RepliesI had some bad experiences in the past with my first MacBook Air (version 2.1) in which external drives kept getting erased without any good reason. I think it's due to the fact that I had to connect a USB cord to another computer when I had an external drive plugged into the MBA because the MBA could not power it on its own.
I thought it was due to a bad external drive and I took it to Samsung service center and complained that their drive was malfunctioning. I got a refund. But later on, I found that the same thing happened to another external drive and to a USB flash drive, so I realized that it had nothing to do with the external disks and something to do with the computer. I used the same drives that got erased on a newer MacBook Air (version 3.2) and I never had the sudden erasure problem.
Anyhow that's the background to why I want to make a clone of the external disks in my possession. If for some reason, the external disk gets suddenly erased, I would like a copy somewhere in safekeeping so that I do not lose all my movies.
How do I make a clone of an external disk?
I will be using a MacBook Air (3.2) for this task. It has two USB ports. Can I use Carbon Copy Cloner to do this? Just choose a source disk (external disk I want to clone) and a destination disk (the external disk where I want it to be cloned to)?
Info:
MBA v 3.2, 256GB SSD, 2.13GHz, 4GB, Other OS, 10.6.8
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion.how to do this?
Info:
MacBook Pro, Mac OS X (10.6.8)
Update: "Magically," the backup is working over AirPort Disk. I'll chalk it up to a Snow Leopard ghost. I have been backing up to a WD My Book 1TB drive connected to my Airport Extreme router without any problems. Yesterday I upgraded to 10.6 (installed over 10.5.8, not a clean install) and have been having problems with Time Machine since. After the OS finished installing, I attempted to perform a wireless backup. Everything mounted properly, and it began a 10GB backup. When it got to around 5.8GB, Time Machine came up with a network error message (not sure which one exactly) and stopped the backup.
At this point I just connected the drive directly to my computer to perform the backup, and it did so without any hiccups. But now I can't even connect to the AirPort disk, let alone try to backup to it. Time Machine says it's not configured, and when I try to browse for my Time Machine Backup Disk it won't let me select it, even though the drive shows up in AirPort Utility. I've enclosed a screenshot of what I'm seeing. Does anyone have any tips to help me get this mounted and working again? This is not turning out to be as painfree an update as advertised.
For sharing my iPhoto Library among multiple users on a MacBook Pro running, currently 10.6.8, I have by a Apple Support guide created a disk image file, and mounted it for storing my pictures without permission issues.However, to account for future expansion, the disk image is made to be 100 GB, while current photo library size is approx 50 GB. Is there any way of getting Time Machine to backup the files within the mounted disk, rather than backing up the disk image file itself? So that the size of the backup at present would be the actual size of contents of the disk, rather than the whole disk image file itself? And furthermore, by copying a disk image file, will the actual files within also be backuped?
Info:
MacBook
Pro, Mac OS X (10.6.8)
This happens frequently lately: "Latest backup failed. Files couldn't be copied on backup-disk because it seems to be Read Only. After I "verify" the disk in Disk Utility, it works for a while, then the same problem. What can I do?
Info:
iMac, Mac OS X (10.6.8)
So i didnt really know where else to ask but my lightscribe software is not buring discs correctly under snow leopard. Im currently using the lacie disc labeler. I wanted to know if anyone else is experiencing the same problem or knows of any other software to try other than disclabel which is working somewhat but only allows me to burn a label the size of half the cd.
View 24 Replies View RelatedI am trying to use my Superdrive with my MacBook Air to copy a DVD movie to an external hard drive? Can someone direct me to an appropriate app or method to achiev this.
Info:
MacBook Air, iOS 5.0.1, am trying to copy dvd movies
When burning a DVD (e.g., MS Word files), is it possible to password protect the contents?
Info:
MC511LL; Intel 2.8GHz i5; 27, Mac OS X (10.6.8), HP 309g; WD MyBook x 3; SuperDuper; APC RS1500; TTP5.0.6; DiskW
This backup is too large for the backup disk. The backup requires 344.98 GB but only 216.11 GB are available.
Info:
iphone4, iOS 4, imac 24
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
I get the following message when attempting backup - the backup disk image"/volumes/data/rod Henderer's computer (5).sparsebundle" could not be accessed (error - 1)
Info:
time capsule, Mac OS X (10.7.3)
So my friend got me Snow Leopard for Christmas and I want to upgrade my mac from Leopard to this but is there a way to upgrade without doing a clean install? Mainly because right now I have no external HDD. Only just two 2GB USB Drives which I already used to backup my pictures and documents. But if something goes wrong during the installation is there a way to go back to Leopard?
View 2 Replies View RelatedWhen Snow Leopard comes out in september, I would like to completely reformat and install on the drive in my unibody macbook. I have a time capsule and would like to know whether or not someone can restore their mac from os x 10.5 to 10.6. Or my other option is to upgrade the os on my macbook and then back up the changed system files. Then I would restore from that backup, but I would rather just restore all of my non system files from my 10.5 backup.
View 2 Replies View RelatedIs there a way to keep a particular backup permanently? I'd like to keep a backup, but only one permanently.
View 4 Replies View RelatedI was wondering if there is away to burn full programs thats on my imac. I want to burn them to a cd for a backup just incase I need to reinstall I dont have to go and download them again. Need to burn them off the iMac and make them a full install cd.
Info:
iMac, Mac OS X (10.7.4)
I am trying to burn movies from iPhoto to a dvd for backup. I have attempted to do the export to another file method, then burn to DVD, but whenever I try the export, I get a list of 20 video files that were not exported. This is the only method I have been able to find that is supposed to work for getting movies out of iphoto and onto a disc.
View 4 Replies View Relatedpossible to back up all your data with Time Machine on Leopard and then install Snow Leopard and use Time Machine to restore all of your pictures/movies/music and the like?
I'm going to assume it's a no go since Time Machine is capable of a full system backup -- it may just turn your system back into Leopard?
I'm upgrading my mac to snow leopard but I don't really have a external hard drive to back up my data or the software to do the backup. Is it safe to do an upgrade without backing up?
View 4 Replies View RelatedPosting for a friend who has just purchased Snow Leopard Box Set and wants to upgrade from Tiger. She was half way through the installation when she thought that Snow Leopard had not asked her to back up and she cancelled the installation half way through (not sure how, think she just turned off her Mac). She turned it back on but the only option it is giving her is too continue with the installation of Snow Leopard.
What she wants to know is will the erase all her data on her hard drive, or will she still have her files located in Documents/ Downloads etc when the installation is complete. I know when I upgraded from Leopard all these files were still present, I'm not so sure if it is the same with Tiger. Shes really worried about this as she has some valuable files in there.
I have a Apple Time Capsule which is used as a Time Machine Backup Facility and also a Wireless Hub for File Sharing and Internet Connection. I've been using Leopard for a couple of years without any significant problems. The other day, I installed Snow Leopard and suddenly, I'm facing a number of different problems and errors regarding backups to the Time Machine with the Time Capsule.
First, I was facing problems with a Case Sensitive error and now that I have ejected the Time Capsule, the Disk Utility has come up with a different name altogether and now I have the added problem of disk space on the time capsule. I know I could re-format and start over but that would defeat the whole point of my backups. The Time Machine/Capsule should re-write over the old backups when making space for new ones but its just giving me an error about not enough disk space.
What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard? Does it slow down my Mac? Seems like someting has slowed down my Downloads, Updates, Backups, etc. & I don't know how to locate the source. Any Wizards avail to share some Wisdom? I am using Ethernet Cable/Port for Internet Connection, I Use a Seagate FreeAgent Go Flex Ultra-Portable Drive w/ Seagate's Firewire Adapter Cable.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have an usb flash drive backup for os snow leopard but I want to restore it for normal use, it can be done?
Info:
a1384 usb recovery, Mac OS X (10.6)
How do I get the backup arrow on my computer???
Info:MacBook, Mac OS X (10.6.8)
