I have a question. I am currently using a 10/100 router that is connected to the internet and has 8 ports. However I want to take advantage of my 1000 cards on my machines within my home network for transfering files back and forth. So here is my question. If I purchase a switch (10/100/1000), can I have the switch connecting my machines and then have the switch connect to the router to get to the internet? Is this possible? Or do I need something else?
If I select from the menu bar another available wireless network (one without a password for example) and then switch back to my own wi-fi network, am I still safe?
Did the fact that I connected to another network present any risks?
I did not send any private info during that time, any risks of getting hacked?
I just switched from DSL to Cable and had to buy a router for the cable modem. I can't get it to configure with my Mac Pro. It worked with my Macbook Pro after some fiddeling. It's a Netgear gigabit router. My Mac's normally just hook up to the networks.
Having trouble on my mac while trying to connect to the internet using the built in Ethernet.
It says under network: Built in Ethernet is currently active. Built in ethernet has a self assigned IP address and may not be able to connect to the internet.
I hit the IPv6 and/or DHCP and it locates a IP just not a router number. Is this what is stopping it from connecting? Please help as I have an AP test I would like to study for....
My current setup is a first gen TC running at 802.11n 5GHz with a Linksys WRT54GS in bridge mode broadcasting 802.11b/g. Both are WPA2 networks, and the setup has been great so far.
When the new AEBS/TC came out, I was looking at the guest network capability and that's got me wondering if there's any way I can create such a network with my setup. I would love to have a network for my DS and PSP to be able to join and would preferably like to have it unsecured to avoid connection issues.
I'm well aware that my TC doesn't have the proper hardware to do that by itself, but is there any way I can create a guest network to allow access to the Internet but not any networked computers on the main network? Would I need a seperate router to do this, or would my current setup be sufficient? What settings would I need, or can this even be done?
Come to think of it, would it just be easier for me to setup an additional gateway using a third router, hide the SSID and have it unsecured? (Although I'd be afraid of compromising my network's security with this method.)
Is it possible for me to setup a wireless network/connection from my White Macbook to an Apple TV to share iTunes content WITHOUT a wireless router?
I'm house sitting for a month at Xmas, and they don't have internet in their place (they do, but its one of those wireless dongle things for a laptop)
Don't want Internet, i just want to be able to use my AppleTV i'm getting for xmas for all my media streaming without having to wait till i get my own place a few weeks later!
I have an Airport Express base station but its on a ship coming from London and wont arrive for a few more weeks
Till then looking for a simple (and free) solution
My friend bought a new netgear router today. He plugged it in and was ready to get on the internet. The problem is, he can't get on the internet. He is able to connect to the router though. We also tried unplugging the router from the modem and plugging the ethernet straight into his Macbook Pro. From there the internet works perfectly. It is like the modem and the router are not connecting.
Tried googling this with no luck. I'm new to the mac/laptop world. My new mac keeps picking my neighbor's network over mine. It (obviously) fails to connect to the neighbors router coz password is required. I then have to scroll down a list of networks and instruct my computer to connect to my router. Is there a way to simplify my life...
I have a ADSL router wish is configured in bridging mode and I want to use my Time Capsule as router.
For some reason Time Capsule is complaining about my setup. I've tried all kinds of different settings but I haven't had much success.
The ADSL router must be configured correctly because I have a Netgear Wlan router wish works just fine with the same setup. The Netgear is to be replaced with the Time Capsule now.
I've been struggeling for hours and I'm out of ideas
Our company is currently running an Apple Time Capsule that has ~40 users wirelessly connecting to it. Now we recently opened up a new office space that will potentially have more than 50 users that need to connect to our network.
Seeing this we then purchased a Linksys WRT610N wireless router so that we can facilitate more than 50 wireless users. My question therefore is: how do we set this up so that the Linksys router connects to the TC so that we will subsequently be connected to the Internet as well as our network - no matter what SSID (TC or Linksys) we're on. I've been bearing about bridge modes and WAN ports but this is new to us so a brief explanation/procedure would be appreciated.
Keep in mind that we would like to keep the TC as our main router with the Linksys connected to that as well as increase the TC limit of the 50-user connectivity limit.
I just purchased my new macbook pro and I wanted to know if it was possible to use the laptop as a router so that my PS3 could connect through it. I followed the steps someone else mentioned:
(1) Open System Preferences on your MacBook Pro, and open "Sharing"
(2) On the left column, click Internet Sharing and check the box
(3) Use the drop-down menu to select Ethernet in "Share your connection from..."
(4) Check the box next to Airport in the section "To computers using..."
(5) Close System Preferences and open the Airport menu from your Toolbar (top)
(6) Click "Create Network", add a name to your Computer-to-Computer network
(7) Leave the Channel as Automatic, add a password if you require (make sure your PS3 is compatible with your chosen level of security), click Ok.
(8) Connect an ethernet cable between your broadband modem and MacBook Pro
(9) Turn on your PS3 and perform your usual setup when connecting to a wireless network
I have an Ipod, and it did detect the new connection that was setup; however, my PS3 and my Windows Mobile phone did not detect it. Is there a reason for this? Do only Apple devices identify this connection?
After extensive Googling, I need to take a break, and find out if someone with more experience knows what I can try next...
I'm not the best when it comes to Networks, or even router configuration. I'll just put that out there, in case I've missed something obvious.
My router connection (DLink 2640B) was working perfectly fine before I upgraded to Snow Leopard. Now I cannot connect to any wireless network, and I cannot connect to the router administration page, either
(192.168.1.1).
The internet connection still works fine on two other laptops. Also, I can connect this iMac via the ethernet cable.
I've tried deleting the files NetworkInterfaces.plist, com.apple.network.identification.plist, and preferences.plist; I've tried rebooting my router; I've tried creating a new network. Airport sees all the networks, tries to connect, then it just says that it fails.
I've lived in an apartment for the past year that is connected directly to our university network. I have an airport extreme router that I've tried to set up responsibly with no SSID broadcast, WPA2 with extremely difficult password, transmission power set to 25% etc. It has also been set to 'share a public IP address" and everything has so far worked smoothly.
Recently, however, all apartments in the complex received letters saying that there had been disruptions on the network and that it was most likely due to wifi routers -- which are NOT permitted. If we temporarily disregard that ban, is it possible that my router is causing any disruption? And, if so, what could I do differently to ensure that it does not?
I've tried setting it to bridge mode, but that does not work at all. We are allowed to register 10 mac addresses and I have registered all my devices, but in bridge mode none of them can connect . As I understand it, in bridge mode the university servers are distributing IP addresses to devices that are registered on the network -- is that correct? Then what could be the reason for bridge mode not working if my devices were registered properly?
My main question is whether my router could be causing problems with the above setup?
Basically what I wanna know is: Can I configure time machine to back up to a hard disk that is connected to my router? I guess essentially I'm trying to make a homemade time capsule. Is this possible and if so, how?
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
my router is linksys and i want to let my airport express join the network created by linksys wirelessly, would that be done? i was told at apple store that airport can extend existing network, what the problem is?
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
Sometimes restarting is not enough: you need to power off your Mac, wait for a little, and power it on again.It could be a script which act like the "schedule" program in system preferences: it would switch off the Mac immediately, the add 1 minute to the current time and switch it on again.
What is the best router to have for my iMac 27", 3.06 gig? I currently have a Belkin N1 Wireless Router, but it has been acting up lately, dropping my connection, requiring disconnect/re-connect.
Right now I have an old router/modem. And I want to buy a new one that has QoS...i found Linksys WRT54GL. But it has no ADSL modem...So I am asking you, Is it possible to connect this linksys router to my router/modem? But in way, that the router/modem will no longer be a router, but only a modem.
I just recently got Verizon Fios internet. I am having a problem with making the router they supplied my default router.I am not trying to piggy back or connect additional routers. I just want to use the Fios router.Prior to Fios, I had Time Warner and i used my own router and as soon as I opened up my macbook, it would immediately find that router as my default. Now, with Fios, when i open my "Airport" icon at the top on my screen, it NEVER choses my Fios router as my default, making me change to it every time i want to use my internet after opening up my computer.
And i have a Wireless Router from Netgear is there any way i can make both the modem and router to work together using Netgears router because the one verizon sent me always loses connection and i just dont like how it operates. I had my old modem working perfectly with the Net gear router but i guess since this has a built in Router it automatically makes it use it
I have a MacBookPro that I use in my room connected through ethernet. I am at university and they have only allow one machine to connect to their wi-fi that is available across campus, through mac address filtering. I also have an iPhone which I would love to use wi-fi on, at least while I am in my room lounging around and such. Anyway, the point being, can I use my MBP (connected through LAN) to act as a router so that my iPhone can connect to it? Essentially create a wireless network, so iPhone would find it and I could go online on it via wi-fi?
I tried going on Airport and clicking on "Create a network" (w/o a password), but I get an error saying "There was an error creating our Computer-to-Computer network." It doesn't say much else -- is there a better way of doing this?
Upstairs I have my AT&T provided router's wireless turned off and have plugged my Airport Extreme into the ethernet in DMZ mode. Wireless works fine in the house.Downstairs my Xbox 360's ethernet cable is plugged into my AT&T provided set-top box (receiver/DVR) and internet works fine on that. I cannot stream my media (using 360 Connect) from my mac to my xbox since they are on different networks, although using the same U-verse connection.When checking the AT&T router's system summary page I can see that there is an IP assigned to the xbox.
I have a Netgear Wireless G Router and was wondering if this is sufficiant or is there something out now that is faster/better. Mainly used for my macbook and wife pc laptop and 2 IPhones.
I just built a PC that actually works. However, I was really cheap and didn't wanna buy a wireless access card, thinking I could connect to an extra router and use this router to connect to my other router that's network enabled. Is this possible, and if so, how would I go about doing it? I tried googling it, but I dunno what this is called.
I have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
