After hours of fooling around with my Epson All-in-One scanner/printer I found out that Apple does not support Airport Extreme network scanner functions. Is there a hack or a workaround besides connecting the Epson directly to my Mac?
View 2 Replies
I keep noticing that my MacBook keeps scanning for the network I'm currently signed on to. Is this behavior normal or should I take it in to the Mac store.
View 24 Replies View RelatedI'm interested in purchasing an Airport Extreme but I'm wondering, does Airport Extreme support Xbox 360?
View 9 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Can I connect a USB hard drive and printer to it at the same time ?
View 4 Replies View RelatedHere is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
Is it possible to plug three Xbox 360s into an AirPort Extreme for the purposes of system link and Xbox LIVE for each of them?
View 4 Replies View RelatedI want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies View RelatedI recently got a PowerPC G4 from a family member and reinstalled Mac OS X 10.5. I did this without the Airport Extreme card installed. After installation I put the card in, and after booting up I thought the card would be recognized. I was wrong. Any suggestions besides that the card might be bad, that I can do to fix this? The card works on other machines.
View 1 Replies View RelatedI recently replaced my aging linksys G router with an Airport extreme. I have an HP 2605dn printer connected to it via ethernet. When I set this up with the old router everything worked great, printer showed up in OSX and added with a couple of clicks. Now that I have moved to the airport I cannot find the printer at all from OSX on either my MacBook Pro with 10.6 or my Powerbook with 10.5. However all of the Windows 7 machines I have in the house see it and print fine. I feel like I'm missing something very simple and help would be amazing.
View 6 Replies View RelatedMy home network is using a Netgear wireless router, which is just used for sharing the internet. I was wondering if Airport Extremes could be placed in another room to connect to a USB hard drive and share it, as well as extending the internet from my Netgear wireless?
View 12 Replies View RelatedI already have an airport extreme to go along with my new alum macbook. But my wife's pc laptop and my iphone are only G wireless and not N so when they are in use it slows the network way down. If I bought an airport express could I link them together on the same network (to share printer and HD on the extreme) and have one handle the N traffic and one handle the G traffic?
View 8 Replies View RelatedMy university says the ethernet network that they supply in uni halls of accomodation does not allow wireless devices, surely they can't make it so that you cant use an airport extreme or some other device to make the wired network in to a wireless one. The connection is through a proxy and uses PEAP. They also use 802.11X authentication. How can i use my airport extreme in my room so i can use my laptop wirelessly?
View 2 Replies View RelatedI just bought an Airport Extreme.I have two desktops (wired) and a laptop (wireless).They all can connect to the internet fine (wired and wirelessly respectively). But there is no network (file sharing, itunes sharing, etc.)
I was under the impression that the difference between the AP extreme and AP express was that the extreme is also a router (capable of creating a network).
Can I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G. My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds? Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I am in need of some help with my AEBS v2. I just bought it today and a little bit confused coming from a Linksys.I have an HP Photosmart C4480 and setup the printing and it works with my MBP but when I try to add it for my sister's Windows XP laptop it can't find the printer whatsoever even with bonjour installed and all. I'm in need of your assistance to get it working.
View 2 Replies View RelatedI want to test the range of an AE base station at a theatre that I'm installing wi-fi for. I'm wi-fi challenged, so the AE was my choice when setting up my home network. I may need to extend the theatre's network with an Airport Express, but want to test the range of it with my AE base station from home. (Got that?) [oh, and it's a theatre I work for and am installing all sorts of fun goodies. I'm good with stuff but wifi makes me corky thatcher. -ed]Since I'm wi-fi challenged, will it totally mess up my settings on my home network if I try to use it at the theatre? If it will, then I'll just buy a fresh one for the theatre and see after that if I need an express. I'd just like to run to the apple store once, not twice
View 5 Replies View RelatedI'm not very well versed in networking or IP stuff, but maybe someone can help me. I have an airport extreme running the wireless network in my house. I know my IP number (it changes, but I'm switching to a static #). Is there a way I can access my network over the internet through the airport extreme? I have a mini-server device running on my network that utilizes port 80 and I'm sure there's some way to read that over the internet. (if I'm using the wireless network, I use address http://10.0.1.3/webpage.html to view) Is there a way to view that address from the internet? And lastly, if am I opening up a can of security worms if I try this?
View 2 Replies View RelatedThis is driving me insane. Just got a new Centrino laptop (obviously with wireless), but it refuses to see the AirPort network. I have reset the base station so there is no encryption of anykind, but still no joy.
Is there anything that needs to be set on the AirPort for this to work?
I can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies View RelatedI finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
I just purchased my first Mac: 13" macbookpro. I got a time capsule with it as well, but cannot set up my macbook to connect to the internet. I connected my desktop pc with windows XP via ethernet just fine. But I cannot get the wireless network to popup on my airport extreme.
View 7 Replies View RelatedCan the new Time Capsule be used as a stand alone router or do I have to connect it to my existing Sky router?
I believe people on here call it bridging.
Can I use Airport express with it to extend my network or will I still need the Extreme?
I just set up my Airport Extreme, which is connected to my modem, and created a new network. The problem is that when I connect my MBP to my new network, it doesn't prompt for the password which I have set to WPA2. I'm not sure if it's the cause, but I called my ISP about my Airport Extreme previously finding an invalid IP address and just overall not working. He told me that it's strangely acting like a hub instead of a router which he said is not secure. I'm not really sure what he meant but he doesn't seem to know how to fix it. I can connect to the internet but the problem is that there is absolutely not security and perhaps that's the cause of the airport acting weird?
View 3 Replies View RelatedI apologize in advance if this has been answered before (I couldn't find an answer using search). I have an Airport Extreme wireless network in my home that works great. I just got an xbox 360 with the latest wireless adapter ("N" type) and when I try to set up the xbox to work wirelessly, the setup "fails" - xbox either can't "see" my home wireless network or else can't attach to it. Any suggestions how I can fix this problem?
View 7 Replies View RelatedI bought the Airport extreme and I can connect from my MBP only when setting the radio mode to:
-802.11n only (5 Ghz)
or
-802.11 (802.11a compatible)
My iBook and Pismo boxes cannot even see the wirless network at all. It is not a closed network and when selecting Other to connect and entering my WPA password I get an error.
To date I've used an airport express as a wireless router for my macbook and macbook pro. Both have been manually backed up routinely on external hard drives. I use the macbook as my main media center/media storage and the hard drive is starting is nearly full. I'd like to set up a system where I move my media to an external hard drive and also automate the backup of the mb, mbp, and external hard drive. Would time capsule be the best approach for this and will it backup an external hard drive tied to its usb port. Alternatively, could I tie 2 external hard drives through a usb hub into airport extreme, using one for backing up the laptops and the other external drive?
View 5 Replies View RelatedI made an addition on my house and the reception in the new area is weak, can I purchase two MB763LL/A wifi units and then have them talk to each other (I can run a cable between the two units if that speeds up the network, currently the sheetrock is not installed on the addition).
Warm regards,
David Cappell
I just bought 3 airports: 2 new double band Airports extreme and 1 "N" airport express.
I have one of the Airport Extreme #1 connected to the DSL router and have configured the network, both 5 and 2.4 I have the Airpot Extreme #2 to expand the signal of the network (I realized that the Airpot Extreme as a bridge it only can replicate one of the networks 5 or 2.4. Is replicatiog the 2.4 network).
