OS X :: File Transfer Rate Between MBP (late2009) And External Is Extremely Slow?
Jul 13, 2010
I am wondering why my MBP takes about 7-8 mins to copy 700 mb files from the external (Seagate FreeAgent pro 500 Gb) and of course, it takes about 1 hour to copy 7 Gb files.
However, this problem has occurred only copying file from external to my MBP, the transfer rate is fine when copying files from MBP to external
Note : I've already repair the disk by using disk utilities, but it doesn't help me at all.
View 5 Replies
ADVERTISEMENT
Sep 30, 2010
I am trying to use a WD Elements external HD formatted to Mac OS Extended, and the box says that the HD should have a USB 2.0 adapter, meaning it should transfer over 400 MB/s. Unfortunately for me, I've had many problems with this HD and it is now crawling at around 2.5MB/s, slower than 1.1 speeds. At the moment, it is at 750MB/93.51GB - About 21 hours. This is unexceptable, and I make HD videos, which are usually from 200 - 500 MB, and this would take AGES! I had no problems on my PC with this drive. Please help me! Should I format it to something else, get a new one, or something else? Please leave your suggestions below. Also, if you have an HD that works well, please leave it below,
P.S. All ports are free, except for the one with the HD in it. All that I have hooked up to my Late-2009 21.5" iMac is my wireless Apple keyboard, and my Magic Mouse. Nothing else hooked up to the computer AT ALL!
View 8 Replies
View Related
Nov 5, 2007
I have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
Information:
G5 Tower
Mac OS X (10.4.10)
View 9 Replies
View Related
Apr 23, 2009
This ended up being pretty long but I tried to include as many details as possible. If any more information is needed please just let me know in this thread. I have been trying to figure this out all day and it has been driving me nuts. First of all I have a Macbook with a 2.4GHz Intel Core 2 Duo processor, 4 GB of RAM and am running Mac OS X Version 10.5.6. Also this is the last generation of the "white" macbook that came out in February I believe of last year.
My external HD is a 1TB Rock Mobile Disk. For some reason when I try to transfer files to or from the external HD to my Mac I am getting nowhere near the expected 480MB/s. I do use a Swiss Gear 4-port USB splitter. When I use the splitter I am getting a transfer rate of about 120MB/s and without it I am only getting about 300MB/s. This is of course if I am only trying to transfer one 800MB movie. If I attempt to transfer multiple seasons of television shows it will drop to as low as 40-50MB/s. Also, if I were to be transferring a single season of a TV show. The transfer speed is much faster to click and drag every episode from my HD to my Mac than it is to transfer the entire folder at once. The whole folder might take 25 minutes but one at a time it will only take about 5.
View 3 Replies
View Related
Apr 25, 2009
I did some experimenting this evening to assess data transfer rates to various storage items in my home network which uses a new Time Capsule as the router/hub.
Connected to the Time Capsule are the following:
- Mac Pro (GigE)
- Vista Machine (GigE)
- MBA (Wifi)
- Raptor Drive (USB 2)
- Time Capsule Drive (Internal)
Transferring a 650MB file between devices yielded the following results:
MP > Vista (GigE) = 288 Mbps
MP > MBA (5GHz) = 52 Mbps
MP > MBA (2.4GHz) = 43 Mbps
MP > Raptor (TC USB) = 38 Mbps
MP > TC Drive (Internal) = 38 Mbps
MBA (5GHz) > TC Drive (Internal) = 22 Mbps
It seems that transferring files to a USB drive or the internal drive on the Time Capsule is painfully slow. It took 2:20 to transfer the 650MB file to the Time Capsule over GigE vs. 0:20 seconds to another machine. What's worse, is that the data transfer speeds to the TC are a function of link speed, the slower your connection, the slower your transfer rates. It's not simply limited by some bottle-neck in the TC. It took 3:45 to transfer the same file to the TC from the MacBook Air over the 5GHz WiFi connection. When I complained about this the other day at the Apple store, the "Genius" said that it's due to QOS built into the router to ensure it doesn't kill my web browsing.
View 16 Replies
View Related
Oct 8, 2009
I am deciding to buy a TimeCapsule within next week because my Seagate FreeAgent 500 Gb is already full. But I still not sure about its functionality and warranty coverage.1. How about the file transfer rate in wireless mode(802.11n)?2. Can I use the USB port of TimeCapsule with my old Seagate FreeAgent to expand the capacity?3. Is there any way to install a bittorrent software on TimeCapsule? like Asus WL-500W4. Is it fully support Windows XP?5. Can I use it as a repeater? Is this an option provided in Airport utility?6. I have just purchased an AppleCare for my MACBook pro but I am not sure about it coverage.
View 1 Replies
View Related
Mar 11, 2010
So I have a late 2008 MBP and the battery is draining way faster than it should. Coconut battery says that my battery capacity is at 93% and it only has 73 cycles but the battery has only been lasting 3 hours at best with a full charge, but most typically, it only lasts 2 hours while using the 9400m GPU and at idle. I have reset the battery per apple's instructions 2 times now and I have reset the SMC multiple times. this is what the system profiler says about my power capacity and consumption:
Model Information:
Serial Number:6N839TV313EB
Manufacturer:SMP
Device name:bq20z951
Pack Lot Code:0000
PCB Lot Code:0000
Firmware Version:002a
Hardware Revision:000a
Cell Revision:0100
Charge Information:
Charge remaining (mAh):3522
Fully charged:No
Charging:No
Full charge capacity (mAh):4226
Health Information:
Cycle count:72
Condition:Normal
Battery Installed:Yes
Amperage (mA):-1449
Voltage (mV):11830
This all happened out of nowhere one day, I used to get a solid 5 hours on each charge a month ago and now this.
View 12 Replies
View Related
Apr 4, 2012
The hard drive on my iMac is filling to capacity at an extremely accelerated rate. In order to have functionality, I had to delete some unnecessary files and used WhatSize to try and determine the culprit. When backing up my hard drive yesterday, Mail was showing to be 91G. The hard drive filled up again a few minutes later so I copied iTunes to an external drive for safe keeping freeing up 85G.
By this morning that was gone as well so I copied contents of Pictures over to external hard drive freeing up 189G. Mail is now up to 244G on my 500G hard drive. I rebooted at that point to see if that would stop the growth and it has currently, but it may start again. WhatSize says there are no duplicates. I am receiving and sending the same amount of mail that I usually do on a daily basis, so that is not the problem.
Info:
iMac, Mac OS X (10.7.3), Mail
View 1 Replies
View Related
Dec 9, 2010
I have an iMac and MBP. When I transfer files over the network (wireless) from one computer to the other, it is quite slow. I think around 1~1.5mb/sec. Is this normal or expected performance on file transfer via wireless? If so what can I do to increase the performance? Settings on the wireless router?
View 1 Replies
View Related
Feb 3, 2008
After some searching, I've seen three tricks: disabling IPV6 on the Mac, doing the same on the PC (my Windows Server 2003 installation didn't have it installed), and adding a line to my /etc/smb.conf file. None seem to really give me full transfer speeds.
Are there any tricks specific to Windows Server 2003 or anything new to make this work like normal? It's simple file transfer over SMB, seems like at the 5th iteration of Mac OS X we'd have better speeds.
View 9 Replies
View Related
Jul 4, 2009
I first submitted this in another section of the forums thinking it had to do with my external HD, to only find out later it's a problem across my entire iMac, not just the external. It's nearly impossible to transfer files from anything other than my internal HD *to* my internal HD. What I mean is, when I try to move a file from my external HD, a shared computer via ethernet, or a mounted .dmg, it's transferring at something like 1mb per second or less. I got my copy of Leopard (10.5.6) 2 Fridays ago (I know, I'm late), and first did an upgrade. Everything was wonky, so I did an archive & install. Everything was still a little unstable feeling, so I opted for a clean install. I moved all my precious files over to my LaCie FW HD, confirmed them, and started onto the clean install and let that run while I slept. When I woke up, I had a brand new fresh installation of Leopard with the glorious BG, and I couldn't have been happier.
I started to move my files over manually (I wasn't using the migration assistance because I was organizing my files as I went considering time was not an issue), and first on the list was my music. I opened up iTunes, set my prefs, and started to import from my external HD. ..I just assumed it was taking a long time because I had around 7000 files of both music and video. But when I went to work, came home, took a nap, woke up, and it still wasn't done, it made me wonder. I assumed it was Spotlight doing it's thing on top of the iTunes import, and left it alone. But now when I'm trying to move over files only a few mbs, it slows to a halt. I tried to install Adium from a .dmg by first moving it into my Applications folder.. it's something like 50mb and it took about 10m. I had been expecting to drag the icon over and here that "ding" you hear when a file has successfully moved. The funny thing about this is that, when I look at the Activity Monitor, nothing's really doing much of anything. So then why is it taking 5hrs to move over a few gigs? Here's a screen shot:
View 24 Replies
View Related
Aug 5, 2009
purchased a Time Capsule today for use with my MBP. it is super super slow.. I can't believe it. How come there were so many good reviews on the Apple site? I hooked it up via ethernet cable, NOT via wireless and it's as slow as this. right now it's showing 3.4mb and 17 000 hours.
View 5 Replies
View Related
Aug 1, 2009
just got my 17" MBP today and it's beautiful. Playing a lot learning a lot (my first mac). Having one big headache though.What's up with the wireless speeds? I did some file copying from my Vista machine connected via ethernet and speeds were fine. Now I'm trying to copy some stuff from my girlfriends iMac over wireless (using a linksys wrt54g, both connected at G) and it's just balls slow. I'm talking about a meg a second, the hell?Now, what's really making me upset is the fact that it's also crippling my internet speeds when I'm doing this wireless to wireless file copy. It's like it's pegged so bad at the super fast 1mb/sec that I can't even browse the web without it timing out half the time. Internet is fine when the file copy is not happening.
View 4 Replies
View Related
Nov 30, 2008
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little.
Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
System: Mac Pro (early 2008) Mac OS X (10.5.5) 3.2Ghz 8-core - 16GB Ram - 4x1TB SATA - GeForce 8800GT - Dell 30" 3008WFP A02 - Gateway 21" FPD2185W - 3xMyBook external drives
View 8 Replies
View Related
Mar 28, 2008
I just installed Vista on my Mac Pro (2.8 GHz Octo, 4 GB RAM, 8800 GT, 500 GB Caviar SE from WD) and I get 5.9's for everything but "Disk data transfer rate" - which is a 5.7. I know that is nothing to complain about, but I am just wondering what would earn a 5.9? Would it take a raptor to do that? Or just mine is not all that fast or something?
View 19 Replies
View Related
Dec 3, 2009
Not sure what I did to cause this, but all of sudden the front side USB ports have reduced transfer rates.
What can cause this issue all of sudden?
View 1 Replies
View Related
Feb 24, 2009
I just installed a new Hitachi E7K1000 1GB HD into my Powermac G5. I then found out my Powermac only uses drives at the 1.5GB transfer speed rate... i checked the specs for the hitachi drive at OWC and it says it is 3.0GB, not a 1.5/3.0GB hybrid. Could this cause trouble? The drive seems to be working fine so far... but does this mean this hitachi drive is not compatible with my mac?
View 2 Replies
View Related
Apr 10, 2012
I am transferring my iPhoto library to an external hard drive and it is agonizingly slow. Â
I am attempting to make room on our iMac so am moving our 193 GB iPhoto library to our Seagate 2TB external hard drive. The drive is brand new AND is formated properly as Mac OS Extended (Journaled) but the current copy estimate is for it be completed in over 80 hours. I dont beleive the drive is broken as data is continuing to be transferred and not completely hung up. Â
When I transfer other folders/files the process is much much faster. Problem only seems to be with iPhoto library that I have found. Â
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
May 28, 2012
My 2.4 ghz IMac is showing a transmit rate of only 78 on our wireless network while my Macbook seems to work fine in the same location with a rate of 130. Is there any way to increase the speed or is their something wrong with my airport, should be faster. When selecting the option key and clicking on the aiport symbol it shows the following data.
0:8b:5d:af:35:22
Channel 3
RSSI: -72
Transmit Rate: 78
Out router is a BT Home hub, while the modem attached to it is an Echolife HG-612.
Info:
iMac, Mac OS X (10.5.8), 2.4ghz, 1 GB 800 MHz DDR2 SDRAM
View 1 Replies
View Related
Dec 16, 2008
How can I find out what my transfer rate is for ethernet and wireless. I switched over to Time Capsule and all N network?
Also, how can you tell if you have the gigabyte cable or the regular cat 5 cable?
View 1 Replies
View Related
May 19, 2010
Has anyone come across any Firewire memory keys? (Similar to the USB Keys we have now days). Firewire has a much higher transfer rate than USB 2.0, so I was wondering if any company made the firewire memory keys. I did a quick google search but didn't come up with anything recent. All the articles I read were from years ago.
View 4 Replies
View Related
Jul 25, 2010
Is there any way to show the current transfer speeds when copying a file to an external HD for example? Or if not possibly any app?
View 1 Replies
View Related
May 25, 2009
I am doing an initial back up for Time Machine. I've got 56Gigs worth of data to back up from my 2Ghz Uni Body MacBook (with 4gig of Ram & running OS 10.5.7). I have a newly purchased Airport Extreme base station to which is connected to a Western Digital 1 Gig External HD. I am getting a transfer rate of about 1 gig per hour. Is it really this slow? I am using a 5Ghz network to reduce interference and they are very close to each other.
I tried connecting the WD drive to the MB. After I switched off Virus Barrier V5 and stopped Spotlight indexing it was quite fast. However there didn't seem a way of tricking this backup to think it was done via Airport Extreme. How could this be done?
It looks like my MB is going to have to be left on and stay at home for the next couple of days!
View 9 Replies
View Related
Mar 21, 2009
my Mac's start up is fine, until I get the the window with the bar that says "OS X starting up". This is the *really* slow bit. I am grateful for the fact that my old Power Mac is yet still faster at starting than my PC, but it is a whole lot slower than it should be. When I say "should be", all the Macs at school, or at the apple shop barely show the start up bar window. Ok, granted that they are a great deal newer and faster, but after a clean install of OS X on my machine, that bar was there for a maximum of 5 seconds. Now it usually takes 20-30 seconds.
Right, on to the things I have already tried:
* Cleaning out login items
* Turning off auto login
* Checking all my fonts
* Disabling the unused fonts
* Cleaning cache files and restarting twice
* Unplugging all of my hardware, bar the monitor
Even after trying everything on this list, plus a few hundred restarts, it is still booting up slowly. Does anybody have anymore ideas? Also, if somebody could please let me know where the log for system start up is stored, I will look through it and post it. Also, I should note that I am running OS X 10.4.11 'Tiger'.
View 3 Replies
View Related
Jul 9, 2010
I don't really know what is wrong, it's a fresh installation and it's just extremely laggy, liquify is slow as heck, drawing and doing anything is just choppy or buggy. Heck, my MB is more than decent for PS, so I don't know what is going on!
CS4 ran fine with no lag, and CS3 on my old p4 with 512mb ram runs smooth as silk with no lag, even when I use liquify, and even then it's only allowed to use 170mb of it.
I know this is a well known problem and I am not the only one, but I just wanted to know what exactly is the problem if anybody has managed to fix it, and a lot of the menu's and window structures are a bit off/messed up as well, it seems to me that a lot of unneeded yet subtle changes were made, and it's annoying as well.
View 9 Replies
View Related
Sep 22, 2010
I have plugged in my External drive to my MacBook Pro, and it's all fine when I open the files in it. But as I try to transfer files to my hard drive, it won't transfer. Instead it keeps denied and the same goes when I try to transfer some files to another persons hard drive.
View 1 Replies
View Related
Nov 30, 2014
How do I transfer video files from one external hard drive to another external hard drive? OS X 10.9.5. I opened up each device in a finder window and tried to drag and drop from one device to the other. No luck. Next, I R-clicked on the file and requested to copy it, then R-clicked on the Finder of the destination drive, hoping to paste but that option did not present. I am able to paste a file onto the desktop from the original location but I cannot move it from there onto the destination drive. Full disclosure: I began this operation using a Windows laptop with no difficulties. Both drives are dual formatted. The destination drive is 2 Tb and has 1.5 Tb remaining space.
Info:
iMac (27-inch Late 2009), OS X Mavericks (10.9.5)
View 5 Replies
View Related
Feb 25, 2008
I was wondering if there was any improvements choosing an Express Card to eSata over using Firewire 800?
This card states a transfer rate on the card up to 300 mbps which is nowhere near the 800 mbps that Fw800 will give?
View 2 Replies
View Related
Dec 18, 2010
So i just got my macbook air today, and im loving it. The only problem is that the internet on this thing is SLOW. I have pretty decent internet at home, both my pc and macbook pro (2007) is fine. But on the MBA, a normal website takes minutes before being completely loaded. I just tested all my computers on speedtest.net, and my mbp was able to get 11.86download and 0.84upload, while my MBA get 0.45download and 0.15upload Is anyone else getting this problem?
View 6 Replies
View Related
May 28, 2009
I just did a clean install of the mac and I'm noticing it is extremely slow at copying files back from an External HDD. It is on USB 2.0 connection, and still going maybe 10MB/minute. This is the speed I'd expect from a 1.0 connection. I've checked the wires, everything is connected. I thought maybe I'd speed it up by using an External DVD drive to copy the 20GB music library back from the DVDs rather than the external -- but the external DVD drive showed the same slow speed. The drive didn't even seem to spin up to read faster (like it normally would, it reads/writes quicker than the slot drive on the imac).
It just ran as slow as possible, with the same slow transfer rate. I've been going for a couple hours or more now, and only have 4GB of 16 copied over. I'm guessing there could be a reason for this that I'm missing. It's a fresh install, all updates installed on this Tiger 10.4.11 OS X. External is formatted HFS+ and the iTunes library does not contain any single file over 4 GB, or even close to 1GB. (just music/library files). There has been no problem with the media before.
View 6 Replies
View Related
