I just installed Vista on my Mac Pro (2.8 GHz Octo, 4 GB RAM, 8800 GT, 500 GB Caviar SE from WD) and I get 5.9's for everything but "Disk data transfer rate" - which is a 5.7. I know that is nothing to complain about, but I am just wondering what would earn a 5.9? Would it take a raptor to do that? Or just mine is not all that fast or something?
View 19 RepliesI have used the disk for a number of years - all appeared to work fine - I am now backing up my data and only get Very slow transfer speed using firewire 800 - 2 hrs to transfer 1.36 Gb. Disk is connected to a Dual 1.8 Ghz Power PC G5 with firewire 800 - another d2 disk is connected to it with firewire 400 and I have just connected a Maxtor disk using firewire 400 to that. I have tried Updated the firmware (it did require it), tested the device alone on both 800 and 400 connections both slow. Restarted everything and used disk repair to check and repair the disks - repaired permissions on the startup disk.
Connected all the devices together again | LaCie 800 - LaCie 400 - and Maxtor 400. It sends data to all the other devices fast (~ 3 min for 1.6 Gb) through the LaCie 800 disk connection!, but does not send data to the LaCie 800 fast at all. Tested the other devices alone as well - they are all fast. Have also performed a TechTool Pro Ver 4 test on the the disk (Disk type ST325082 3A 232.89 Gb LaCie d2 External LUN0 revision 3.03) Passed the surface scan, disk controller and read write tests. Is the disk failing?
Information:
G5 Tower
Mac OS X (10.4.10)
I did some experimenting this evening to assess data transfer rates to various storage items in my home network which uses a new Time Capsule as the router/hub.
Connected to the Time Capsule are the following:
- Mac Pro (GigE)
- Vista Machine (GigE)
- MBA (Wifi)
- Raptor Drive (USB 2)
- Time Capsule Drive (Internal)
Transferring a 650MB file between devices yielded the following results:
MP > Vista (GigE) = 288 Mbps
MP > MBA (5GHz) = 52 Mbps
MP > MBA (2.4GHz) = 43 Mbps
MP > Raptor (TC USB) = 38 Mbps
MP > TC Drive (Internal) = 38 Mbps
MBA (5GHz) > TC Drive (Internal) = 22 Mbps
It seems that transferring files to a USB drive or the internal drive on the Time Capsule is painfully slow. It took 2:20 to transfer the 650MB file to the Time Capsule over GigE vs. 0:20 seconds to another machine. What's worse, is that the data transfer speeds to the TC are a function of link speed, the slower your connection, the slower your transfer rates. It's not simply limited by some bottle-neck in the TC. It took 3:45 to transfer the same file to the TC from the MacBook Air over the 5GHz WiFi connection. When I complained about this the other day at the Apple store, the "Genius" said that it's due to QOS built into the router to ensure it doesn't kill my web browsing.
I am doing an initial back up for Time Machine. I've got 56Gigs worth of data to back up from my 2Ghz Uni Body MacBook (with 4gig of Ram & running OS 10.5.7). I have a newly purchased Airport Extreme base station to which is connected to a Western Digital 1 Gig External HD. I am getting a transfer rate of about 1 gig per hour. Is it really this slow? I am using a 5Ghz network to reduce interference and they are very close to each other.
I tried connecting the WD drive to the MB. After I switched off Virus Barrier V5 and stopped Spotlight indexing it was quite fast. However there didn't seem a way of tricking this backup to think it was done via Airport Extreme. How could this be done?
It looks like my MB is going to have to be left on and stay at home for the next couple of days!
I was wondering if there was any improvements choosing an Express Card to eSata over using Firewire 800?
This card states a transfer rate on the card up to 300 mbps which is nowhere near the 800 mbps that Fw800 will give?
Each time I want to transfer any data from my laptop to an external hard drive disc, I can't do it, I just move the file to the destination but it don't accept it, it show me the sign "forbidden".
Info:
MacBook Pro, Mac OS X (10.7.2)
Not sure what I did to cause this, but all of sudden the front side USB ports have reduced transfer rates.
What can cause this issue all of sudden?
I just installed a new Hitachi E7K1000 1GB HD into my Powermac G5. I then found out my Powermac only uses drives at the 1.5GB transfer speed rate... i checked the specs for the hitachi drive at OWC and it says it is 3.0GB, not a 1.5/3.0GB hybrid. Could this cause trouble? The drive seems to be working fine so far... but does this mean this hitachi drive is not compatible with my mac?
View 2 Replies View RelatedI am deciding to buy a TimeCapsule within next week because my Seagate FreeAgent 500 Gb is already full. But I still not sure about its functionality and warranty coverage.1. How about the file transfer rate in wireless mode(802.11n)?2. Can I use the USB port of TimeCapsule with my old Seagate FreeAgent to expand the capacity?3. Is there any way to install a bittorrent software on TimeCapsule? like Asus WL-500W4. Is it fully support Windows XP?5. Can I use it as a repeater? Is this an option provided in Airport utility?6. I have just purchased an AppleCare for my MACBook pro but I am not sure about it coverage.
View 1 Replies View RelatedI am trying to use a WD Elements external HD formatted to Mac OS Extended, and the box says that the HD should have a USB 2.0 adapter, meaning it should transfer over 400 MB/s. Unfortunately for me, I've had many problems with this HD and it is now crawling at around 2.5MB/s, slower than 1.1 speeds. At the moment, it is at 750MB/93.51GB - About 21 hours. This is unexceptable, and I make HD videos, which are usually from 200 - 500 MB, and this would take AGES! I had no problems on my PC with this drive. Please help me! Should I format it to something else, get a new one, or something else? Please leave your suggestions below. Also, if you have an HD that works well, please leave it below,
P.S. All ports are free, except for the one with the HD in it. All that I have hooked up to my Late-2009 21.5" iMac is my wireless Apple keyboard, and my Magic Mouse. Nothing else hooked up to the computer AT ALL!
How can I find out what my transfer rate is for ethernet and wireless. I switched over to Time Capsule and all N network?
Also, how can you tell if you have the gigabyte cable or the regular cat 5 cable?
Has anyone come across any Firewire memory keys? (Similar to the USB Keys we have now days). Firewire has a much higher transfer rate than USB 2.0, so I was wondering if any company made the firewire memory keys. I did a quick google search but didn't come up with anything recent. All the articles I read were from years ago.
View 4 Replies View RelatedI am wondering why my MBP takes about 7-8 mins to copy 700 mb files from the external (Seagate FreeAgent pro 500 Gb) and of course, it takes about 1 hour to copy 7 Gb files.
However, this problem has occurred only copying file from external to my MBP, the transfer rate is fine when copying files from MBP to external
Note : I've already repair the disk by using disk utilities, but it doesn't help me at all.
i just got a new macbook pro 13" laptop and am trying to transfer my itunes music as well as some data i have compiled into a single folder from my (2005) Powerbook G4 12" laptop. Please help me out with this i have no idea how to do this and the Apple Store said they will do it for $100 and i just poured every penny i own into this computer and cannot sell me old computer to pay bills until i transfer this data.
View 5 Replies View RelatedIs it possible to transfer a windows vista license to an iMac from a PC when using parallels? I will no longer be using the PC and would like not to have to buy a new windows license.
Info:
iMac
I have a 2010 13" MacBook Pro. I bought a FW800 enclosure for my 500GB Seagate 5400rpm HD. In OSX using Path Finder to test transfer speeds I get around 40MB/s. Pretty good. Not as fast as it should be given the drive and FW800's possible speeds, but acceptable. When I switch over to my boot camp partition with Vista Ultimate installed I get 4MB/s. I can't figure out why I'm getting such slower speeds with Vista. I did the tests using the exact same files. So what am I missing? How can I get the transfer speeds I should be getting in Vista?
View 9 Replies View RelatedI am writing about my experiences making the switch to Mac whilst at the same time reviewing the Mac Pro 09 Quad 2.66 [URL] I have a couple of early problems which are described in a little more detail in the blog, but they are essentially this: 1. Is it possible to have both Vista and OSX on seperate (via bootcamp) partitions of the same disk? I am pretty sure it is, but Disk Utility is being very flakey in that its failing to create the second partition 2. Anyone have much experience getting standalone MTS files imported into iMovie 09? Probably the wrong forum to ask this question so ignore if you want But my brief research seems to suggest this is down to them being standalone mts files without the rest of the AVCHD directory structure that is present on the camera's hard disk
View 14 Replies View RelatedOne of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedYesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
I'm trying to copy from my Vista hard drive to my Mac hard drive. I'm getting rid of the Vista machine.
I took out the hard drive from the Vista and put it in an external enclosure that is USB attached to my Mac. The Mac is unable to read the drive.
I thought that leopard was able to read NTFS file systems?
It acts as if it doesn't even understand the partition table format on the drive.
Is there a simple way to get this to work? Does NTFS-3G help reading the partition table?
Anyone with knowledge about what requirements a Vista install DVD/CD needs to meet to start an installation of Vista on a MacBook? I think I once heard you need a genuine Vista Install disk but that would prevent you from using Windows Vista Lite versions wouldn't it? Genuine windows vista takes up a lot of resources so there are good reasons to target Lite versions I guess.
View 2 Replies View RelatedI recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
View 2 Replies View RelatedI have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk.where I can get a Windows Vista install disk?
Info:
iMac, Mac OS X (10.7.3)
I've followed the Bootcamp procedure correctly, but when I load my Vista Ultimate disk all I get is a blank screen. I've left it for a while, but even after half an hour still nothing.
What could the problem be, any tips?
It is a MacBook and 32 bit Vista if that if of use.
in an effort to load windows vista into my machine I partitioned my harddrive and put the windows installer into my machine. When I didn't have enough space to load (partitioned 5gbs, needed 6.9 or something) I was unable to remove the disk from the drive for 30 minutes! I looked up these types of forums and couldn't find a solution.
View 1 Replies View RelatedI just started to use about mba 2 months ago I purchased an imac today and i wanna transfer my data on mba to my new imac. how can i do that? I got time capsule.
View 11 Replies View RelatedHe needs to transfer the data from the old desktop to the new laptop. Does Windows have something like the beloved Migration Assistant of Leopard? What is the easiest way to transfer between the two?
View 6 Replies View RelatedThis Friday I am going to treat myself to a new MBP with the arrival of Snow Leopard. Are there any tips or pitfalls to be aware of when transferring data from old MB to new MBP? I plan on using Migration Assistant with firewire. SEEMS pretty straight forward. Need to transfer all applications and data. I still haven't entirely shaken my Windows past, so I am a bit nervous. Also, after the transfer is complete, what is the best/most secure way to wipe out the MB HD, reinstall OSX 10.5, and prepare for an ebay sale?
View 3 Replies View RelatedLike many, very recently I took the plunge: 27" iMac / Quad Core / i7 / 1TB HDD / 8GB RAM and I couldn't be happier! What is the best solution for transferring data from an old hard drive (formally inside a PowerMac G5) to the brand new iMac? My first attempt was with the 'Akasa Integral HDD External Enclosure' however this doesn't appear compatible with the file structure of Tiger, let alone Snow Leopard. The PowerMac G5 tower itself has a failed power supply, so connecting from Mac to Mac isn't an option either.
View 2 Replies View RelatedI have a unibody macbook model 5,1. I currently have it dual booted with windows-xp so I can play games(upgrading to 7 soon), and I want more harddrive space. I am debating between buying a new internal and simply upgrading or just getting external. Does anyone know if running games off of an external decreases performance? I was also wondering how hard it is to install a new harddrive and transfer all the data from the old one, also how do you transfer the data between harddrives?
View 1 Replies View Related