OS X :: Can't Get To The Mac Boot Menu

Nov 18, 2009

well at my school I was given the "privilege" to be a Linux beta tester. I chose Macpup, because it is small, works on the old computers, and looks like a mac. I wanted to try it on my Mac, but I can't get to the boot menu. I've tried holding C, +OPT+SHIFT+DELETE, but whatever I do, it doesn't work. No, twice it got there, but it was just showing a tiny folder with the mac finder logo and a question mark flicking back and forth for a few minutes, then booted mac.

View 1 Replies


ADVERTISEMENT

OS X :: Invisible Menu Bar At Boot

Jan 23, 2010

After upgrading to Snow Leopard, once in a while my menu bar doesn't show up after booting! See screenshot below. It's not a serious problem, since clicking once or twice suddenly brings it back to the visible world. But I'm very curious why this would happen. I have been running a clean install of SL on my aluminum macbook. This never happened with Leopard.

View 1 Replies View Related

OS X :: Access Boot Menu On Non - Intel Mac?

Oct 1, 2009

how do i access the boot menu on a non-intel mac? i thought it was option and D but that doesn't seem to work.

View 3 Replies View Related

OS X :: Unable To Access Boot Menu With USB HDD

Jun 29, 2010

how to create a bootable backup of my Macintosh HD on a LaCie 500GB USB external HDD which is 2-3 years old. I formatted the drive with a GUID partition table scheme, with the volume formatted as Mac OS Extended (Journaled), which I believe is the correct setup.

However, when I try to boot from the external HDD by holding down Option key during startup, I do not get the boot menu, instead the computer freezes at a blank grey screen and doesn't boot anything. If I remove the USB drive and do the same, the boot menu appears with Macintosh HD as the only choice (as would be expected).

View 10 Replies View Related

Windows On Mac :: Always Show Boot Menu When Turn On

Nov 22, 2010

i want to know if there is an option or a hack that when i turn on my imac it will always show boot menu then i can choose mac or windows. Without always having to hold down the option key?

View 13 Replies View Related

Windows On Mac :: Rename Windows Volume In Boot Camp Startup Menu?

Nov 12, 2009

This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.

Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??

View 4 Replies View Related

Windows On Mac :: Boot Camp Menu Bar Icon - Restart In Windows?

Sep 19, 2007

On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?

View 20 Replies View Related

MacBook Pro :: Suddenly All Of The Wireless Signals Disappear From AirPort Menu Up On Menu Bar

Dec 27, 2009

I've realized that sometimes I "lose" my wireless signal. I am not using an AirPort router (I'm using Linksys, if that's at all helpful). I've noticed that suddenly all of the wireless signals disappear from the AirPort menu up on the menu bar, except the network that I am connected to (i.e., I only see my router's name there). It also becomes impossible for me to browse the internet, so what I've done to troubleshoot this is disable the AirPort, put the computer to sleep, and disconnect/reconnect my router. When I turn it on, it seems to work. I've also tried simply disabling and then re-enabling AirPort, but it doesn't work after that.

View 2 Replies View Related

OS X :: Missing Services Menu From Finder / Service Says Its Building Menu

Sep 18, 2010

my "services" menu has disappeared as an option in finder. When I try to access it by right-clicking a finder item (folder or file), it's just plain missing. However if I look for it under the finder menu bar, the arrow beside service says 'building'. But I've been waiting for hours and it doesn't look like anything's happening.

View 1 Replies View Related

OS X :: Touching IChat Menu Bar Icon Resets Menu Bar?

Oct 16, 2009

Just today it began that when I try and open iChat from the Menu Bar icon, the whole right side of the menu bar reboots. Anyone else experienced this or have an idea of steps I can take to fix it?

View 1 Replies View Related

OS X :: Menu Navigation - Access Menu From Keyboard By Using Ctrl + F2 Key

Dec 16, 2010

I recently bought myself a Macbook Pro 13-inch model and I've been loving it so far. One thing that really bugs me is how bad the menu navigation is in OS X. I just read this on Macrumors and the only way to access menu from keyboard is by using ctrl+F2 key for which I have to press ctrl+fn+f2 key since F2 is a secondary function. Also, there is no way of going directly to the middle of the menu by keyboard shortcuts, right? If that is true, Mac OS X is still not polished enough for laptops. is there are a better way to control the menu items?

View 4 Replies View Related

Safari :: Menu Bar Is Missing - The Menu Bar For Desktop?

May 10, 2012

My safari menu bar is missing.  The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc.  I think my husband (pc user) clicked it away when borrowing my computer. 

Info:
MacBook
Pro, Mac OS X (10.5.8)

View 14 Replies View Related

OS X :: Moving The Menu Toolbars Up To The Menu Bar?

Sep 18, 2010

I run Windows-only programs on my Mac via Wine and I was wondering if there is a way to move the menu toolbar of the windows up to the menu bar to make it somewhat more Mac-looking.

View 2 Replies View Related

OS X :: My Apple Menu Is Not Opening Up In My Menu Bar?

Sep 30, 2010

So i know this is gonna be a challenging one...

After a day of installing and trying/deleting new apps as well as trying terminal tricks from UsingMac.com like these and these, i went up to my apple menu in the menu bar for the first time since i started fiddling around, and it looks like what you see below in the attachment. I have absolutely no idea what made it happen; I'm just wondering if there is a way to reset the menu alone. because instead of having just what it says in the "system services" section in the menu, it has all that other stuff as well (Calculator, FruitMenu, etc.).

P.S.: Fruitmenu isn't even installed. i uninstalled it after i found out it was only a demo.

So basically:
1) how do i restore the main menu in the menu bar back to its original settings?
and 2) I need to do it in a way that wont screw up the rest of my computer or settings

View 6 Replies View Related

Mac Pro :: Unable To Boot / Kernel Panic At Boot And Graphics Card Failure

Mar 9, 2008

Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.

So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.

What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.

View 21 Replies View Related

IMac :: 27" Wont's Boot Up / Takes A Very Long Time To Boot?

May 15, 2010

I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM

In the second week the boot up times became very slow.

I would turn the machine on and get the chime within 5 seconds or so.

Then just a black/blank screen.

Eventually after about 10mins I would get a white screen then it would boot up normally.

Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).

I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.

I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.

But now when I switch it on just darkness.

I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.

View 3 Replies View Related

OS X V10.7 Lion :: Apple Macbook Boot It From Usb Or Firewire External HDD Or Usb Stick, Which Of 3 Better Must Boot

Mar 25, 2012

MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?

View 14 Replies View Related

MacBook :: It Won't Boot After Trying To Repair With Disk Utility, Cannot Boot In Safe Mode

Jun 11, 2012

I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.  

I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc". 

I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy. 

Info:
MacBook, Mac OS X (10.5.6)

View 3 Replies View Related

Intel Mac :: Boot Partition Error Message - Mid 2010 I7 Will Not Boot Past The Apple Logo

Apr 8, 2012

My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok.  

Info:
iMac, Mac OS X (10.7.3)

View 7 Replies View Related

Power Mac G5 :: Cannot Boot From DVDs - Defaults To External FW Boot Drive With 10.3.x

Dec 20, 2007

This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.

Information:
G5 Dual 2GHz
Mac OS X (10.4.3)

View 4 Replies View Related

MacBook Pro :: Boot From External Firewire DVD / Optibay-Boot Camp?

Oct 13, 2010

Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...

Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.

Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...

View 8 Replies View Related

PowerPC :: IBook G4 Won't Boot Past Apple Screen & No CD Boot

Jun 11, 2007

I have an iBook G4 1.07 GHz 30 gb 256 RAM with Panther. It was working fine until my HD got close to being full. Now I can't get it to boot past the Apple screen. It will either freeze there, or move on to the blue screen and freeze before the progress bar enters. I want to re-install Panther but I can't get any CD to boot during startup by holding "C", including the Panther OS CD, the Hardware Test CD, or the Tech Tool CD. I am able to boot to single user mode, where I type fsck -fy, and I recieve no errors with the hardware. I had this issue beore and my HD had to be replaced by Apple.

View 6 Replies View Related

OS X :: Slow Boot After Installing Windows Vista Using Boot Camp ?

Dec 25, 2008

This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .

I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .

Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.

And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .

So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.

And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )

View 4 Replies View Related

OS X :: How To Make Boot Camp OS Selection Default Boot Screen?

Sep 17, 2009

Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.

I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.

View 1 Replies View Related

Mac Pro :: Mac Pro Won't Boot / Kernel Panic At Boot Graphics Card Failure?

Oct 2, 2009

Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.

So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.

What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives.

P.S. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.

View 7 Replies View Related

Software :: PowerBook Refuses To Boot And Ignores Boot Keys?

Sep 13, 2009

I have OSX installed on a very old Powerbook. Well it was working and then I left it for awhile and now it is giving me the good old folder to question mark screen (maybe someone dropped it?). Well I'm not much of a mac user so I looked up all of the different boot key commands and tried to boot from my OSX CD. Holding down C did nothing, and neither did ANY of the other commands except holding down option and that key command that restarts the computer (apple, option, shift, esc?). Anyway, I got into the screen that shows your hard drive and all other devices and it actually listed the CD drive so I clicked it and clicked the next arrow. I waited for awhile and then the screen reloaded (as if it was rescanning for removable devices) and then stopped and only displayed the local disk. What is going on?! It only sometimes displays the CD in this screen and the next arrow never does anything regardless!!

I really don't know any of the computers stats but if I were to guess they're pretty bad. All I know is it used to run OSX just fine and then other people used it and now it doesn't do anything.

View 7 Replies View Related

OS X V10.7 Lion :: 10.7 Won't Boot Unless Hold Option Key And Select Boot Drive

Apr 27, 2012

Last week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly.  It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there.   However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore?  Holding down the Option key is getting old. 

Info:
Mac Pro - Octo Core, Mac OS X (10.5.6)

View 5 Replies View Related

OS X :: Does Boot Camp 3.0 Support A Triple Boot System?

Sep 21, 2009

I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.

Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.

Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp

View 1 Replies View Related

Mac Pro :: Best Setup For Dedicated Boot Drive? - Possible To Boot From RAID 0?

Jan 25, 2009

I decided that I couldn't wait for Gainestown and ordered a 2.8x8 MP today. I'm going to get another 8GB of RAM (I assume 10GB in matched pairs will still perform at full speed). My real dilemma is a Boot/Storage solution-I'm moving from a Dual 867 G4, so all my current drives, both internal and external are IDE, which basically means I'm starting over as far as internal drives goes. The G4 power supply gave out so I'm getting this external enclosure to put my old drives into for file recovery. As far as new drives go, I can't figure out what to do. I'll spare you my million iterations of drive configs I've sketched over the past two days.

View 14 Replies View Related

Windows On Mac :: Can't Install 7 On Boot Camp - Press Any Key To Boot From Cd

Feb 18, 2010

I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."

When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)

What I've Tried:

Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.

View 15 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved