MacBook Pro :: 15 Inch Can't Switch Off (freeze At Blue Screen With Spinning Wheel)?
Feb 12, 2012
Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem? I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem? Currently i can only switch off my MBP by holding the power button (forcing it to shut down).
Info:
MacBook
Pro, Mac OS X (10.6.8), 15 inch 2.0 GHZ
it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5.
When I turn my MacBook on it does the white screen with the spinning wheel and then goes to the blue screen but it gets stuck on that screen for about a minute or two and goes to my login in screen any idea whats going on with it i have not changed anything but the other day I was turning it on and there was a bug on the keyboard and I went to kill it causing my to press some random buttons during the start up and its been doing this ever since.
My early Intel iMac (2006) won't shut down - gray spinning wheel and blue screen for more than 2 hours now. Can I safely turn it off with the power button? (I'm a little paranoid after a bad experience doing that with my MacBook Pro).what I should I do then?
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
I upgraded to Snow Leopard and a few days later when i went to shutdown my mac pro after i woke it up, i got the blue screen and progress wheel just spinning. After calls with Apple, running both long and short hardware tests, 3 snow leopard discs, a clean install, 2 upgrades, the tech gave up. The clean install was a bare bones install with no applications installed. I would now have to take it into a repair shop and pay for software tests. This is a one year old mac pro with apple care. I used Time Machine to restore to leopard, and all is ok. Has anyone heard of this problem? I'm quit happy to stick with Leopard, but am upset that an apple software problem has to be fixed and paid for by me. I assume if it was a hardware problem it would show up in Leopard.
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?
I bought my first uMbp the day Snow Leopard came out. Unfortunately, it was not installed on the uMbp. So upon running the mbp for the first time, I proceeded to install SL.
Now occasionally, maybe a once every other day, whenever I open up a few applications like Word or maybe even a new tab in Firefox, everything would freeze and the spinning color wheel would spin for about 30 or so seconds and everything would resume to normal.
Now I ask, is this normal behavior? I have the 2.26ghz uMBP edition with 2gb of ram.
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
The colorful spinning wheel has been stuck on the screen for 2 days now. I can move the cursor around but the wheel never goes away.....I don't know what to do
A few months ago my 2004 iMac froze as I was simply shutting down the power and attempting to restart. I was not installing any new O/S.Today I attempted two things while booting with the O/S recovery disc-1: (a) I slid the disc in and held down the "C" key while I attempted to power it on. Nothing happened and I continued to see the grey screen and spinning wheel.
(b) I slid the disc inside and held down the "ALT" key while I attempted to power it on. Three icons showed up: (a) Hard Disk; (b) Recovery Disc; and (c) Test. I clicked on the Test icon and it took me to a new screen with two options: ( i ) Quick Test and ( ii ) Extended Test. I clicked on Quick Test. The first aspect of the Quick Test (I think it was Airport) went through fine and passed. The second aspect of the Quick Test (Logic Board testing) continued to show "In Progress" for a really long time (about 15 mins.). From that I figured something must have gone wrong with the Logic Board.
I rebooted my MacBook Pro (15", i7). When the system started back up, I got a status bar at the bottom of the screen. It took approx two minutes for the status bar to move to completion (almost like it was performing a BIOS update). I then got the gray spinning wheel (gray backdrop, darker gray Apple logo). I tried holding down the CMD and Option keys during a subsequent reboot....nothing changes.
I apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
I was away at a friend's yesterday and left my computer on and downloading a torrent (I have done this before and everything has been fine). When I came back today, I noticed that my computer was working very slowly so I restarted it. However, it would just stay at the grey screen with the wheel spinning forever instead of moving on to the blue screen.
I know that this has been reported many times before, even on this forum, but everything I tried does not work. I tried:
Holding down Command+S at startup and entering the command fsck -fy. Did not fix the problem Opening the Install Disc and going into Disk Utility. I repaired the permissions and verified that the HD has no problems but the problem persisted.
Going into Safe Mode. This actually works fine, but unfortunately offers an extremely limited functionality of my computer.
I think my hd went out. I have a G4 dual 1ghz (pretty sure, can't see it right now) mdd, os 10.411, and it froze up so I did a hard restart: hold the power button for 10 seconds till it shuts off. When I turned it on the next time it would not boot up. Gray screen withe the spinning wheel of bars like it is thinking, searching, and longing to start up. Booted from the install cd to access the hd, but it acts like it wants to install the os fresh.
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?
My iMac G5 (running 10.4.11) freezes at the blue screen, after recognizing the mouse, but before the login window. Some form of energy saver must be working because after the blue screen dims, moving the mouse will brighten it.
Steps I've taken: Hardware test - everything passed (RAM, logic board, airport, display, etc...) Zeroed the computer (7 times) and fresh reinstall
I CAN boot up in Safe Mode, Single User Mode, and Verbose mode. I can boot from CD, Knoppix CD, and into Target Disk mode (thank god for this MacBook I'm on now...)
Here's the system log (I've edited in comments and out personal info):
// reboot and power on
[SIZE="2"][FONT="Tahoma"]Jan 6 21:19:02 users-imac-g5 shutdown: reboot by user: Jan 6 21:19:02 users-imac-g5 SystemStarter[102]: authentication service (110) did not complete successfully
// gray apple screen with spinning progress bar
Jan 6 21:19:35 localhost kernel[0]: standard timeslicing quantum is 10000 us Jan 6 21:19:35 localhost kernel[0]: vm_page_bootstrap: 124630 free pages Jan 6 21:19:35 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[38]: starting Jan 6 21:19:35 localhost kernel[0]: mig_table_max_displ = 70 Jan 6 21:19:35 localhost kernel[0]: 89 prelinked modules Jan 6 21:19:35 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993 Jan 6 21:19:35 localhost DirectoryService[36]: Launched version 1.8 (v346) Jan 6 21:19:35 localhost kernel[0]: The Regents of the University of California. All rights reserved.
macbook pro blue screen with spinning disk, won't start up. my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED. then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin.
After having inserted a dvd borrowed from the library which my Imac had a really tough time reading, I turned off my Imac as usual. Since then when I turn my mac on the fan starts roaring and i don't get beyond the first white screen with the sort of clocked wheel just going round and round. I don't have a clue to what to do.
I have a very old IMac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago. Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel. I tried many times off-on, hold down the apple function key but none worked. I no longer have the rebooting CD with me. I wonder whether the computer can still be saved? I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files. I think it's tiger or earlier that it's using.
