OS X :: Wired Apple Mouse - Best Speed Setting For It?
Apr 18, 2010
I've purchased a Mac mini with the Apple mouse (Mighty mouse) and Apple keyboard and I can tell a difference between how tracking speeds on Mac's compared to PC's, in that with a Mac the tracking speed is less linear and slower if the mouse is moved slower and accelerated if the mouse is moved faster. I'm starting to adjust to this change but can you guys tell me what mouse speeds you have set for your mighty mouse and what screen size you have. Just want to see what speeds other people are using on their Mac's.
View 2 Replies
ADVERTISEMENT
Jun 14, 2009
So I got a new Macbook about 3 months, and I've been sitting on a couch in the same room with the wireless router. However I'm getting a bit sick of having to use a couch as my desk and I want to get internet in my room.
Our house, is reasonbly new, and I know that all the phone wires are cat5 (I'm 100% sure), so I was thinking of setting up a wired network.
Since our house is made up of concrete and steel beams, the wireless signal isn't that great in our house. We have a D-Link G604T which is a piece of junk so I will get a new router in the near future.
So currently, we have some sort of filter in the room where the router is, so we can plug in the router without having to worry about putting filters on all of our telephone lines.
However, if I were to put internet in through the same line, I'm guessing I would have to get some filters.
Hopefully what I want to do is get a phone jack to Ethernet converter and put internet directly into the wall and hopefully I will get internet in all of the phone jacks. I could probably take the cable out and put a Ethernet end straight on the cable.
I was also thinking If I get a airport extreme of some other gigabit router, I would technically get less latency and would retain my internet speeds even though I would getting internet through a long line of cables.
View 1 Replies
View Related
Dec 15, 2009
Looking for an alternate wired mouse to the Mighty Mouse thats works flawlessly on a Mac Pro under Snow Leopard.Also an answer from somebody on this who does not get any kernel panics would be good. I ask this because I haveread of somebody who was using a MS mouse which should have worked on a Mac Pro but turned out that the softwareprovided with said MS mouse was calling bad Kernel Extensions and was therefore causing Panics.
View 3 Replies
View Related
Jul 28, 2010
I'll try to keep my post short somewhat: I've acquired what appeared to be my most useless piece of equipment: the bluetooth mighty mouse. I am not against wireless stuff per se, I love the keyboard. But the mouse has these annoying problems:
1. Batteries wear out way too fast.
2. Trackball clogs way too easily.
Now I can do without scrolling down, and might clean the thing one day from the insides, but what annoys me is the battery life. And having to buy batteries every other week. A simple workaround would be to buy a cheap wired mouse. But for the sake of thinking about a project, has anyone with some background in electronics tried, or tried to think of the possibility, of modding a mighty mouse and enable it to get some juice through USB?.......................
View 3 Replies
View Related
Feb 8, 2012
My mouse is set to scroll horizontaly and vertically but it will only scroll up on a page, not down. Is there any way I could fix this so my mouse can scroll down as well?
Info:
iPhone 4
View 2 Replies
View Related
Jul 4, 2012
I have tried the following
- Resetting the pmc.
- Rebooting / shutting down, swapping USB ports.
- Verify HD permissions
- Disabling bluetooth (even tho this is wired usb mouse I've seen people mention this so just before you do!)
- Plugged the mouse into a Windows 7 Machine (sorry its not mine! :-) and YES it works fine!
Also there are no drivers for this 'Imation' wired usb mouse as its plug and play and on the box its states fully supports mac os 10.x brand new.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Mar 30, 2009
I just purchased a wired Mighty Mouse but the cable is very short. What extender would work with this mouse?
View 5 Replies
View Related
Apr 11, 2010
I've had my imac for over a year and a half now with no troubles. But, the last couple of weeks my wireless keyboard has not been working. A message pops up saying that the connection has been lost. Then, the wired mouse moves around....but won't select or highlight anything...the 'click' doesn't work. Then all of a sudden everything goes back to normal.
View 2 Replies
View Related
Jun 11, 2009
I'm using a Logitech MX 518 mouse. It was working fine with the exception of the two side buttons; they weren't set up the way I liked and the mouse control panel did not let me change them. I installed some Logitech drivers (lcc213) that were supposed to support the mouse; upon reinstalling the mouse was not recognized by the Logitech software. The scroll wheel became very sluggish (maybe scrolling one line, and seemingly no acceleration). I removed the Logitech software and restarted, but now my mouse is stuck that way - moving the scroll speed in the Mouse preferences all the way to the left or all the way to the right makes no difference.
Is there any way to reset the mouse drivers or whatever might be messed up, short of a reinstall?
I even tried to use USB Overdrive and that likewise has no effect on the scroll speed.
View 1 Replies
View Related
Feb 7, 2010
A friend gave me a wired version of the Apple Mighty Mouse. I use my right hand whenever i'm using a mouse but the cable is way to short to wrap around to the right side of my 13inch MBP.
Anyone in this similar predictcament before? did you learn to use it with your left hand or something?
View 1 Replies
View Related
Jan 2, 2011
I recently purchased a refurbished 24 inch imac from the noticed when the computer is idle (black screen), my wired mouse does not work. When I pull the cable out of the usb port on the imac, the computer screen comes on and then I reinsert the cable back into the usb port in the computer to use the wired mouse (wired mouse works fine after I reinsert the cable back into the usb port).Could this problem be associated with the wired mouse or with the usb ports on the imac?
View 2 Replies
View Related
Feb 18, 2009
I have a MediaSmart Server due on Friday. I have an iMac, MBP, MB, and two PC's using an Apple Airport, how should I connect the MediaSmart Server EX485 to my airport, wired or wireless? Is there a performance difference between the two setups?
If wired offers best speed then I can easily do that as they will be near each other.
View 9 Replies
View Related
May 21, 2009
Now i use the macbook with XP
i got the new apple non numpad wired keyboard today i found i can't use Fn + <- for Home Key like my macbook.
i must config something before use ? how i can config it?
View 2 Replies
View Related
Sep 1, 2009
I want to get the apple wired keyboard (not the wireless), but I'm undecided on which version. Is the shorter wired version a lot more cramped than the longer one, in respect to the majorily used keys, or is the spacing the same between the characters for both keyboards. I never use a num pad normally and would like to free up a little space on my desk, but I'm worried that the rest of the keys will be more cramped and uncomfortable to type on.
View 3 Replies
View Related
Sep 9, 2009
Im attempting to extend the wireless network within a clients house and have the following scenario. BT Home Hubv2 downstairs offering wireless connection and internet .CAT5 cable laid from downstairs up to the loft where i now have an Apple Time Capsule
Id now like to extend the BT Wireless Network using the Apple Time Capsule so all users can roam on the same wireless network without having to join a new one?
Can anyone advise on whether this is possible and if so how? Ive found this site which talks about wiring a BT Home Hub v2 with a Home Hub v1 and was going to follow the same procedure?
View 1 Replies
View Related
Jan 31, 2012
A number of times now my Apple brand Wired Keyboard has droped out of control. The letter keys work fine, but things like enter, return, the volume keys and more everything in that line will not operate. OF course, then waking it up from sleep becomes a problem and to get that back or any of the usual control I need to restart.
View 6 Replies
View Related
May 29, 2012
I have a Macpro 1.1 running Lion 10.7.4 and I the apple wired keyboard with numeric keypad that isn't working. I am looking for the updated drivers to reinstall.
Info:Mac Pro, Mac OS X (10.7.4)
View 11 Replies
View Related
Jul 29, 2008
During the summer, I don't have A/C in my house. My temps were getting pretty high, around 55C/130F for processors and up to 78c/172f for ram. That is pretty high, and I suspect it is because the ambient temp in my room is somewhere in the 90s. I am just very acclimated to the heat, and it doesn't bother me.
I downloaded SMC Fan control and bumped the min fan speeds up to:
1250rpm for Exhaust
1150rpm for CPU
800rpm for Power Supply
1350rpm for HD
This has made a tremendous difference. CPU is down over 20C and ram is down about 30-35C. Are these fan speeds safe? What are the Mac Pro fans rated at, and will the increased speed shorten their lifespan? I'd like to keep these current fan speeds if it is safe.
View 7 Replies
View Related
Apr 14, 2009
Just downloaded and installed this app, been using it for a few hours, I am a fan. Just a quick question, it won't seem to let me set the minimum fan speed below 2000rpm (the standard level for the app), is this normal, I thought I remembered the apple default being lower?
15inch UNI MBP, 2.4 ghz, 2g ram, 250hd by the way
View 4 Replies
View Related
Jul 31, 2010
Does anyone have any idea / images of how the magic trackpad sits next to the Wired keyboard from Apple. It looks by the images that the wireless keyboard is slightly more angled than the wired version. Just wondered if anyone has any pictures of how the trackpad sits next to the wired keyboard?
View 19 Replies
View Related
Mar 13, 2012
Whilst working on my iMac as per normal, I get this little window that pops up declaring that a USB decice is drawing too much power from my computer and as as a result, one or more of my USB devices has been disabled.
This is not an alien dialogue box to me, I have seen it many times. The problem this time is that, when I removed all my devices to see which one was causing the message to pop up, I discovered that it was my keyboard that was misbehaving.
When the message pops up it states that the offending device has been disabled. This cannot be the case however, as I am able to press enter to close it, and if the keyboard truly is the problem then I shouldn't be able to close it with enter because it would have been disabled... right?
Wondering if anyone else has had this problem. My keyboard is the standard wired + number pad one shipped free with new iMacs. It's not a custom one, it's apple stock through and through.
The baffling thing is that this has only just occured. In the year or two since I bought my iMac it's never been a problem.
Yes I have tried using a different USB slot, and no that doesn't fix it.
This box keeps popping up unless I disconnect my keyboard which of course is no way to use the computer, and I don't have a spare keyboard handy.
Info:
iMac, Mac OS X (10.6.7)
View 2 Replies
View Related
Aug 10, 2010
I've just got a MBP 13. I was able to set the speed at which the applications open, so rather than the little icon in the dock bouncing 3 or 4 times it bounces twice then opens. I cannot find where I did this. Also is it ok to set it to the fastest if you like?
View 3 Replies
View Related
Sep 10, 2010
Any advice/links re how to open up the Apple Wired Keyboard with Numeric Keypad? Spilt some coffee and some of the keys aren't working properly. Link to the Keyboard I'm Talking About
View 13 Replies
View Related
Oct 2, 2010
I'm having friends stay with me for a few weeks and want to set up the AE to limit the speed of internet available so they don't stream video all day (I have a data cap)
View 2 Replies
View Related
May 6, 2012
I have 3 macbookpros connected to a mini mac server via ethernet. I have the cables and hub to set up a firewire network. I'm wondering if having two networks will increase my connection speed?
Info:
MacBook
Pro, Mac OS X (10.7.3), Server
View 4 Replies
View Related
Dec 14, 2010
So I just bought a Magic Mouse today and am a bit torn between keeping it or returning it. The deciding factor is ultimately the most important one - tracking quality. Acceleration works fine for my MBP trackpad, but in terms of mice it is absolutely unacceptable IMO. I am trying to find a way to strike a balance, and it seems the only way to do it is by disabling acceleration altogether. So far the only thing that has worked is the killacceleration script that someone here posted, but it is not perfect because you have to run it every time you restart/make any changes to tracking speed. Has anyone found a solution to this problem? I need to add that I depend on Better Touch Tool, so things like USB Overdrive that kill acceleration won't work for me, because they additionally overwrite any BTT gestures/settings
View 1 Replies
View Related
Mar 28, 2012
I'd like to be able to hook a mouse up to Macbook Air and have it scroll properly, without breaking the scroll direction on its trackpad (or my magic pad). In other words, I want to disable "Move content in the direction of finger movement when scrolling" for mice, and enable "Scroll direction: natural" for trackpads. These seem to be the same setting, though, as checking/unchecking one has the same effect on the other.
How can I do this, as I'd love to be able to easily switch to a mouse, without having to mentally reverse the direction of the scroll wheel.
Info:
MacBook Air, Mac OS X (10.7.3)
View 4 Replies
View Related
Nov 1, 2009
Open a Terminal Window and type the following: defaults write -g com.apple.mouse.scaling 5.0. "5.0" being the number designating the speed. Change that number to whatever you like. I've got my Magic Mouse set to 150 or so. This does not change the acceleration, just the scaling. Altering the setting via the preferences pane overrides the Terminal command. Log out and back in to activate. For a more complete solution, get USB Overdrive.
View 8 Replies
View Related
Nov 15, 2009
I just got magic mouse and I got it set up, but the touch gestures dont work. what might be the problem?
View 2 Replies
View Related
Mar 17, 2009
I just opened my brand new 2009 24inch IMac! The Mouse pointer speed is very very slow. I adjusted the tracking speed to the fastest possible, but this is still under par. I typed my question in google and it directed me to download a program called "Mouse Zoom" which was downloaded onto my... "Desktop." I didn't click the icon to run it because I am afraid of a virus. Is "Mouse Zoom" safe to click on? Will it fix the problem, or is there an alternative to this issue? I cant imagine something so nice being crippled by something as simple as mouse speed.
View 24 Replies
View Related
