Just downloaded and installed this app, been using it for a few hours, I am a fan. Just a quick question, it won't seem to let me set the minimum fan speed below 2000rpm (the standard level for the app), is this normal, I thought I remembered the apple default being lower?
15inch UNI MBP, 2.4 ghz, 2g ram, 250hd by the way
What's up with this in the newest version of SMC that just came out today? The min now goes below the original 2500 RPM that the Apple engineer's decided on??
View 12 Replies View RelatedDuring the summer, I don't have A/C in my house. My temps were getting pretty high, around 55C/130F for processors and up to 78c/172f for ram. That is pretty high, and I suspect it is because the ambient temp in my room is somewhere in the 90s. I am just very acclimated to the heat, and it doesn't bother me.
I downloaded SMC Fan control and bumped the min fan speeds up to:
1250rpm for Exhaust
1150rpm for CPU
800rpm for Power Supply
1350rpm for HD
This has made a tremendous difference. CPU is down over 20C and ram is down about 30-35C. Are these fan speeds safe? What are the Mac Pro fans rated at, and will the increased speed shorten their lifespan? I'd like to keep these current fan speeds if it is safe.
SMCFanControl lets me set a higher minimum fan speed on my MacBook Pro (I like to keep it at about 3600rpm instead of 2000rpm minimum). Is there a way to do this with the MacBook Air? SMCFanControl doesn't seem to detect the MacBook Air properly. Essentially I want it to run at around 3600rpm and increase to 6200rpm as needed. It should never be running lower than 3600rpm.
View 4 Replies View Relatedwhat is minimum internet speed required for viewing iTunes movies thru OSX 10.4.11 to a TV thru the apple TV device.? Is it viewed as streaming or from a hard disk in the apple TV device?
Info:
iMac, Mac OS X (10.4.11), from computer thru apple TV device
I've just got a MBP 13. I was able to set the speed at which the applications open, so rather than the little icon in the dock bouncing 3 or 4 times it bounces twice then opens. I cannot find where I did this. Also is it ok to set it to the fastest if you like?
View 3 Replies View RelatedDoes the base speed mean the minimum speed for the fans to run at? Or, is the speed the fans will run at all the time?
View 1 Replies View RelatedThe actual Base Speed that results is always 100 RPM higher than the Base Speed I set in Fan Control. Now, this isn't hard to workaround, but I'm wondering if anyone else is seeing such behavior.I like to keep the MB at around 1200 RPM when I am on battery power in the cafe. It saves a lot of power, and there is a negligible increase in temperature (on the order of 3-5 degrees F), and Fan Control has been great for that.
View 8 Replies View RelatedI have an iMac 9, 1 (the '09 model). 3.06 GHz DC. So I tweaked the fan speed a little to see how cool it can get, but, there's one tiny problem. I used "smcfancontrol_2_1", I can get the speeds up, but not down.
View 2 Replies View RelatedI'm setting up OS 10.5.6 to run on an Active Directory server, How can i setup each users dock?
View 1 Replies View Relatedi am new to mac and coming from linux. got my mac pro about 3 weeks ago and i am wondering if there is something similar to powernowd or cpufreqd under osx to control the cpu speed and voltage of the 8 core monster. i mean there must be some power saving features in osx for the macbook series i guess and i want to know if there is something similar for the pro series.i am not sure if i better asked this questions in the osx forum but its somehow mac pro related. so are there any power saving features cpu speed or vcore related for the desktop mac series in osx right now?or is it maybe not supported yet because the hardware is so new?
View 5 Replies View RelatedTrying to set up a parent control user for my 12yr old, Safari's set homepage options all grayed out, even when go into user as "STANDARD" instead of "parental control" and with all parental controls turned off.using latest OS and Safari?
Info:
MacBook Pro, Mac OS X (10.7.2)
When I run SMC my fans kick to 4000rpm and SMC shows that my default speed is 4000rpm, I cannot put it lower then 4000 only higher. I have tried uninstalling the program and reinstalling.
View 3 Replies View Relatedgot a problem, after i bought the new macbook pro 13'':
i noticed that the fan speed is always about 2000rpm... doesn't matter, whether the temperature is at 40�C or at 70�C or 80�C (my mbp doesn't get hotter)... always same rpm.
is that normal? additional info: i downloaded istat menus 3 which has the option to control the fan speed (i deactivated it... no changing... always 2000rpm). did istat crash the internal fan speed control?
I've got a 13" unibody MBP, 2.26 GHz Intel Core 2 Duo w/4 GB 1067 MHz DDR3 memory.
From a hardware standpoint, can I run FCP and not want to tear the room apart? I have an external monitor so that's not the issue...
I know that technically I could run the software, but would it be torturous? I'll be working with HD video.
Furthermore...best place ($$) to legitimately get a copy of the software? Also, if I need to upgrade my system what would you all reccomend? Again, money is obviously the issue here and I'm just starting to get my hands dirty with this aspect of production so I'm trying to ease into things.
I've purchased a Mac mini with the Apple mouse (Mighty mouse) and Apple keyboard and I can tell a difference between how tracking speeds on Mac's compared to PC's, in that with a Mac the tracking speed is less linear and slower if the mouse is moved slower and accelerated if the mouse is moved faster. I'm starting to adjust to this change but can you guys tell me what mouse speeds you have set for your mighty mouse and what screen size you have. Just want to see what speeds other people are using on their Mac's.
View 2 Replies View RelatedI installed (and subsequently uninstalled) two different fan control programs... Since then, my fan speed has increased somewhat dramatically. Instead of the normal 2000 rpm (approx), it now runs at 3500 to 4500 rpm with CPU temps between 55 & 65 deg. C. I'm wondering if one of the programs modified some fan setting and how I can restore the factory defaults. I'm on a Macbook Pro OSX 10.6.8 *additional note: I only have one fan running (left fan), which is why I downloaded the fan control programs in the first place... but the left fan was running at around 2000 rpm even though it was the only fan (until I installed those programs)
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm having friends stay with me for a few weeks and want to set up the AE to limit the speed of internet available so they don't stream video all day (I have a data cap)
View 2 Replies View RelatedI have 3 macbookpros connected to a mini mac server via ethernet. I have the cables and hub to set up a firewire network. I'm wondering if having two networks will increase my connection speed?
Info:
MacBook
Pro, Mac OS X (10.7.3), Server
I want to defragment my hard drive because it's two years old, and I create and delete VERY large files every day.
What is an application that can effectively do this with minimum risk?
I get this error on opening aperture 2:
So, How can I bypass this error?
(It will run on my PB G4 but it is too slow, This is my Hackintosh with GMA x4500mhd)
I'm looking to setup a public DNS Server on Mac OS X but there seems to be an access control list that only allows clients on the local network to be able to do DNS lookups. How can I remote this?
View 1 Replies View RelatedI'm using Data Rescue III on a USB powered hard drive with and it's taking a very long time with my iMac G5... It says 42,291 hours remaining (about 5 years) If I did it on my Mac Pro would it go faster, or is the recovery speed based on the hard drive speed?
View 4 Replies View RelatedI've got a real odd problem with safari 4. For some reason it is cutting my download speeds in about 1/2 from my server and many other places.
If I restart safari I will be able to download close to my 18 Mbps for a little bit but then it will just start to slow down and after about 30 minutes it will be down to about 6 - 8 Mbps.
I'm pretty sure this has been talked to death but I can't find the answer.
I'm looking for a bare minimum neoprene or otherwise sleeve for my 11.6 MBA.
No second pockets, no carry strap, It doesn't even need to close. I just want to slip it in and then put it in another bag that doesn't have a padded slot.
Ive got a friend that has a mac pro 2.66 quad core and it came stock with only 2gb of ram. He wants to order some today but is not sure how much to get. If getting it from OWC what would be the best bang for the buck? is there a point where more ram wont make that much difference?
oh and his has 4x512mb sticks, what are your opinions on not matching the sticks? (such as 1gb with 512mb)
With my new headphones (Sennheiser HD280-PRO) even the lowest volume is too high (even when using the extra levels using the option-key). It's just below the level where it'll be uncomfortable, but lower would still be preferred.
Does anyone know how I can get OS X to use a different scale? I have a MBP 4,1 with OS X 10.6.3.
I got a notice of an update for SMCFanControl to version 2.1.3.1. I installed it, and when it ran my fans went faster and louder than ever before! Normally surfing the web they were around 2000rpm. After the update SMC reported 7300rpm! I didn't even think they could go that fast.
View 2 Replies View Relatedget my fist MAC system for home, of course on a limited budget. What would be the minimum set-up (hardware + OS) to allow say 2 users to simultaneusly use Corel painter while the 3rd surfs the web. Also would like the capability to dual boot to Windows.
View 1 Replies View RelatedI'm considering getting the new MacBook Air, and using it mainly as a Windows notebook. So I'm trying to figure out if I can get away with the lower-end 64GB configuration. What's the minimum size I need to give the Mac OSX partition, just so I can boot into it occasionally for bootcamp updates and other such housekeeping tasks?
View 21 Replies View Related