I'm having friends stay with me for a few weeks and want to set up the AE to limit the speed of internet available so they don't stream video all day (I have a data cap)
View 2 RepliesI have a WDS local network at my house. I use a Airport Extreme in my main part of the house and a Airport Express for my back part of the house i.e. the backyard. Now every two weeks or so my internet speed through my Airport Express slows down about half the speed but when I am connected trough the Airport Extreme my speed is normal. I know this because I test my connection very often. Now when I want the Airport Express to get back up to speed I have to unplug, and plug it back in. Then after awhile it starts to slow down again in a time period of two weeks or so.
View 4 Replies View RelatedI'm using a new AirPort Express updated with the latest firmware and AirPort Utility and both my roommate and I have been banging our heads against the wall. Speed to the APE is 130 Mbit/sec and both of our computers are connected to the APE just fine.
This is what the ping looks like. Ping has started ...
PING google.navigation.opendns.com (208.69.32.231): 56 data bytes
64 bytes from 208.69.32.231: icmp_seq=0 ttl=53 time=155.129 ms
64 bytes from 208.69.32.231: icmp_seq=1 ttl=53 time=151.575 ms
64 bytes from 208.69.32.231: icmp_seq=2 ttl=53 time=154.526 ms
64 bytes from 208.69.32.231: icmp_seq=3 ttl=53 time=154.267 ms
64 bytes from 208.69.32.231: icmp_seq=4 ttl=53 time=155.645 ms
64 bytes from 208.69.32.231: icmp_seq=5 ttl=53 time=153.226 ms
64 bytes from 208.69.32.231: icmp_seq=6 ttl=53 time=153.340 ms
64 bytes from 208.69.32.231: icmp_seq=7 ttl=53 time=153.381 ms
64 bytes from 208.69.32.231: icmp_seq=8 ttl=53 time=155.097 ms
64 bytes from 208.69.32.231: icmp_seq=9 ttl=53 time=152.302 ms
64 bytes from 208.69.32.231: icmp_seq=10 ttl=53 time=156.201 ms
64 bytes from 208.69.32.231: icmp_seq=11 ttl=53 time=153.732 ms
64 bytes from 208.69.32.231: icmp_seq=12 ttl=53 time=156.210 ms
64 bytes from 208.69.32.231: icmp_seq=13 ttl=53 time=155.551 ms
64 bytes from 208.69.32.231: icmp_seq=14 ttl=53 time=155.359 ms
--- google.navigation.opendns.com ping statistics ---
15 packets transmitted, 15 packets received, 0% packet loss
round-trip min/avg/max/stddev = 151.575/154.369/156.210/1.359 ms
When I did a speakeasy test, it turned out that I am getting exactly half of our allotted bandwidth. Is there a way to configure this APE to act more like a router that truly shares a connection rather than a splitter that's cutting it in half? Any help would be much appreciated as I'm getting download speeds of 7kb/s and it takes around 15 seconds to load google!!
i'm sharing my internet connection to other devices in my house, but I want to limit speed, because my connection speed is only 2 Mbps. Is there a way to limit speed? I'd like to leave 1 Mbps for me and 1 Mbps for other devices.
View 2 Replies View RelatedAt the moment i'm sharing a house while waiting for some prety serious repair work to be done on mine. therefor im sharing an ADSL line, but its only 568Kbps (ish) and i dont want to use more than my fair share of the somewhat limited bandwidth. Dose anyone know of an app that i can use on my iMac to set a maximum upload and download speed for my connection.
ADSL line -to- BT Voyager Wifi router -to- 1x LAN XP pc and 1x Wifi Vista PC and 1x imac in sig
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I've come home from college for the summer and set up my PC and iMac in my bedroom. However, the wireless signal from the router in the basement (a cisco m10 wireless n router) is very weak and cuts out frequently. I have an Airport Express and was hoping to use it as a wireless repeater/range extender, but can't seem to figure it out. I know there is no "official support" for use as a repeater with non-Apple routers, but is there a way around this? If so, how can I set up my network?
View 1 Replies View RelatedI just purchased my new Airport Extreme (draft-n) and setup was relatively easy when building a simple network. However, after discovering that the Extreme cannot cover the whole house, I've been wanting to use my old Asus WL-530g router as a base and the Extreme to extend the network, or vice versa.
I've tried using the Extreme as the extender to the Asus's network but it gives me this message: "You cannot extend this network"
What can be the problem?
Are there any alternative ways to extend a network?
Can I use the Asus itself to extend the Airport network?
I then whantet to reconnect my Airport Express, witch i use for music in the living room.But i couldent for the life of me find out how to do that, so i thougt, ill just reset the thing, and set it up again.But this is where the problem starts.Every time i try to connect to the Express via the wifi list, the Airport Utility starts up fine, and starts the setup, but then crashes...!It dose this every time, at the same place, when it says "reading previous settings". Im running an iMac with lion 10.7.3 and Airport Utility is version 6.0.
[code]...
I recently moved, and I transferred my comcast high-speed internet service. At my old residence, I used my airport express base station (802.11b/g) with my cable modem, and the internet was quite fast. At my new residence, I set up my network and the speed is quite slow. I initially attributed the problem to Comcast and spent more than an hour on the phone with them this morning. However, I discovered that when I plugged my MBP directly into the cable modem, the internet was blazing fast. So the problem seems to be with the Airport Express.
I'm thinking about just upgrading to an extreme, but I wanted to ask people in the forum to make sure there's not some obvious thing I'm missing so I don't waste my money. I don't really understand why my Airport Express would suddenly become very slow when it was working fine last week, but I don't know how else to explain this problem. I checked my speed using speedtest.net. It measured my download speed as 0.79 Mb/s when connected to airport, and approximately 15.5 Mb/s when connected directly to the cable modem. That's a nearly 20-fold difference!
I have the new Airport Express Base Station and am working it with my Embarq DSL modem. All my Macs are pre-intel based, iMac G5 and iBook G4. I am not getting the DSL speeds I am supposed to be getting. What procedures should I go through with my Airport and Computers to make sure I am getting the maximum download and upload speed possible?
View 4 Replies View RelatedMy current set up includes a cable modem to a Linksys wired router, to an Xbox 360, PS3 and Airport Express. This is the set up I have had for about three months. When downloading files or streaming videos the download speed rarely settles in more than 200 kb/s. My old place had a DSL model, which had a slower internet connection, but the airport express speeds (same set up) were much faster. I have tried directly wiring the computer to the router which unsurprising, resulted in much higher speeds. The things I can think it could be:
1. A lot of wireless networks in the vicinity.
2. Airport express just not up to streaming at height 802.11n speeds, although it is rated for them.
3. Attached to a slower port on the router.
I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?
View 1 Replies View RelatedIm thinking of setting up a AirPort Express or Extreme, unsure which i gonna buy, anyway, i thought id come here and post before going to shops and getting it (due to there isnt a apple shop within 4 hours drive )
I have my internet running through a USB wireless thingy (Sorry)
and i was wondering how/ if i could set it up running through that.
I have a macbook pro and I usualy plug an ethernet cable in it to go on the internet. I just bought an airport express to use the wireless mode.
I copied the exact same settings in airport utility, in the internet section and it dosent work.
Same ip adress, same subnet mask, same router adress, dns servers.
I put COnfigure Ipv4 Manualy
Ethernet WAN Automatic
Connection Sharing BRIDGE
I will be going on vacation in a couple weeks and would like to take my Macbook Pro with me. The only problem I have is the hotel I am staying at charges for WiFi everyday. I would like access to the internet, but I don't feel like paying the money for their WiFi service. If I purchased Airport Express, would I be able to get internet access without having to pay for their fee? I already own Airport Extreme, so buying Express would be worth it for me anyways, I just would like to know if Express could allow me internet access without paying the hotel's fee.
View 8 Replies View RelatedI tried turning on internet sharing to see if it would make things easier, but it didn't. My iPhone found the network my computer created instantly, but the AirPort Express couldn't seem to see it.
Is there any way at all to share an ethernet connection wirelessly through the AirPort Express?
I have just bought an Airport Extreme and Airport express, as I have quite a large house, so needed to boost the signal (plus its quite a remote area, dont get mobile signal, etc).
I have Airport Extreme connected to the Satellite broadband modem by ethernet cable.. has a green light on and is working and connected fine to my macbook air downstairs..
I have also set up the Airport Express upstairs, which is about 30 ft from the Airport Extreme box (wirelessly) - the airport express is also showing a green light.
The iMac that I have is in a bedroom upstairs and is about 18ft from the Airport Express.. however the signal on my imac is only showing 1 bar on the airport icon on my toolbar on my mac? I was using it for a short while, then I had a message saying I wasnt connected??
Surely the iMac should be picking up the express that is only about 18ft away???
when I check under 'Utilties' and Airport, it is showing the Aiport Extreme and Express on my computer, both showing a green light (that was when I had a faint signal).. It sounds as though, my imac is picking the signal maybe from the extreme downstairs??
I have an airport express, which I use as my main router in my secure (WEP2) network. Just out of curosity, how would I see who is logged on in my network (ie: using my airport express)? Is there a widget showing me who's logged on?
View 8 Replies View RelatedI can not find documentation ANYWHERE that explains - specifically - how to configure my Airport Extreme to access the attached USB hard drive from the internet. Has anyone successfully done this? I would like to type in an address and have it go directly to the drive. I think I've done everything in the airport utility that I'm supposed to do, and I've set up a dynamic dns account and opened up port 80.
View 24 Replies View RelatedI was just wondering, If I buy and airport express and use it to extend the wireless signal around my house, can I plug an ethernet cable on it and have that computer use the internet connection coming from it? dsl/cable modem -> airport extreme/time capsule -> airport express -> wired connection -> computer
View 6 Replies View RelatedI have an Airport Extreme Wireless N router (the previous rev that does not have guest network), and an Airport Express Wireless N. My cable modem is, unfortunately, not in the same place where I need my router, since I want to hook my desktop, ethernet printer, and other devices up to the airport extreme router. So, is it possible for me to hook my cable modem up to the Airport Extreme via ethernet, and then somehow connect my Airport Express router to that to get out to the net? I want my laptop to join the router, not the Airport Express, so I can gain access to my printer and files on my server hooked up to that router while still maintaining an internet connection.
View 13 Replies View RelatedI'm using a new AirPort Express updated with the latest firmware and AirPort Utility and both my roommate and I have been banging our heads against the wall. Speed to the APE is 130 Mbit/sec and both of our computers are connected to the APE just fine. This is what the ping looks like Ping has started ..
15 packets transmitted, 15 packets received, 0% packet loss round-trip min/avg/max/stddev = 151.575/154.369/156.210/1.359 ms. When I did a speakeasy test, it turned out that I am getting exactly half of our allotted bandwidth. Is there a way to configure this APE to act more like a router that truly shares a connection rather than a splitter that's cutting it in half?
Is there any way that the default stack memory limit for a user in Mac OS X Lion? You can you ulimit in Terminal.app to display information, you cannot change any values.Â
This is what is returned from ulimit when you try to change the stack memory size.Â
user@MacbookPro:~$ ulimit -s 81920
-bash: ulimit: stack size: cannot modify limit: Operation not permittedÂ
Also, the default value is 8192KB which is approx. 8MB. That is weak, especially on my 2011 iMac with 16GB of RAM. I mainly do scientific programming on my Mac (Fortran). These programs usually require a larger stack size. One option is to allocate data to the heap but that is very slow.Â
I've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies View RelatedI live in a hall at a university and they ban anyone who uses more than 5gb of bandwidth in a day. 48h first time. 14 day for the second time, and then forever.... I was banned for the first time 5 min ago and I realized a badly need a software that alerts me when I get to, let's say, 4gb and then stops the network when I get close to the limit. I wasn't able to find such an application for mac os x
View 16 Replies View RelatedDoes anyone know of a program that will turn off internet access after a person uses a set amount of time? I want my child to be allowed on-line for 3 hrs a day, once they use up this time internet access is not llowed. I think they make this software for PCs but have not been able to find anything for Macs.
View 3 Replies View Relatedi have mac pro with 10.6.2 running and the have a wi-fi router installed to the mac pro via cable ethernet. i also have 2 other computers running windows 7 and they both connect to the internet wirelessly. i want to know if there's a mac program i can installed that allows me to limit the amount of internet usage the other computers are using. the issue is i have a limit of 20GB per month, and would like to let the other computers running windows to each have a internet usage limit of 5GB per month - or if someone knows how to do it via mac os x
View 2 Replies View Relatedi am trying to hook up a mac mini to a local wireless network (airport express) so that i can access a shared iTunes library but i do not want the mac mini to be able to access the internet (other macs on the network need to be able to access the internet). is there a way to change the settings on the mac mini so that this is possible?
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
