it started once when I installed xp. all went fine. I was installing some soft I needed. Now it doesn't want to start. will freeze with phrase like this , with difference of cekunds.
View 3 RepliesLike if I had a .EXE file then instead of starting it up and running the desktop and all that stuff would I be able to just run the program that I needed.
View 1 Replies View RelatedMy 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View RelatedMy Powerbook G4 is not starting up. When I press the startup button, I get the white screen with the grey apple, but that's it. I don't get thr little revolving "wheel" that usually signifies the startup process is working.
Prior to this problem, it was taking a very long time to start up but eventually would start up.
I've tried holding down the option key while pressing the start button- this worked yesterday, but won't work today.
My laptop crashed and refuses to reboot. Ive tried all the keyboard shortcuts without success. I get as far as the white screen with apple logo and the spinning wheel but nothing else happens. When i booted up whilst holding Control V I got a black screen with writing but I did not really understand what it meant.
View 7 Replies View RelatedThe machine I'm having trouble with is a Powerbook G4 17" 1.33GHz with 2GB RAM. This machine has been very well cared for. It's mostly been used as a backup machine of late. When I do need to take it out with me, it's transported in a InCase padded Napa leather case.I mostly use it plugged into AC, and when I have it plugged in for longer than 24h, I remove the battery.
It is running for the most part of the day when in use. And when it is in use, it rests on a Cooler Master fan cooler pad to help with the cooling. I just close the lid when I'm done with it. The only time that it is shutdown or rebooted is when an update or installation requires.
So recently I brought it along to a friend's place, and she borrowed the machine to browse the internet. Being unfamiliar with the sleep function, she shut it down. After this, I cannot get it to start up again. Some of the measures I've taken to try and revive it are:
1. Resetting the PMU (shift-ctrl-option-power, wait 5s, start).
2. Removing AC + battery and holding power for 10s.
3. Reseating the RAM (swapping slots, removing one stick at a time, replacing the RAM with the original 512MB stick).
After all this, I still get nothing. I mean nothing. No chime. No grey screen. No spinning gear. No latch light. No fan. No whirrl-clunk from SD. When I say nothing, I want you understand I'm getting absolutely nothing.
There is a weird thing though. The battery indicator (5 LEDs on bottom of the battery) work. The AC ring indicate fully charged (green ring) and charging (orange ring). With the AC ring indicating charging (orange ring), and I invoke the PMU reset, it momentarily turns green before resuming on orange.
I've tried looking high and low for anyone with remotely the same problem, and can't seem to find anything like this.As far as I can tell, I think it's either a logic board failure or a PRAM battery failure.
Like, when the gray screen turns on, it has a reddish hue. after a couple minutes, colors restore to normal.
then if my screensaver kicks in, and I wake it up, even immediately, I can see that reddish hue and watch it slowly transform into the proper color.
What does this mean? Does it mean that my bought-in-2004 1.33 ghz PowerBook G4 is dying of age? it's nto necessarily the computer itself, but the screen.
y'know how in school, when the overhead projector would start to look brownish? and then a few days/weeks later, *explosion* the bulb has burned out?
I have Parallels 3 installed, mostly to run MS Money. Last night I installed Snow Leopard, unaware that Parallels 3 is not compatible. It appears that I need to go out and buy Parallels 4 as that will work with Snow Leopard.
My question is will all my data within Windows remain if I install 4 or will it be a completely new Windows? And if so, how do I go in and retrieve my MS Money data as I can no longer access it with Parallels 3.
17" Powerbook G4 not starting up (OS X 10.4.11). Powers on, to first login 'user' screen, after entering password, never loads, the 'spotlight' icon appears in the upper righthand corner, and the 'busy' wheel spins when the cursor is moved over it, else nothing. Tried 'X' on startup force OSX startup in vain.
View 1 Replies View Relatedafter i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
View 7 Replies View RelatedIs it possible to set fusion to start windows when i turn the mac on without having to put in passwords ect. this way, i can turn the mac on, and when i come back both operating systems will be running.
View 6 Replies View RelatedI just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
View 1 Replies View RelatedI am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedI have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
I have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
I have spent many hours now trying to get on the internet from Parallels. I read several threads on this forum, searched Google, and poked around my computer as described below, but to no avail.I am using a MacBook with an Intel processor and OS 10.5.8. I am running Windows XP version 2002 via Parallels 5.A list of things I have tried:1. Open Internet Explorer, receive message saying "web page is not available offline; to view click Connect," click Connect, see popup labeled "Dial-up Connection" which is of no use whatever.
View 14 Replies View RelatedI got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point??
View 8 Replies View RelatedI bought my first Macbook Pro 15? and I installed Windows 7 64-bit using bootcamp without any problem. Thereafter, I used Parallels 5 to create a virtual machine for Windows 7 and be able to run Windows 7 within the Snow Leopard OS and be able to move back and forth between the two operating systems. However, Parallels 5 created two virtual machines, one called Boot Camp and one called Windows 7. When I was installing Parallels I chose to create the Windows 7 virtual machine but never asked Parallels to create the Boot Camp virtual machine. Where this other virtual machine is coming from? Am I able to delete it without creating any problem or conflicts? Moreover, I have two shortcut icons on the Mac pointing to either of these two partitions. Similarly I have two windows folders on the right side of the Mac dock. What should I do to have only the Windows 7 virtual machine without creating any problems or conflicts?
View 2 Replies View RelatedRight now, I got Parallels with Windows 7 installed on my mac. But I also want to add bootcamp, so I can open Windows when booted. Is it possible to add the current Windows 7 system files and personal files to a bootcamp? If so, what should I do?
View 1 Replies View RelatedI have the latest build of Parallels 3.0 (build 5636). I use Windows Vista Basic through the Boot Camp partition. Parallels launches Windows with no problems. However, when I try to boot Windows Vista Basic through Boot Camp, the black screen with the green bar and the Microsoft Corporation copyright appears, and then before it switches to the next screen, I get a split second blue screen of death and then the computer reboots itself. I video taped the incident, but since the blue screen of death scrolls the message onto the screen, the computer rebooted before it could tell me what specific file may be corrupted.
I've already tried the following:
1. Booted the computer with the Windows installation DVD to do a "start up" repair attempt.
2. Created a new virtual machine.
3. Done a system restore to before the new version of Parallels was installed.
There was a time when Parallels froze and I had to "force quit" it. That could have corrupted something with the Boot Camp partition. Could that be the case?
I used Boot Camp to put XP on my iMac. If I get Parallels, will it be able to give me access to the files that are on the currently existing XP partition?
Or will I have to re-install XP onto the Mac partition and transfer all my files from the old Boot Camp XP to the new Parallels XP?
I'm having pretty bad difficulties with Windows 7 and Parallels Desktop. I know it's not supported yet, but some folk have it working. I can boot up, but I can't install Parallels Tools. I changed the Configuration to "Windows 2008 Server" like someone suggested in another forum, but fails to boot up.
Seems like VMWare are offering a better helping hand than Parallels Desktop - and while it is not supported yet by them, they say that if you use Windows 2008 Server Config everything works apart from sound.
So am I best giving it a bash with VMWare's Fusion? 30-day trial for free. But I'd rather try get Parallels working since I paid for it.
I have a USB device with a windows driver and application that works fine under bootcamp. No native OSX drivers available for this device. Will I be able to install the drivers and run using Parallels?
View 1 Replies View RelatedJust recently started with a company that uses a SonicWall SOHO3 VPN - the client is Windows based only. I am trying run this on my Windows XP Pro VM in Parallels 5.0 for Mac (I use a MBP with Snow Leopard 10.6.2) and get hung up on the "Acquiring IP" step. Same result in shared or bridged setting on Parallels.
View 4 Replies View RelatedI got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point?
View 1 Replies View RelatedI installed Windows via boot camp and activated smoothly. I then installed Parallels and had it boot off my boot camp partition. It had me activate again, which I did. All was running smooth until a few days ago. When I boot Parallels it says Windows is activated, but when I'm in boot camp it says it isn't. No matter how many times I try to reactivate the boot camp installation it says I need to "type a different product key for registration"
View 3 Replies View RelatedI know Windows 7 is supported Via boot camp, but I can't seem to get it to work. I've searched. Is there some sort of walk through on running Windows 7 in Parallels? My Windows 7 boot camp installation works perfectly, so no problems there. I try to use WIndows 7 in Parallels and it asks me to boot from the CD when configuring Windows 7 OS. I don't have a Parallels disk, but I tried inserting my Windows 7 disk...but no go. Any ideas?
View 11 Replies View Related