im fairly convinced that this release is GM, so i finally took the plunge and installed and all went well. The only issue is when I loaded the desktop there was no icon on the desktop for my hard drive. It is seen as a boot volume and all seems fine except my desktop is blank. Is there a terminal command I can enter to reenable this icon, I created an alias but the arrow is driving me nuts
View 4 Repliesare there any changes between the two??
View 3 Replies View Relatedcan i hide the macintosh icon that's on the desktop? like to have a clean desktop with nothing showing.
View 2 Replies View RelatedI'm new to Mac (two days) and would like on moving mybook harddrive icon from the desktop to the dock. I've tried right click, preferences, but don't see preferences.
View 4 Replies View RelatedThis morning when I turned on my Imac, it presented me with the Mac HD icon, I had to select this to continue with the boot.
I've checked the startup options and the correct (and only) drive is selected, re selected it a few times just in case but this didnt have any effect.
Checked that none of my keyboard keys are sticking by unpluging it during the boot so the keyboard couldn't interfere, still the same.
I've tried a pram reset but don't seem to have any joy getting this to work. I hold the correct sequence of keys down just after the chimes ( cmd, option p and r) but that doesn't seem to get me the 2nd chime. Have no idea what I'm doing wrong.
Is this a sign my HDD is going? I use the system for a lot of video editing and photo editing, could this amout of usuage cause any problems
Info:
iMac, Mac OS X (10.6.8)
At the very worst, I think this is the last non-GM build. But between now and the launch of Snow Leopard, how much can really be changed? Then again, a lot of people find it hard to believe Apple would seed the GM to tons of deveopers before the launch of Snow leopard, for fear that it would leak (and it has).
View 22 Replies View RelatedIt has never been answered explicitly, so just give me a yes or no, and ONLY if you have installed it from the retail box. Is 10A432 the GM-build, yes or no?
View 6 Replies View RelatedI haven't seen any post about that, but seems that the last Snow Leopard build, 10A432 comes with a new version of its Bootcamp drivers and it is now compatible with Windows 7. Have anyone tried that ?
PD: I found the drivers in a forum, I don't know if it is ok to post the link, but here it goes:(URL)
Since i've been running the 10A432 build of snow leopard I have noticed that my iPhone will not sync with iTunes. Is this just because iTunes will need updating to bring new kext files??
View 4 Replies View RelatedHad leopard, upgraded to 10a432 snow leopard, if that's not the GM can I upgrade to it from there? I'm hearing not... I had a santa rosa 2007 mbp and bought the leopard upgrade disk (got it around leopard launch), it messed up too many times, got an early 2008 mbp replacement with leopard on it, upgraded that to 10a432. so i only have a leopard upgrade disk and 10a432. halp?
View 7 Replies View RelatedFor some reason I thought it would be a good idea to upgrade to SL ahead of time, mainly due to impatience! However I now have no internet connection, it shows I have an IP address and everything works fine in windows on my MBP however when I boot to SL no go... Have tried re-installing and no luck...
View 7 Replies View Related[URL] Insert Retailing DVD and open Disk Utility, then select the DVD and follow the above image MD5 of ADC's 10a432 is (snowleopard_10a432_userdvd.dmg) - 1d1fb7eca55470143c153f7f902b4ada
View 24 Replies View RelatedI almost upgraded my 10.5.8 after all the reports of how stable/fast 10A432 is. Now I am glad that I didn't - after installing on an external partition and booting up (and migrating my settings and apps), there is a big Wifi problem. SL sees the network and connects to it, gets an IP, however I cannot access anything on the internet, nor ping any sites from Terminal. When I boot back into 10.5.8 it works. Restarting the router/modem has no effect, and it does this at home and at the office. I see these guys are having the same issue: [URL] Any idea what's up and how to solve this? I sure hope now that this is NOT the GM.
View 2 Replies View RelatedI've been using the pre-release 10A432 Snow Leopard, and had problems installing the Bootcamp 3 drivers in Windows 7 x64. I had to disable UAC and run the 64 bit installer manually to get them to install...
Though the final release of snow leopard is also 10A432, are the bootcamp 3 drivers included on the final cd the same?
If 10A432 is installed, is there any need to reinstall a 10.6 retail copy, or for all intents and purposes am I fine and will 10.6.1 and future updates still work for me?
View 4 Replies View RelatedAre the drivers updated/different on this new release?
View 7 Replies View RelatedLet's have a list of applications that currently don't work under Snow Leopard 10A432.
CandyBar 3.1.2 - Unstable, becomes unresponsive after some time. Cannot scroll through installed icons.
Glims - Installs, but doesn't show up in Safari preferences.
Inquisitor - Installs, but doesn't show up in Safari preferences.
DNS-323 NAS Samba access is also broken in Snow Leopard. I can confirm this.
I just noticed, that the built-in video-cams on two iMacs (one white 20" and one aluminum 24") do not work.
System Profiler is not detecting a video-cam. I guess, this probably confirms that this is not the GM build. Does anyone have a solution to enabling the video-cams?
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedI just dragged and dropped my icon into the middle of the screen and now it's gone?How to make it appear again?
View 5 Replies View RelatedHow do you change the hard drive icon picture in the top right corner to look like the macbook pro computer? I've seen this on a couple people's desktops and was just wondering how you do it. Also, how do you change the folder icon to something that looks cooler.
View 3 Replies View RelatedSo i bought this new 500GB external HD but whenever i tried to put my files in it from my mac it wont allow me and say, "This item could not be moved because [harddrive] cannot be modified." however if i connect it to my windows it works fine.
P.S just one stupid question, why would a 500GB HD has less capacity such as 470 or so; and sometimes 8GB USB will only have 7.5 G etc.
Will my Mac be able to use this external?
[URL]
I heard that it can't and you need to by the Mac only one. Does it make a difference?
Ever since I ran Onyx last week, mds keeps reading from my harddrive at about 2mb/second.For example I've only had my computer open for a couple of hours and done very little, just some browsing, and Activity Monitor shows 7.52GB read and 6.44GB written
View 4 Replies View RelatedSorry if this is in the wrong place, its my first post here..
I used to use my HP external drive for time machine, but since i got a new bigger WD one to use with time machine i have wiped the HP using disk utility but it is still showing up on the desktop with a time machine icon. i think i can still use it like a normal hard drive but it is causing a bit of confusion and its really irritating!! is there any way that i can change it back? i've tried wiping it a few more times but it still won't work..
Every few minutes my 13" MBP completely stalls, video and music pauses, can't do anything with my MBP and the mouse icon turns into that waiting icon. I don't know what it's called but it's round with colours inside it.Anyways, it stops me from what I'm doing for about 20 seconds and happens every few minutes and it's beginning to annoy me now!
View 10 Replies View RelatedI love Mail but have become bored of the icon. Is it possible to change the icon the the Postbox one? still with the notifications on the dock.
Here's Postbox if you don't know what it is: [URL]
I've just downloaded Safari 5.1.5 and want to create this icon on my desktop, however, I don't want it as a 'short-cut' icon but as the same icon I see on the docking station.I was previously able to do this with Safari 5.0.3.
View 9 Replies View RelatedI have this icon behind the Application icon on the dock and I cannot figure out what it is. It is not something on the desktop as I have moved the dock and can't see it, so it is definitely connected with the Application icon. I have deleted all downloads which could have been half done and I have removed an Alias I had in the Application folder. Now all the Applications appears as "Applications" in the "Kind" column when viewing in Finder.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Here is my dilemma I bought a g3 600mhz on ebay for 90 dollars works beautifully updated the memory to 640mb need to change the dvd drive and would like a bigger harddrive however i do not have the restore discs that came with it. I am currently running 10.4.11 tiger and can't afford the full version. How can I just clone the harddrive to the new one???
View 1 Replies View Related