Windows On Mac :: Snow Leopard 10A432 Bootcamp Drivers
Aug 16, 2009Are the drivers updated/different on this new release?
View 7 RepliesAre the drivers updated/different on this new release?
View 7 RepliesI've been using the pre-release 10A432 Snow Leopard, and had problems installing the Bootcamp 3 drivers in Windows 7 x64. I had to disable UAC and run the 64 bit installer manually to get them to install...
Though the final release of snow leopard is also 10A432, are the bootcamp 3 drivers included on the final cd the same?
I just noticed, that the built-in video-cams on two iMacs (one white 20" and one aluminum 24") do not work.
System Profiler is not detecting a video-cam. I guess, this probably confirms that this is not the GM build. Does anyone have a solution to enabling the video-cams?
I know this is probably a stupid question. I'm about to set up windows 7 on my iMac. I've recently updated to Snow leopard. My question is once I have windows 7 installed do I have to use the snow leopard disk, or the disk that came with my computer to load drivers?
View 13 Replies View RelatedI have a new 21.5 Imac (with the ATI Radeon HD 4670) on which I have just installed Windows 7 32 bit version. Everything worked great and upon starting Windows 7 for the first time my network is working, the ATI 4670 drivers seem to be installed automatically and also sound drivers seem to be there, everything of this Windows 7 did automatically. So my question is: why do I need the Bootcamp drivers from the Snow Leopard disk, what extra value will they provide? Can it hurt my computer all togehter if I skip the drivers from the Snow Leopard disk? will it perhaps have drivers other than above that are absolutely needed for the system to function properly?
View 1 Replies View RelatedI haven't seen any post about that, but seems that the last Snow Leopard build, 10A432 comes with a new version of its Bootcamp drivers and it is now compatible with Windows 7. Have anyone tried that ?
PD: I found the drivers in a forum, I don't know if it is ok to post the link, but here it goes:(URL)
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
I have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View RelatedHad leopard, upgraded to 10a432 snow leopard, if that's not the GM can I upgrade to it from there? I'm hearing not... I had a santa rosa 2007 mbp and bought the leopard upgrade disk (got it around leopard launch), it messed up too many times, got an early 2008 mbp replacement with leopard on it, upgraded that to 10a432. so i only have a leopard upgrade disk and 10a432. halp?
View 7 Replies View RelatedLet's have a list of applications that currently don't work under Snow Leopard 10A432.
CandyBar 3.1.2 - Unstable, becomes unresponsive after some time. Cannot scroll through installed icons.
Glims - Installs, but doesn't show up in Safari preferences.
Inquisitor - Installs, but doesn't show up in Safari preferences.
DNS-323 NAS Samba access is also broken in Snow Leopard. I can confirm this.
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedWill they improve battery management/heat management?
View 10 Replies View Relatedjust started using Mac OS recently
AFAIK, I will be needing the snowleopard installation cd for the drivers in windows after I finish installing windows(xp). However, I bought this MBP from ebay so it came with leopard cd only but with snowleopard installed on the macchine.
So I am wondering if leopard cd works as well to obtain drivers for the windows?
I have a unibody 13" MacBook running Leopard with Bootcamp running Windows Vista. I want to try and make the move this weekend to both Snow Leopard AND Windows 7.
First, what is my best plan of attack here? Will Snow Leopard install just fine and ignore my current 25gb partition of Vista currently set up? (i.e. not effect it at all). I would assume so but I'm not totally sure.
Second, what is the best way to go about installing Windows 7? I am a university student and I will be getting the $30 upgrade version of Windows 7. I've heard that doing a clean install is the best way to go instead of going over vista, so I hear I need to make an iso out of the upgrade version and use that?
I'm planning on doing Snow Leopard first, then Windows 7 second as this seems like the most logical order for me.
I installed a beta version if windows 7 into my computer last night. Now everytime I want to use snow leopard I have to use press the option button. Windows boots automatically. I took windows off and now snow leopard wont work at all. The screen just goes black and it says a few words like install. How do i get snow leopard to start when I turn my computer on?
View 4 Replies View RelatedI find myself using Mac OS X Leopard less and less and windows almost all the time these days and on the occasion that I need leopard i find it suits me fine. I want to be as up to date with boot camp as possible but don't want to upgrade to snow leopard (I need the current version of Quicktime for my video editing software so cant risk going to QT-X) so can i install Bootcamp 3.0 without installing SL? I really want to be able to read my Mac drives (I need my itunes!!) from Windows.
View 10 Replies View RelatedI can install snow leopard clean on a fresh drive on my MBP with my upgrade disk. It is the disk that came as a drop-in dvd with the MBP, along with its original install disks. If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation? Or do I use my leopard install disks that came with my computer? Is the snow leopard bootcamp process any different from the process in leopard? I had windows Vista on there fine before upgrading my hard drive and going to snow leopard. Do I need to print out those 25 pages again?
View 1 Replies View RelatedI'm by no means very tech savvy. When I tried to install Windows XP (Home Edition) on my Macbook Pro via bootcamp, I experienced a bit of trouble. I partitioned the hard drive as instructed, then inserted the Windows XP installation disk and hit continue. This is when the computer more or less took over and started doing it's own thing. After a while the screen went blue and the windows install prompts were flashing across the screen. At this point I'm still thinking all is good; I accepted the terms of use etc.
However, once the install was complete, it kept asking me to insert the Windows XP Home edition CD. Even though it was already in the disk drive. I tried to hit continue but it kept taking me back to the screen asking for the disk to be inserted. Eventually I quit out of the install (upon doing so the screen prompted me the install did not work), ejected the windows install cd, and restarted my computer back into osx. Is the newest version of osx, snow leopard, not compatible with microsoft xp? Do I need to purchase vista or windows 7 if I am to run boot camp successfully?
I'm using the Snow Leopard Develpoer Preview, and the latest installer Image I have is 10A380, however everytime I installed the Win 7 (X64) and wanna install the Bootcamp 3.0, it just crashes after installing NV graphic driver and told me restart the computer and continue, but when I followed instruction and reinstall the Bootcamp, it just crashed again...
View 9 Replies View RelatedI just installed Windows XP via Bootcamp and when I go into Windows and try to insert my mac OS X snow leopard it does not show up?
View 11 Replies View RelatedI have a 2010 MBP andi lost the Mac OSX install disk and don't have the drivers anymore could somebody please upload them so I can get them.
View 2 Replies View RelatedNot sure if this is the right section to post it, but anyway.I know that officially, Win 7 isn't yet supported by BC, but can easily be installed. Is it safe? Are some things broken? Are there drivers?I kinda need to install Windows in a hurry. If something is wrong with Win 7 under BC then I'll have to install XP
View 1 Replies View RelatedI upgraded to Snow Leopard 10.6 and when I went to delete my windows partition boot camp could not find it. Is there a way to delete the partition?
View 3 Replies View RelatedI want to make a clean reinstall of snow leopard without removing my bootcamp partition. Is it possible to do that and to continue using windows after the reinstall?
View 1 Replies View Relatedrealised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
I've read that Windows XP Service Pack 2 included support for both firewire 400 and 800 interfaces (up from just fw400 before), but the included update reduces the speeds on these to around 100mbps (well under their capabilities, and slower than USB!). That's with default XP drivers though, supposedly. My question is, does Bootcamp come with the drivers to make fw800 full speed? I want to run a couple high-stress games from my external drive to my MBP (Battlefield 2 and 2142), so I was wondering if anyone experienced problems with firewire speeds under XP.
View 10 Replies View RelatedI just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies View RelatedI've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies View Related