When I updated my MacBook Air software from 10.6.8 to Maverick I lost all my videos in the process. Where did they go and how do I get them back? Did they all end up in various events folders in iphoto? They used to also be separate from the photos in the video folder on the harddrive but are no longer there.
Info:
MacBook Air, OS X Mavericks (10.9.3)
I have a problem with my iMac. I have on a second partition lion installed. Everything worked great, but since I updated to 10.7.4 booting needs about 5 minutes. Already checked the partition and the access rights.
View 9 Replies View RelatedI have an Intel Core 2 Duo 3.06 GHz Imac and I am running Snow Leoprad 10.6.8. The problem I am having is that since I recently updated Safari, I cannot run Youtube videos. Every time I try watching one, the page crashes. I know I am not alone here and I am surprised Apple has not approached this situation yet. I have tried running youtube videos on Firefox and have had no problems doing so, thus I figure it must be Safari. I've tried running safari in 32 bit mode and that is also not fine. I have emptied the cache and reset Safari as well but still no go.
Info:
iMac, Mac OS X (10.6.8)
I have just updated my Macbook to Safari 6.1.4. Since doing this I cant load any Youtube Video's. Have tried everything youtube has suggested, & nothing is working.
Info:
MacBook, OS X Mountain Lion (10.8.5)
I bought my first mac last month , it was 1year old and came restored to factory condition osx 10.5.4 .All was well until after i updated to mac osx combined 10.5.8. I liked the updated safari but lost my iphoto so had to restore back to factory.now i have all my programs back but cant update anymore, it just tells me that it will need to restart then hangs for hours saying configuring instillation .If i try updating using installer it tells me that i cant .
View 5 Replies View RelatedI recently updated to Lion and now when I open videos in email I have sound but no picture.
View 6 Replies View RelatedI have not been able to compete a burn process
Info:
MacBook Pro, OS X Mavericks (10.9.4)
In the past if I had a QT video on my desktop and wanted to put it into iTunes, I had to use iSquint to convert it and then move it over to iTunes. Problem with that is, quality is lost in the conversion. Does anyone know if QTX can replace iSquint and convert all those QT files for me for iTunes and iPhone usage? And if so, does it retain the quality of the file, unlike iSquint?
View 2 Replies View RelatedI just updated to OS X 10.9.2 and photos are missing now...what can i do
View 6 Replies View RelatedI Just updated to OSX and now cannot connect to my wifi. It's not the wifi system because I can still use my phone on wifi. What changed and how do I connect to wifi.
View 1 Replies View RelatedSaved my .AI file I was working on, the power shut down in the office and when I restarted my computer, the file was 2 previous saves before. I lost important info. Is there a way to find a hidden file from somewhere in outer space to access the most saved version of the file. I DO save my files often to avoid some basic issues, but this one seems like a software glitch.
Info:
iMac, OS X Mavericks (10.9.4)
(Aug. 21, 2014)I just updated to OS-X Maverick 10.9.4, and now I get a guest user option at login. I never saw this before and didn't change any settings.
Could I have been hacked?
Info:
iMac, OS X Mavericks (10.9.4)
[URL]
Trying to install OS X Server and it says that I have to update to 10.9.3
Which I did as you can see.
I Rebooted again doing a Command/Option/ P R to insure that all cache memory was deleted and Still it will not show the update for 10.9.3
What can I do now to force it to read 10.9.3
Info:
Mac Pro, OS X Mavericks (10.9.3), 8 Core 8 Gigs of RAM
Problem is pretty much summarized in the topic line. Had a distnoted process that was eating up all my CPU. Killed it in Activity Monitor, and the computer hung. Forced a restart, and it won't...restart. Tried a safe reboot, resetting the NRAM...no joy. Â
2012 (I believe) iMac running the latest version of OS X Mavericks.Â
10.9.4 with Epson WF 845. Queue opens, job appears to process out of the queue and the queue closes. Nothing happens at the printer. Only the one printer on the network. Have deleted & added the printer. Have reset the printer system. Printer wired through a Linksys WRT 1900AC and computers are wireless to the same router. Worked fine until the last day or so.
Info:
iMac, OS X Mavericks (10.9.4), Epson WF 845, Linksys WRT 1900AC
I work everyday with my 21.5' iMac and it had OS Lion before I updated to Mavericks last month. As I work with lots of files, I have also a 1TB Lacie external drive pluged into it via firewire and I constantly access these files. After I updated though, I'm experiencing a strange problem. Everytime I search for a file on Finder, all the results that come up can't be edited or even selected. This is driving me crazy because I must open another tab and go all the way through the file I want as I can't select any file from the searches. All the search results come up written in gray color and with a empty circle on its left side. I can't even click on them! For better explanation, here is a picture of what happens:
Before the update, I used to normally access every result the search came up to.
I have another iMac here in the network with Mavericks too and all the searches returns with selectable and editable results.
Info:
iMac, OS X Mavericks (10.9.4)
What I mean is that the link will open the browser (which ever one is set as default,) but the browser opens to the home page instead of going to the page specified by the link in the email. it is not because I haven't set a default browser.
View 4 Replies View RelatedI have a Mac Pro with several raid array and single drives attached (1x Wiebetech RTX600 Raid 5 through SCSI; 1x CalDigit HDElement Raid 5 through miniSAS; 4x internal drives).Unfortunately, due to various reasons (electricity outtage and software crashes), I'm experiencing system crashes and need to hard re-start the system. Upon restart, I am able to boot back into Mac OS X, but sometimes one, or both of the raid arrays will not mount.However, after a period of 0.5 - 2 hours, the array would magically re-appear again. Sometimes this might even happen to internal drives that I had mounted inside the chassis of the Mac Pro.
View 2 Replies View RelatedI am wondering if anyone knows of a good osx based alternative to Process Explorer on windows - what I'd like to be able to do is graph CPU and memory for a specific process and ideally see what network connections a specific process has open. atMonitor seems to do this pretty well generally, but not for specific processes (this is for monitoring a multiplayer flash game).
View 3 Replies View RelatedAfter the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
i had stored all my passwords and other details on my ipassword saver but had punched more than 10 time the password and found all the datas have dis appeared .. how do i get back all my data.
View 1 Replies View RelatedScrolling down to Quit, accidentally hit something else, and haven't been able to see any mailboxes since.
Info:
MacBook Air, OS X Mavericks (10.9.2)
I lost my second monitor when I upgraded to 10.9.4 from 10.9.2 a few months ago.I went back to OS X 10.9.2 and it works fine right now, but I would like to upgrade to Max OS X 10.9.4Â hoping Apple has fixed the problem.Present infoOS X 10.9.2 (13C1021) 2 x 3 GHz Quad-Core Intel Xeon. Memory 14 GB 800 MHz DDR2 FB-DIMMNVIDIA GeForce GTX 680 4096 MBAJA KONA 3There is a new CUDA driver. But NVDIA said that CUDA has nothing to do with a second monitor and speak to Apple. Who do I call?
[URL]
I'm using it for video editing.Â
This happened before when I upgraded last year but now I have the new NVDIA card
I've just moved from Snow Leopard to Mavericks, and all the mailbox contents (that is, those in boxes in "On My Mac") have vanished. I've tried going to user/Library/Mail/subfolder1 as others have suggested, but I don't have Mail in this Library folder. How do I fix this, if possible, via Time Machine backups? Or any other way, for that matter. Â
View 1 Replies View RelatedScrolling down to Quit, accidentally hit something else, and haven't been able to see any mailboxes since.
Info:
MacBook Air, OS X Mavericks (10.9.2)
well, they aren't lost, but everything is offline. i just want to restore my email settings! i have aw iMac no disc drive. tried to restart in recovery mode (control R) but nothing happened
View 2 Replies View RelatedI recently upgraded and enabled iPhoto and started ICloud syncing for my photo stream. When I open Mail now, I have lost all my signatures and the filtering rules I had set up for incoming mail. How is this connected, and how can I get back my sigs and rules?
Info:
OS X Mavericks (10.9.4), iPad Air
Came in this AM to find power had been lost some time last night. After I booted up, I could not see anything in my Documents folder... I get a message "The folder 'Documents' can't be opened because you don't have permission to see the contents." Permissions seem to be fine:Â
flamingo:~ jnojr$ ls -lde Documents/
drwx------+ 54 jnojr staff 1836 Jun 24 15:34 Documents/
0: group:admin allow list
group:everyone deny list,delete...I also cannot see it in my Time Machine, even for older dates when everything was OK. I can see the contents with an account with sudo privileges. I verified and repaired permissions. I booted into safe mode and ran an fsck Googling led to several discussions where people were using different UIDs or had otherwise lost privileges, which does not appear to be the case here.
I personalize my menu bar and I removed the wifi icon by accident and I go into system Prefences/Netowk and I don't see the option to readd the wifi icon! Menu Bar
Info:
MacBook Pro, OS X Mavericks (10.9.3), Mac Early 2008
I've just upgraded from 10.6.8 to 10.9.3 and am very disappointed to see that everything in the sidebar is shown in shades of gray. I've used FolderBrander for many years to color code my finder folders and it was great that the folder colors also appeared in the sidebar in 10.6.8. I could group associated folders by color in the sidebar and that made for very rapid and accurate access deep into my folder architecture. I am mourning this lost functionality. how I could send this dissatisfaction along to Apple along with a request to restore colors to the sidebar?
View 10 Replies View Related